Motherboard Temp for the Asus Maximus VI Formula

Feklar · August 9, 2013

I was able to monitor MB temp with the Asus Maximus VI Hero but after swapping for the Maximus VI Formula, no more MB temp. Bios shows MB temp though. Perhaps next beta?

Fiery · August 9, 2013

Make sure to upgrade to the latest beta version of AIDA64 Extreme Edition available at:

http://www.aida64.com/downloads/aida64extremebuild2566j5wh1ysmcqzip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

If it doesn't help, then please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic.

Also right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> Embedded Controller Dump. Copy-paste the full results into this topic.

Thanks,

Fiery

Feklar · August 10, 2013

Thanks for the reply. I am running the current beta version. Here are the results you requested:

------[ AIDA64 v3.00.2566 Beta ]------

------[ Microsoft Windows 7 Professional 6.1.7601.18113 Service Pack 1 (64-bit) ]------

------[ Motherboard Info ]------

Motherboard ID : 63-0100-000001-00101111-041312-Chipset$1AQQW024_BIOS DATE: 07/09/13 13:48:24 VER: 07.14

Motherboard Model : Asus Maximus VI Formula

Motherboard Chipset : Intel Lynx Point Z87, Intel Haswell

DMI MB Manufacturer : ASUSTeK COMPUTER INC.

DMI MB Product : MAXIMUS VI FORMULA

DMI MB Version : Rev 1.xx

DMI MB Serial : 130713206300525

DMI SYS Manufacturer: ASUS

DMI SYS Product : All Series

DMI SYS Version : System Version

DMI SYS Serial : System Serial Number

DMI BIOS Version : 0714

ITE 87xx Port = 00h

ITE 87xx HWMonitor Port = 0000h

ITE 87xx Device ID = 0000h

ITE 87xx Version = 00h

Winbond SuperIO Port = 2Eh

Winbond SuperIO HWMonitor Port/60 = 0290h

Winbond SuperIO HWMonitor Port/64 = 0A00h

Winbond SuperIO Device ID = C803h

Winbond Sensor ID A3/5C/reg$58 = FF / FF / FF

Fintek SuperIO Port = 00h

Fintek SuperIO HWMonitor Port = 0000h

Fintek SuperIO Device ID = 0000h

LPC47 SuperIO HWMonitor Port = 0000h

LPC47 SuperIO Device ID = FFFFh

------[ NCT6791 ISA Sensor Device at 0A00 ]------

0000 6E 7E D0 D0 7E F4 45 D7 D2 80 00 68 46 45 46 00

0010 16 18 35 80 23 34 00 24 40 19 18 19 19 34 35 30

0020 16 02 FF FF FF FF 00 00 00 00 00 00 00 00 FF 1F

0030 FF 1F FF 1F FF 1F FF 1F FF 1F 00 00 00 00 00 00

0040 00 00 00 00 00 00 00 00 00 00 00 00 FF FF FF FF

0050 FF FF 1A 40 00 00 00 00 00 00 00 00 00 00 00 00

0060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0070 00 18 00 FF 00 FF FF FF FF FF FF FF FF FF FF FF

0080 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

------[ ACPI Temperatures & Fans ]------

_TZ_.THM0._TMP :

_TZ_.THM1._TMP :

_TZ_.THR0._TMP :

_TZ_.THR1._TMP :

_TZ_.TZ00._TMP : <TYPE>0</TYPE><LEN>4</LEN><DATA>3010</DATA>

_TZ_.TZ01._TMP : <TYPE>0</TYPE><LEN>4</LEN><DATA>3030</DATA>

_TZ_.RTMP :

_TZ_.RFAN :

_TZ_.RFAN(0) :

_TZ_.RFAN(1) :

_SB_.ATKD._HID :

_SB_.ATKD.TMPR :

_SB_.PCI0.LPC0.EC0_.CCTV :

_SB_.PCI0.LPC0.EC0_.LRPM :

_SB_.PCI0.LPC0.EC0_.HRPM :

_SB_.PCI0.SBRG.EC0_.ECPU :

_SB_.PCI0.SBRG.EC0_.TACH(0):

_SB_.PCI0.SBRG.EC0_.TACH(1):

_SB_.PCI0.SBRG.EC0_.TAH0 :

_SB_.PCI0.SBRG.EC0_.TAH1 :

_SB_.PCI0.SBRG.EC0_.ST00 :

_SB_.PCI0.SBRG.EC0_.SC01 :

_SB_.PCI0.SBRG.EC0_.SC02 :

_SB_.PCI0.SBRG.EC0_.SC03 :

_SB_.PCI0.SBRG.EC0_.SC04 :

_SB_.PCI0.SBRG.EC0_.SC05 :

_SB_.PCI0.SBRG.EC0_.SC06 :

_SB_.PCI0.PIB_.EC0_.TCRT :

_SB_.PCI0.SBRG.EC0_.CTPM :

_SB_.PCI0.SBRG.EC__.CPUT :

_SB_.PCI0.SBRG.EC__.SYST :

_SB_.PCI0.LPC_.EC0_.CTMP :

_SB_.PCI0.LPCB.EC0_.CTMP :

_SB_.PCI0.LPC_.EC0_.TMP1 :

_SB_.PCI0.LPC_.EC0_.TMP2 :

_SB_.PCI0.LPC_.EC0_.TMPI :

_SB_.PCI0.LPC_.EC0_.TMPV :

_SB_.PCI0.LPCB.EC0_.A1TP :

_SB_.PCI0.LPCB.EC0_.A2TP :

_SB_.PCI0.LPCB.EC0_.FAN0 :

_SB_.PCI0.LPCB.EC__.TS1R :

_SB_.PCI0.LPCB.EC__.TS2R :

_SB_.PCI0.LPCB.EC__.TS3R :

_SB_.PCI0.LPCB.EC__.F1FL :

_SB_.PCI0.LPCB.EC__.F1FH :

_SB_.PCI0.LPCB.EC__.F2FL :

_SB_.PCI0.LPCB.EC__.F2FH :

_SB_.PCI0.LPC_.H8EC.RTMP :

_SB_.PCI0.LPC_.H8EC.LTMP :

_SB_.PCI0.LPC_.H8EC.MTMP :

_SB_.PCI0.LPC_.H8EC.GTMP :

_SB_.PCI0.LPCB.H8EC.CTMP :

_SB_.PCI0.LPCB.H8EC.DTMP :

_SB_.PCI0.LPCB.H8EC.GTMP :

_SB_.PCI0.LPCB.H8EC.ITMP :

_SB_.PCI0.LPCB.H8EC.MTMP :

_SB_.PCI0.LPCB.H8EC.STMP :

_SB_.PCI0.LPCB.H8EC.PFAN :

_SB_.PCI0.LPCB.EC0_.OTPC :

_SB_.PCI0.LPCB.EC0_.VGAT :

_SB_.PCI0.LPCB.EC0_.CHPT :

_SB_.PCI0.LPCB.EC0_.CPUT :

_SB_.PCI0.LPCB.EC0_.SYST :

_SB_.PCI0.LPCB.EC0_.DTS1 :

_SB_.PCI0.LPCB.EC0_.DTS2 :

_SB_.PCI0.LPCB.EC0_.DIMM :

_SB_.PCI0.LPCB.EC0_.FANH :

_SB_.PCI0.LPCB.EC0_.FANL :

_SB_.PCI0.LPCB.EC0_.CUTP :

_SB_.PCI0.LPCB.EC0_.PHTP :

_SB_.PCI0.LPCB.EC0_.DIMT :

_SB_.PCI0.LPCB.EC0_.INLE :

_SB_.PCI0.LPCB.EC0_.PANT :

_SB_.PCI0.LPCB.EC0_.F0RM :

_SB_.PCI0.LPCB.EC0_.F0DT :

_SB_.PCI0.LPCB.EC0_.F1RM :

_SB_.PCI0.LPCB.EC0_.F1DT :

Also the second results:

------[ AIDA64 v3.00.2566 Beta ]------

------[ Microsoft Windows 7 Professional 6.1.7601.18113 Service Pack 1 (64-bit) ]------

------[ Motherboard Info ]------

Motherboard ID : 63-0100-000001-00101111-041312-Chipset$1AQQW024_BIOS DATE: 07/09/13 13:48:24 VER: 07.14

Motherboard Model : Asus Maximus VI Formula

Motherboard Chipset : Intel Lynx Point Z87, Intel Haswell

DMI MB Manufacturer : ASUSTeK COMPUTER INC.

DMI MB Product : MAXIMUS VI FORMULA

DMI MB Version : Rev 1.xx

DMI MB Serial : 130713206300525

DMI SYS Manufacturer: ASUS

DMI SYS Product : All Series

DMI SYS Version : System Version

DMI SYS Serial : System Serial Number

DMI BIOS Version : 0714

------[ Embedded Controller at 0066/0062 via Port I/O / Bank #0 ]------

0000 00 80 60 93 83 00 00 00 00 00 00 00 00 00 00 00 ..`.............

0010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0030 00 00 00 00 00 00 00 00 00 00 19 16 0C 00 00 00 ................

0040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0050 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0060 00 00 1C 00 00 FF 00 00 00 00 00 00 00 1B 00 00 ................

0070 FF 00 00 00 00 00 00 00 1A 00 00 FF 00 00 00 00 ................

0080 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00 00 ................

0090 53 40 50 C0 4A C0 80 00 50 C0 47 C0 59 80 AC 40 S@P.J...P.G.Y..@

00A0 A8 00 A4 40 FF C0 FF 80 FF C0 B2 80 00 80 AE 80 ...@............

00B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00C0 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 ................

00D0 40 00 50 C5 01 00 00 00 9B 80 00 06 07 AF 08 02 @.P.............

00E0 00 00 00 00 03 00 05 01 00 7E 00 00 09 79 00 14 .........~...y..

00F0 00 0C 0C 55 03 EA 00 00 0A 00 00 00 00 00 00 00 ...U............

------[ Embedded Controller at 0066/0062 via Port I/O / Bank #1 ]------

0000 29 A0 28 60 25 60 40 00 28 60 47 C0 2C C0 00 1A ).(`%`@.(`G.,...

0010 00 1C 00 1E FF D8 FF D8 FF D8 00 17 00 40 00 19 .............@..

0020 00 5A 5A 5A 5A 5A 00 5A 00 01 00 01 00 01 00 01 .ZZZZZ.Z........

0030 00 01 00 00 00 01 00 00 00 F0 01 20 00 A8 00 A8 ........... ....

0040 00 C0 00 E0 00 A8 00 80 00 00 00 00 00 00 00 00 ................

0050 00 00 01 FF 01 FF 01 FF 00 00 00 00 00 00 00 00 ................

0060 00 00 00 A0 00 00 00 00 00 00 00 00 00 00 00 00 ................

0070 00 00 00 00 00 00 00 00 01 FF 01 FF 01 FF 01 FF ................

0080 01 FF 01 E0 01 FF 01 FF 01 FF 01 FF 01 FF 01 FF ................

0090 01 FF 01 FF 01 FF 01 FF 00 00 00 00 00 00 00 00 ................

00A0 00 00 00 00 00 00 00 00 00 00 00 00 27 50 23 00 ............'P#.

00B0 00 00 00 00 03 EA 01 E8 00 A0 01 5E 01 2C 00 A0 ...........^.,..

00C0 00 00 01 E0 00 F0 01 40 00 00 00 00 00 00 00 00 .......@........

00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00E0 EC 00 00 00 34 6B 47 00 00 00 00 00 00 00 00 00 ....4kG.........

00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 ................

------[ Embedded Controller at 0066/0062 via Port I/O / Bank #2 ]------

0000 2E 40 5B BA CA FF 00 23 FF FF DE 00 01 E7 FF 00 .@[....#........

0010 80 00 00 AC FF 88 BF FF E1 00 FF 50 B1 60 26 E1 ...........P.`&.

0020 FF FF 30 48 E2 01 01 04 00 1C 20 00 00 00 00 00 ..0H...... .....

0030 00 00 00 00 00 00 00 00 00 00 00 00 06 00 00 00 ................

0040 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 ................

0050 00 A8 00 A8 00 DB 00 00 C0 08 00 00 C0 08 00 00 ................

0060 00 00 00 00 00 10 40 00 00 00 00 00 00 00 00 00 ......@.........

0070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

0080 FF 00 FF FF 00 E7 FF 00 03 64 10 B0 00 00 00 00 .........d......

0090 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00A0 01 68 00 00 01 2C 00 00 00 00 00 00 00 00 00 00 .h...,..........

00B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00E0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

00F0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

Time #1 = 639

Time #2 = 0

Thanks for the help Fiery.

Fiery · August 11, 2013

Thank you. We'll implement sensor tweakings for your motherboard in the next AIDA64 beta release due in a few days. I'll post a message into this topic once the new AIDA64 beta is available for download.

Feklar · August 11, 2013

Thanks very much!

Fiery · August 14, 2013

The mentioned new AIDA64 beta release is available for download at:

http://www.aida64.com/downloads/aida64extremebuild2571jfzsxrb3qdzip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works

Feklar · August 14, 2013

Works great! I have the motherboard temp option back again. Under sensor temps there is also a measurement for PLX temp but this board does not have a PLX chip. Could this label be measuring some other temp on the board? Thanks for all your help Fiery.

Fiery · August 15, 2013

Works great! I have the motherboard temp option back again. Under sensor temps there is also a measurement for PLX temp but this board does not have a PLX chip. Could this label be measuring some other temp on the board? Thanks for all your help Fiery.

Thank you for the feedback. In case the "PLX" temperature reading looks valid (not stuck, not showing anything unreal), then it must be another temperature reading. Although we currently have no information on which temperature would it be.

Feklar · August 16, 2013

I am also not sure which temperature it is measuring. The temperature is not fixed and appears to vary between 29C at start up and 31C after a few minutes. It goes between 30-32C. In the bios for this motherboard are temperature measurements for VRM 1, VRM 2, and VRM 3 with those temps at 25C, 21C, and 20C respectively so the PLX label does not refer to any of those. I have never seen VRM temps in the bios for any other Asus boards until this new Maximus VI Formula but it's good to see those as well. Perhaps those can be incorporated in to the sensor column sometime in the future. I'm sure the mystery will be solved some time. Thanks for all your help Fiery.

Fiery · August 16, 2013

We'll rename PLX to a generic temperature label on your motherboard, and will also check if it's possible to read VRM temperatures.

tired_gamer · November 28, 2017

HI im having a problem with my motherboard recently and i am not able to solve it on my im sure its the same one with plx 1 its going over 70 degrees C and plx 2 and 3 or normal under 30 to 40 degrees and plx 1 is in red colour and 2 n 3 are in white so its plx1 1 that i know and its causing unexpected shutdown and its out of warrenty so its not going to get replaced i dont know what to do here this is what i have

asus maximus vi formula

16 gb corsair vengeance

intel i7 4770k

nzxt kraken x60

help me

Fiery · December 2, 2017

On ‎2017‎. ‎11‎. ‎28‎. at 10:42 PM, tired_gamer said:

HI im having a problem with my motherboard recently and i am not able to solve it on my im sure its the same one with plx 1 its going over 70 degrees C and plx 2 and 3 or normal under 30 to 40 degrees and plx 1 is in red colour and 2 n 3 are in white so its plx1 1 that i know and its causing unexpected shutdown and its out of warrenty so its not going to get replaced i dont know what to do here this is what i have

asus maximus vi formula

16 gb corsair vengeance

intel i7 4770k

nzxt kraken x60

help me

I'm afraid we have no specific idea on what to do about that. Try to ask the same question in a forum that's geared towards Asus ROG users and products, or specifically Maximus VI motherboards and their owners.

Sign In

Motherboard Temp for the Asus Maximus VI Formula

Recommended Posts

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Link to comment

Share on other sites

Join the conversation