BatJoe Posted March 25, 2015 Share Posted March 25, 2015 Hello, I just wanted to pass along to the developer(s) that there appears to be an issue with power and temp reporting accuracy in the latest stable AIDA64 Extreme and MSI's new X99S SLI KRAIT. Quote Link to comment Share on other sites More sharing options...
Fiery Posted March 25, 2015 Share Posted March 25, 2015 We would need a bit more information on that issue to fix it up What is the actual problem? Which values are reported incorrectly? Thanks, Fiery Quote Link to comment Share on other sites More sharing options...
BatJoe Posted March 25, 2015 Author Share Posted March 25, 2015 Hi Fiery, Thanks for your response. In the temp readouts for example there is nothing for the VRM listed and in the power section it does not list out many of the typical voltages you would see such as cache, input etc. I can only see the CPU voltage there. Also the railings are reporting negative values (-) for some reason. This is using the most recent 23.2 BIOS on the MSI site. Quote Link to comment Share on other sites More sharing options...
Fiery Posted March 25, 2015 Share Posted March 25, 2015 Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic. Also right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> SMBus Dump (Full). Copy-paste the full results into this topic. Quote Link to comment Share on other sites More sharing options...
BatJoe Posted March 25, 2015 Author Share Posted March 25, 2015 I was not able to do a full smbus as it would crash every time so I included a partial as well as the ISA. ISA-Sensor-Dump-MSI-X99-KRAIT.txt SMBUS-MSI-X99-KRAIT-PARTIAL.txt Quote Link to comment Share on other sites More sharing options...
Fiery Posted March 26, 2015 Share Posted March 26, 2015 Thank you, we'll fix the issue in the next AIDA64 beta update due to be rolled out in a few days from now. Quote Link to comment Share on other sites More sharing options...
BatJoe Posted March 26, 2015 Author Share Posted March 26, 2015 Great, looking forward to it! Quote Link to comment Share on other sites More sharing options...
BatJoe Posted April 1, 2015 Author Share Posted April 1, 2015 Any ETA on a fix? Quote Link to comment Share on other sites More sharing options...
Fiery Posted April 3, 2015 Share Posted April 3, 2015 Any ETA on a fix? It should already work with the latest beta http://www.aida64.com/downloads/latesta64xebeta Quote Link to comment Share on other sites More sharing options...
BatJoe Posted April 4, 2015 Author Share Posted April 4, 2015 Hi Fiery, It is definitely better, but for some reason I still cannot see VRM temp and some other voltages. And CPU vcore is not reading correctly. Quote Link to comment Share on other sites More sharing options...
Fiery Posted April 4, 2015 Share Posted April 4, 2015 Thank you for the feedback. I'm afraid we have no information on how to read VRM temperature on your motherboard, so we cannot implement that at this time As for the missing voltages, we can check them, but please let me know exactly which voltages are missing, and what are their current configured values (or what values does the UEFI Setup measure for those rails). Vcore is measured following MSI's spec that they provided for us. If it doesn't provide meaningful values, then ignore it and focus on the CPU VID reading instead. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.