Jump to content
AIDA64 Discussion Forum

Leaderboard


Popular Content

Showing content with the highest reputation since 09/15/18 in all areas

  1. 2 points
    There must be something wrong about the OpenCL software stack. Try to uninstall and reinstall ForceWare.
  2. 2 points
    New Text Version, uses on Desktop > text_v2.sensorpanel Adapted to 5 Inch Dispaly with 800x480 Pixels > PiDisplay.sensorpanel PiDisplay.sensorpanel text_v2.sensorpanel
  3. 1 point
    Can you export and share this? This is sweet and I think it would looks sweet on my Snowblind display
  4. 1 point
  5. 1 point
    What kind of tablet do you have? We've tested this with our Nexus 9 tablet, which reflects that a previous resolution of 1024 x 671 should be used in landscape mode. When we set it to that resolution, the LCD preview is in landscape mode (as it should be), and whatever we put on the LCD layout gets displayed properly on the screen. Almost the whole screen is filled, with only the top Android notification bar and the bottom Android virtual buttons bar make the usable area of the 9-inch screen a bit smaller.
  6. 1 point
    This is a case of using SSD1322 & FT232H https://forums.aida64.com/topic/4479-sale-er-oledm032-ssd1322-32-oled-usb-interface/
  7. 1 point
  8. 1 point
    Make sure to upgrade to the latest beta version of AIDA64 Engineer available at: https://www.aida64.com/downloads/latesta64eebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps.
  9. 1 point
    Try to go to AIDA64 installation folder, and find the settings file called AIDA64.INI. If you have the file there, try to edit it using Notepad, and replace the following lines: LowLevelRAIDEnum=1 LowLevelRAIDSMART=1 ... with the followings: LowLevelRAIDEnum=0 LowLevelRAIDSMART=0 If you don't have the file there yet, create it, and enter the following lines into the new text file: [Generic] LowLevelRAIDEnum=0 LowLevelRAIDSMART=0
  10. 1 point
    I was just asking because we've revamped the SMTP module to unlock support for Yandex and other mail services in AIDA64 v5.97. So you need that version or an even newer one to have proper SMTP support with SSL/STARTTLS.
  11. 1 point
    State #0 should display the state where the range is zero, so it shows for example 0 RPM or 0 degrees Celsius. State #15 should display the state where the range is at its maximum. So it shows like 5000 RPM (if your cooler can spin up to 5000 RPM) or 100 degrees Celsius (if you deem your thermal readings will never exceed that value). All the other states should show an intermediate step. Since State #0 = 0%, and State #15 = 100%, for example State #5 should show the range as if it was 33%.
  12. 1 point
    Thank you, we'll fix the issue in the next AIDA64 beta update. I'll post a message into this topic once the new build is available for download.
  13. 1 point
    Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first. Thanks, Fiery
  14. 1 point
    It is detected using various detection methods and built-in hardware databases. It's not possible to edit that string.
  15. 1 point
    Yes, and already added support for it in the latest AIDA64 beta update: https://www.aida64.com/downloads/latesta64xebeta You can activate the Rival 710 OLED module in AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD / SteelSeries. Let me know how it works.
  16. 1 point
    I am also having the same issue with AIDA 64 sensor panel not showing temps for the Radeon VII. I am on the current version stated above. From the debug it reads the temperatures and lines up with other programs but the option for the sensor does not appear in the sensor panel atigpureg.txt
  17. 1 point
    Thank you for the info. We'll remove the VRM temperature reading in the next AIDA64 beta update.
  18. 1 point
    First of all, make sure to upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. That should help about issue #1 and #2. If not, then please let me know where exactly are all your fans connected to (motherboard or water cooler/coolers), and whether the motherboard connected fans are "iffy" or the ones connected to your water cooler/coolers. As for #3, as you can see on the AIDA64 OSD Panel shots, there're quite a few thermal readings available for your CPU, namely "CPU", "CPU Package" and 4 core temperatures. iCUE could indicate any of those as CPU temperature, or it could simply show the liquid temperature of your water cooler as CPU temperature.
  19. 1 point
    Along with the Logitech Arx integration, we've also come up with a new LCD module that basically acts as a web server. You can use your main computer to run AIDA64 on it and maintain its built-in web server, and you can use your other computers or mobile devices to monitor your main computer's status remotely, using nothing but a web browser. You can activate it in AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD / RemoteSensor. Once you activated it, you can enter the IP address in virtually any web browsers to connect to the RemoteSensor. You can check the primary IP address of your computer on the Computer / Summary page in AIDA64. If it is e.g. 192.168.1.123, then enter the following in the address bar of your web browser: http://192.168.1.123 Or, in case you use a different TCP/IP port than the default http port of 80, then enter the address like this: http://192.168.1.123:8080 (if you use a TCP/IP port of 8080) Or, in case you try to use a web browser on the same computer where AIDA64 is running, you can simply use "localhost" instead of the IP address, like this: http://localhost Once you did that, you should see the AIDA64 splash screen in your web browser. It will provide you with information on the resolution that you need to use to get the most out of the LCD layout designer. On iOS devices the default setting should be close to the actual value to use, while on Android and other devices it may not match at all, so you need to change both the width and height. Please note that the Preview Resolution usually will not match the native screen resolution of your device. It's not a problem at all, and that discrepancy is due to the way web browsers manage the pixels of your screen, so don't be surprised that e.g. an iPhone 5 would report a Preview Resolution of 980 x 1360 pixels After the Preview Resolution is updated on the AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD page, you can use the same LCD layout designer that you would use for other LCD devices or the SensorPanel. Known issues and limitations: 1) Graphs and gauges are not implemented yet. We're planning to add them in the next few weeks. 2) RemoteSensor uses HTML5 SSE (Server-Sent Events) to refresh the web page, without having to reload it all the time. SSE is supported by almost all major web browsers, including Android Browser, BlackBerry 10 Browser, Chrome, FireFox, Opera, and Safari. However, it is sadly not yet supported by Internet Explorer. AIDA64 implements a trick to get around that limitation, but it sometimes will result in a mixup of the browser. If you notice that after changing the LCD layout in the AIDA64 Preferences, a strange log replaces the LCD layout in your browser, just refresh the web page. Hopefully Microsoft will finally implement SSE support in Internet Explorer 12 3) In order to prevent your mobile device from going to sleep while having the web browser open, you may need to install special apps on your mobile device. RemoteSensor has absolutely no control over the power management behavior of your mobile device. In case this is a deal breaker for you, and you've got a Logitech Gaming hardware, consider using Logitech Arx instead of the RemoteSensor. You can try the RemoteSensor in the following new AIDA64 beta update: http://www.aida64.com/downloads/latesta64xebeta Please let us know how it works on your mobile devices Thanks, Fiery
  20. 1 point
    That RGB fusion issue is fixed already, and the fix is inherited by the newer and newer beta updates, as well as the stable updates in the future.
  21. 1 point
    Please note that it's not possible to diagnose such issues remotely. You may want to take your phone to a local specialist and have it checked out.
  22. 1 point
    Special thanks to Novax as this entire Sensor Panel is a copy of his wonderful work. Thank you again for your creativity and generosity. HellKatDash02_08_2019.sensorpanel
  23. 1 point
    Hey, Would it possible to have a list like Task Manager does where the processes / applications that are using the CPU or network would come up. EDIT: On the LCD I mean. I ask for this as I find myself noting via AIDA64 on my LCD that the CPU might be at 20% and then I wonder what might be causing it so I open task manager to find out. It would be ideal if I could have a list like that on a different page on the LCD via AIDA64 so I could quickly check what was causing the spike. A similar idea for the network would be great like what's found in the "Processes with Network Activity" tab of the Resource Monitor. Many thanks.
  24. 1 point
    Hi, Aida64 now provides support for the Odospace Remote Panel app: Reuse your old android device to display sensor values of a Windows PC. A WiFi connection is not (!) required, Remote Panel works even when the device is connected to the PC via USB only. However, an SDK for Remote Panel is provided also. Sensor values are provided by the industry-leading system information tool Aida64 which must be purchased separately. Please note that Remote Panel is not affiliated with Aida64 or FinalWire in any way shape or form and no support can be provided by the Aida64 team for this app. Requirements - Aida64 version 5.20.3414 or heigher must be installed on the Windows PC. - Remote Panel (for Windows) version 1.16 must be installed and running, it can be downloaded with the following link http://apps.odospace.com/RemotePanelSetup.exe - Microsoft .Net framework 4.5 must be installed on the Windows PC. This will be done during the installation of Remote Panel (for Windows). - The android device vendor's drivers must be installed on the Windows PC. - USB debugging must be enabled on the android device. This is described in detail here. Enable Aiada64 plugIn - After installation of Remote Panel (for Windows) Aida64 must be restarted. - Within Aida64 open the preferences page, navigate to LCD and enable "Odospace". Add items within the LCD items page. Settings - A long press within the view opens the settings dialog. Troubleshooting - In general the settings dialog of Remote Panel (for Windows) can be opened from the popup menu of its tray icon. - Remote Panel (for Windows) uses port 38000 and 38001 for local communication, if you experience problems because another PC program is using one of this ports, change the port number within the Remote Panel (for Windows) settings dialog and within the Aida64 Odospace LCD plugin. - Remote Panel (for Windows) uses the Android Debug Bridge (adb.exe) for communication. If you experience problems with other Android synchronization programs, try to use another adb.exe file - it can be changed within the settings dialog of Remote Panel (for Windows). - On default, Remote Panel (for Windows) checks every 30 seconds for new devices, decrease this value within the settings for faster device recognition, increase this value for less CPU usage. Alternative usage - If an additional PC should send its sensor values to the android device, set the IP address within the Aida64 Odospace LCD plugin to the address of the PC where the android device is connected. For every PC specify a different panel position parameter. Remote Panel (for Windows) must be installed on every PC, however the Remote Panel (for Windows) executable must only be started on the PC where the Android device is connected. - Remote Panel can be used within a WiFi network also, in such case set the IP address within the Aida64 Odospace PlugIn to the device's address. The port must be set to 38000. The Remote Panel (for Windows) executable can be stopped in this case. Advanced topics - To automatically start Remote Panel you can use AutoStart. - To power off the device on PC shut down you can use AutomateIt Pro - use the USB disconnect trigger. - If the device battery discharge even connected via USB, try to set the CPU speed to a lower level. For example you can use Tickster MOD. - To power on the device on PC startup the device firmware must be modified (follow this AT YOUR OWN RISK, tested with Cyanogenmod 10.2 on LG P760/P880 and may not work with all devices): General 1. Download the device firmware - it can be the original or custom ROM. 2. Use Boot/Recovery Repacker to extract the boot.img file of the downloaded ROM. 3. Within the file init.rc, in the section beginning with "on charger" replace the string "class_start charger" with "trigger boot" or "trigger late-init". Ensure that your editor writes the file in UNIX format. 4. Use the repacker to compress the boot.img file. 5. Apply the new firmware. Nexus 7 (2012) 1. Boot in fastboot mode 2. Issue the following command within a command prompt: "fastboot oem off-mode-charge 0" Version 1.14 - Now sensor data of multiple PCs can be displayed on one android device - The android device can be connected to any PC (not only to the PC where Aida64 is running) - Requires Aida version 5.20.3414 or higher and Remote Panel (for Windows) version 1.14a Version 1.15 - Fullscreen mode (long press for settings) - RemotePanel (for windows) version 1.15: Verbose mode for better problem handling, fixes a rare ADB hang when multiple PCs are connected to one android device. Version 1.16 available - New option added: Keep screen on (long press for settings) Many thanks to the Aida64 team for the great support! Best regards odospace
  25. 1 point
    Yes. Upgrading to a new beta is as simple as that. You can let it overwrite any existing files. It will retain your existing settings (it won't overwrite or remove AIDA64.INI file) as well as your existing license.
  26. 1 point
    nuevo panel que estoy terminando este diseño no tiene nada que ver con los gauges les dejo unos gauges por si los quieren utilizar en el archivo rar. Gauge.7z
  27. 1 point
    Final built in red orange 4 ORANGE Red.splcd.axlcd
  28. 1 point
  29. 1 point
    Thank you! We've fixed the voltage readings in the latest AIDA64 beta build available at: https://www.aida64.com/downloads/latesta64xebeta
  30. 1 point
    I don't think your motherboard is capable of monitoring VRM temperature. We'll add the missing fan readings in the next AIDA64 beta update. I'll drop a message into this topic once the new AIDA64 beta is available for download.
  31. 1 point
    We've fixed the issue in the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps when your nVIDIA GPU is sleeping or went to sleep after a few minutes of inactivity.
  32. 1 point
    I think it's due to a difference between character-sets (character encoding) used on your PC and on your iPad/iPhone. We'll do some test runs and try to solve it by switching to UTF-8 or Unicode. I'll let you know in this topic once we have a fix for this issue.
  33. 1 point
  34. 1 point
    AIDA64 uses Asus WMI ACPI calls to measure sensor values on your motherboard. The incorrect readings are due to a BIOS bug.
  35. 1 point
    Your temperatures look normal.
  36. 1 point
    Thank you, but that dump doesn't include EC registers. Please enable status bar in AIDA64 / main menu / View, and on the status bar (which will appear on the bottom of the AIDA64 main window) do a right-click --> Sensor Debug --> Embedded Controller Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.
  37. 1 point
    Decided to try and work on one of these doodads... Really schocked, got it done in like 5 hours. CHEERS I built it basically looking at the work from the samples shown on here by a couple of users.
  38. 1 point
    Make sure to upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps.
  39. 1 point
  40. 1 point
    We've fixed the issue in the latest AIDA64 beta update: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps.
  41. 1 point
  42. 1 point
    Thank you for the dumps. I'm not sure what's happened, but we'll fix this issue in the next AIDA64 beta due in a few days from now. I'll post a message into this topic once the new beta build is available for download.
  43. 1 point
    Although I have made some detailed panels that looked ok to me I have come to realize that because I'm using a 5" LCD as my panel monitor I can't see the sensors because everything is just way too small so I decided to use only what I think would be helpful to my situation this round. Thank you StealthDefender for helping me realize this I would also like to thank Stupe9968 for the killer gauge templates . My new panel (I'm still kinda messin with it) So I just finished my new long awaited rig, specs are as of the following: PC Name - Jedi Assassin Motherboard - Gigabyte GA Z370 Aorus Gaming 7 CPU - Intel i7-8700k @ 5.0 MHz, 1.350 V CPU Cooler - NZXT Kraken X52 RAM - G-Skill Trident Z RGB 16G (2x8) DDR4-3000 MHz 16-18-18-38 CR2 SSD - Samsung M.2 960 EVO 500 MB (Temp) Portable HDD - Seagate Expansion 2 TB GPU - Gigabyte GeForce GTX 1060 Aorus Extreme Gaming 6GB Main Monitor - Viotek GN34C 34" curved 3440 x 1440 100Hz + O.C. Sensor Panel Monitor - 5" LCD attached to case PSU - EVGA SuperNova 850 G2 Gold Case - Phantek Enthoo Pro 2x NZXT 5x USB hub Speakers - Logitech Z623 200watt 2.1 THX Certified LG Blu-Ray DVD/Burner FANS 5x 120mm Thermaltake Riing plus RGB 2x 120mm NZXT 2x 140mm Corsair High Volume Purple LED
  44. 1 point
    Ok cool I'll see what I can come up with for ya we can fine tune it later on ...
  45. 1 point
    I think I'm getting the hang of this ... Here is a picture of my panel for my 800 x 480 LCD. Let me know what you think cus I made a few items. This is my second go at this and I'm waiting on some case fans right now so the side panel fan display is not hooked up yet below are samples of some medium gauges I made (for black background), if you like them email me for the files I don't mind sharing, I also make cool 800 x 480 backgrounds too 2 versions of a fan I'm working on right now.....
  46. 1 point
    Some new gauges. LOAD and IDILE. If some like it, leave coment and i sent you on you email. I have for LCD and sensor panel in ( Large and medium sizes ) in png
  47. 1 point
    This is a real layout GA-Z77X-UD5H. Panel size 1000x792 GA-Z77X-UD5H.2015-11-20.sensorpanel I have layered .psd file.
  48. 1 point
    So I noticed you've change the name of the product. No notification was given (so there was no free upgrade path due to no way of knowing about the "free conversion campaign") and I've still got over a year left on the license due to the campaign you ran last year. So much for that.... I can't say I'm very pleased however due to the above. Everest was a good product, but if the company starts pulling fast ones (as it seems to me) then I guess I'm better without. I guess I have to swallow my loss (upgrades to the product) and move on. -- Trust isn't easily gained, but it is easily lost.
  49. 0 points
    The documentation (https://open.uappexplorer.com/submit) on the OpenStore website clearly states that: Since our app would require a manual review (due to the special permissions it has to request), the last point applies to it. And since it's not open source, it cannot be submitted to manual review. So effectively, it cannot be published in the OpenStore.
  50. 0 points
    The Ubuntu Touch OS has been discontinued, and no new devices are rolling out to feature the last release. We will only resume further developing our Ubuntu Touch app in case the OS itself gets further developed and enhanced.
×
×
  • Create New...