25 replies to this topic

[stasio]

Hi Fiery,

just start today testing Z77X-D3H and Vdimm missing in AIDA64.

CPU Vcore AIDA64.........CPU Vtt
+12V AIDA64............13.03V
+12V ET6.................12.16V
+3.3V AIDA64...............1.64V
+3.3V ET6....................3.36V


Will check another reading later.
Report attached.

Best regards.

Attached Files

•  Z77X-D3H Report.zip   47.97K   3 downloads

[Fiery]

Please also attach or copy-paste an ISA Sensor Dump.


Thanks,
Fiery

[stasio]

Attached.

Attached Files

•  isasensordump.zip   1.35K   4 downloads

[Fiery]

Thank you. We'll fix that in the next AIDA64 beta release.

[stasio]

On Martin (HWiNFO) forum you can see our discussion.
Thanks.

Edit:
Also VTT voltage always show default 1.056V,
even I change in BIOS to 1.10-1.14V.

Edit 1:
Confirm today that VTT voltage more then default is BIOS bug.
So, AIDA64 and HWiNFO show correct value of 1.056V in sensors page.

[stasio]

Fiery,

about temperature , ET6 and BIOS reading PCH temp (62C).
Where is this in AIDA64? (AUX ,but reading is offset?)
Motherboard temperature also offset by 3C.

[Fiery]

IMHO "Aux" is the actual system temperature, "CPU" is labelled right. I'm not sure where PCH temperature comes from. If it's possible, please check if "Motherboard" in AIDA64 may be the actual PCH temperature with an offset.


Thanks,
Fiery

[stasio]

Fiery,

Martin agree (and Ray):

http://www.hwinfo.co...Z77X-D3H?page=2

Thanks,
Stasio

[Fiery]

Please upgrade to the latest beta version of AIDA64 Extreme Edition available at:

http://www.aida64.co...11np6gm0bjczzip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works

[stasio]

Hi Fiery,

South Brigde temp......OK
Vcore..........................OK
Vdimm.........................OK
VTT..............................Missing
+12V............................OK
+3.3V...........................OK

Thanks,
Stasio

[Fiery]

Thank you for the feedback! AFAIK VTT voltage cannot be measured on your motherboard. That's why it's missing from the BIOS Setup HW Monitor page and ET6 sensor page as well.

[stasio]

Fiery,

ET6 sensor page,never show VTT also in P45/P55/P67/Z68 series,but in AIDA64 (Everest) we have always this info.
Previous 1906 Beta (1900) show correct VTT,but not Vcore and Vdimm.
HWiNFO and SIV measured VTT correct.
Value is same as set in BIOS.

Thanks.

[Fiery]

Then please configure 2 different VTT levels in the BIOS Setup, and copy-paste the relevant AIDA64 ISA Sensor Dumps, indicating what VTT level is configured.


Thanks,
Fiery

[stasio]

OK,
will do soon.
Thanks

[stasio]

Fiery,

attached AIDA64 ISA Sensor Dumps.

VTT 1.03V
VTT 1.10V

Attached Files

•  isasensordump-VTT 1.03 V.zip   1.38K   1 downloads
•  isasensordump-VTT 1.10V.zip   1.38K   1 downloads

[Fiery]

Thank you. So VTT is actually measured by the sensor chip of your motherboard. Quite odd that neither the BIOS Setup or ET6 shows the measured voltage value.

Anyway, it will be implemented in the next AIDA64 beta release due next week

[stasio]

Thanks Fiery.

[Fiery]

Please find the latest AIDA64 beta release at:

http://www.aida64.co...13tqrs2v6chnzip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

[stasio]

Thanks Fiery,

VTT voltage OK.

Edit:
Fiery,

if possible to add IMC voltage for GB X79 and Z77 (if ITE support)?

[Fiery]

Thank you for the feedback. AFAIK IMC voltage is not measured on those motherboards.