Jump to content
AIDA64 Discussion Forum

Leaderboard


Popular Content

Showing content with the highest reputation since 10/07/10 in Posts

  1. 4 points
    Some new gauges. LOAD and IDILE. If some like it, leave coment and i sent you on you email. I have for LCD and sensor panel in ( Large and medium sizes ) in png
  2. 4 points
    Hi guys I'm new here on forum, so... My name's Pav, i'm from Navan (Ireland).Today i've created my first sensor panel MIDNIGHT(based little bit on sunj's work. Thanx man ). Hope you like it. preview: And on my desktop: MiIDNIGHT.sensorpanel
  3. 3 points
    Got a bit carried away with XCOM2 and hunting down a (possible) memory issue...
  4. 2 points
    Hi, Aida64 now provides support for the Odospace Remote Panel app: Reuse your old android device to display sensor values of a Windows PC. A WiFi connection is not (!) required, Remote Panel works even when the device is connected to the PC via USB only. However, an SDK for Remote Panel is provided also. Sensor values are provided by the industry-leading system information tool Aida64 which must be purchased separately. Please note that Remote Panel is not affiliated with Aida64 or FinalWire in any way shape or form and no support can be provided by the Aida64 team for this app. Requirements - Aida64 version 5.20.3414 or heigher must be installed on the Windows PC. - Remote Panel (for Windows) version 1.16 must be installed and running, it can be downloaded with the following link http://apps.odospace.com/RemotePanelSetup.exe - Microsoft .Net framework 4.5 must be installed on the Windows PC. This will be done during the installation of Remote Panel (for Windows). - The android device vendor's drivers must be installed on the Windows PC. - USB debugging must be enabled on the android device. This is described in detail here. Enable Aiada64 plugIn - After installation of Remote Panel (for Windows) Aida64 must be restarted. - Within Aida64 open the preferences page, navigate to LCD and enable "Odospace". Add items within the LCD items page. Settings - A long press within the view opens the settings dialog. Troubleshooting - In general the settings dialog of Remote Panel (for Windows) can be opened from the popup menu of its tray icon. - Remote Panel (for Windows) uses port 38000 and 38001 for local communication, if you experience problems because another PC program is using one of this ports, change the port number within the Remote Panel (for Windows) settings dialog and within the Aida64 Odospace LCD plugin. - Remote Panel (for Windows) uses the Android Debug Bridge (adb.exe) for communication. If you experience problems with other Android synchronization programs, try to use another adb.exe file - it can be changed within the settings dialog of Remote Panel (for Windows). - On default, Remote Panel (for Windows) checks every 30 seconds for new devices, decrease this value within the settings for faster device recognition, increase this value for less CPU usage. Alternative usage - If an additional PC should send its sensor values to the android device, set the IP address within the Aida64 Odospace LCD plugin to the address of the PC where the android device is connected. For every PC specify a different panel position parameter. Remote Panel (for Windows) must be installed on every PC, however the Remote Panel (for Windows) executable must only be started on the PC where the Android device is connected. - Remote Panel can be used within a WiFi network also, in such case set the IP address within the Aida64 Odospace PlugIn to the device's address. The port must be set to 38000. The Remote Panel (for Windows) executable can be stopped in this case. Advanced topics - To automatically start Remote Panel you can use AutoStart. - To power off the device on PC shut down you can use AutomateIt Pro - use the USB disconnect trigger. - If the device battery discharge even connected via USB, try to set the CPU speed to a lower level. For example you can use Tickster MOD. - To power on the device on PC startup the device firmware must be modified (follow this AT YOUR OWN RISK, tested with Cyanogenmod 10.2 on LG P760/P880 and may not work with all devices): General 1. Download the device firmware - it can be the original or custom ROM. 2. Use Boot/Recovery Repacker to extract the boot.img file of the downloaded ROM. 3. Within the file init.rc, in the section beginning with "on charger" replace the string "class_start charger" with "trigger boot" or "trigger late-init". Ensure that your editor writes the file in UNIX format. 4. Use the repacker to compress the boot.img file. 5. Apply the new firmware. Nexus 7 (2012) 1. Boot in fastboot mode 2. Issue the following command within a command prompt: "fastboot oem off-mode-charge 0" Version 1.14 - Now sensor data of multiple PCs can be displayed on one android device - The android device can be connected to any PC (not only to the PC where Aida64 is running) - Requires Aida version 5.20.3414 or higher and Remote Panel (for Windows) version 1.14a Version 1.15 - Fullscreen mode (long press for settings) - RemotePanel (for windows) version 1.15: Verbose mode for better problem handling, fixes a rare ADB hang when multiple PCs are connected to one android device. Version 1.16 available - New option added: Keep screen on (long press for settings) Many thanks to the Aida64 team for the great support! Best regards odospace
  5. 2 points
    New Text Version, uses on Desktop > text_v2.sensorpanel Adapted to 5 Inch Dispaly with 800x480 Pixels > PiDisplay.sensorpanel PiDisplay.sensorpanel text_v2.sensorpanel
  6. 2 points
    Ok cool I'll see what I can come up with for ya we can fine tune it later on ...
  7. 2 points
    This is a real layout GA-Z77X-UD5H. Panel size 1000x792 GA-Z77X-UD5H.2015-11-20.sensorpanel I have layered .psd file.
  8. 2 points
    This is the sample SensorPanel used in AIDA64 2.50 what's new page. This utilizes the new gauges and graphs. 250release_sample.sensorpanel
  9. 2 points
    THX, it's a great Feature ;-) My Actual LCARS / BW setting, 1024x600 to Display on a GalaxyTab 7" via iDisplay:
  10. 1 point
    I was just asking because we've revamped the SMTP module to unlock support for Yandex and other mail services in AIDA64 v5.97. So you need that version or an even newer one to have proper SMTP support with SSL/STARTTLS.
  11. 1 point
    It is detected using various detection methods and built-in hardware databases. It's not possible to edit that string.
  12. 1 point
    Please note that it's not possible to diagnose such issues remotely. You may want to take your phone to a local specialist and have it checked out.
  13. 1 point
    Your temperatures look normal.
  14. 1 point
  15. 1 point
    Actually, the AIDA64 app doesn't need to be unconfined (even if it has some special permission) so you can upload it to the OpenStore without requiring a manual review, so without the need to publish the source code (but if you changed idea and want to publish, it's welcome ) and choosing a proprietary license (as said by @mateo_salta) Thanks
  16. 1 point
    We believe we've found the root cause of the issues concerning Windows 10 April 2018 Update (Version 1803 / Build 17134) based systems. The timer that AIDA64 uses for BCLK measurement is also used by a new Win10 component. Most likely that component is used for GPU profiling. And when AIDA64 and Win10 both use the timer for their own purposes in the same time, the system could become unstable. We've had to disable polling for BCLK, so from now on AIDA64 will only measure BCLK once, and then use the last value until AIDA64 gets restarted. Here's the new AIDA64 beta build that includes the workaround: https://www.aida64.com/downloads/latesta64xebeta
  17. 1 point
    After several rewriting of this very complex module we've named SensorPanel, it has finally reached the stage that we can show it to the general public Please find the first SensorPanel beta in the following new beta release of AIDA64 Extreme Edition: http://www.aida64.com/downloads/aida64extremebuild1455u8nmy1wgcbzip [[[ link has been updated to the latest beta ]]] After upgrading to this new version, make sure to restart Windows to finalize the upgrade. You can enable the new feature in AIDA64 / main menu / File / Preferences / Hardware Monitoring / SensorPanel. You can set the update frequency for the SensorPanel in AIDA64 / main menu / File / Preferences / Hardware Monitoring / Update Frequency. --- A couple of limitations and important things to know about this first SensorPanel beta: 1) Most of the settings are moved out of the usual place (the central AIDA64 Preferences), so you can control most properties of the SensorPanel items straight from the SensorPanel itself. Just use the right-click context menu to modify, remove or move an item, or to close the SensorPanel. We'll add more options into the right-click menu soon. 2) You can only put BMP and PNG format images on the SensorPanel right now. We'll add JPEG support later on. In case you want to add a full background image to the SensorPanel, make sure to use BMP format, since it is the most efficient way to handle large images. 3) Currently there's only one bar style, a solid (classic) one. In case you've seen a bar design that you think would look cool in AIDA64, make sure to post a screen shot here in this topic. We'd like to extend the range of bar styles to allow fancier SensorPanel design, and also to make it easier to tell various sensor item bars apart from each other. 4) We'll implement sensor graphs in the near future too, probably before the summer. In case you have an idea about a visual sensor item representation that is not a simple label, not a bar, and not a graph, then post your idea in this topic, and we'll discuss it. 5) Currently there's no way to re-order the items to allow better overlaying and to allow placing an image behind a sensor item easier. Currently you need to add the images first, and then the sensor items, to make sure the sensor items are shown in front of the image(s). We'll add a "SensorPanel Manager" feature soon, to let you have a quick overview on all the items placed on the panel, and to re-order the items. BTW, it's possible to re-order items right now, if you close AIDA64, and edit AIDA64.INI file in a text editor. Not a very user-friendly way, but please keep in mind that this whole SensorPanel feature is only in the first beta stage right now 6) We have a lot of plans to make it easier to handle the panel items, and to generally make the SensorPanel user-friendly. For example: - Lock the size of the panel, so the user cannot accidently resize it. - Lock the position of the panel, so the user cannot accidently move it. - Temporarily hide one or more items on the panel, and also to unhide them. - Flashing the sensor item when the sensor value reaches the "Limit3" point. 7) Even though AIDA64 doesn't warn you about this, but it's important to understand that when you enable a bar, and you select its Place as "Embedded", then you need to set the bar's Indent property to a non-zero value to let the label text fit there. If you leave the "Indent" at zero, the label will be hidden under the bar. 8) FYI, even though the SensorPanel feature was developed as a replacement for both the OSD Panel and Sidebar Gadget feature, it will not effectively replace them. So if you prefer the easier layout of the old features, you can still use them. You can even use them together, if you want. If you have more ideas about how to make the SensorPanel feature more convenient, let us know here in this topic. Thanks, Fiery
  18. 1 point
    Thank you for the data. We'll add the 2 missing temperature readings in the next AIDA64 update that is rolling out tomorrow. As for the Adaptec issue, have you tried to enable Adaptec RAID support in AIDA64 / main menu / File / Preferences / Stability? Make sure to restart AIDA64 after altering that option.
  19. 1 point
    When that happened to me (the lcd is black or the sensor panel i only half to view....) it was my screen resolution for my main screen that wasn't set to the game specs.
  20. 1 point
    Go to AIDA64 / main menu / File / Preferences / Stability, and enable both the following options: Embedded Controller (EC) support Embedded Controller (EC) bank switching After altering those options, make sure to restart AIDA64 to apply the changes.
  21. 1 point
    I've sent you a private message about this issue.
  22. 1 point
    It's due to the difference in motherboard and CPU as well.
  23. 1 point
    It's not supported yet. We've just ordered a unit, and we'll implement support for the Commander Pro protocol as soon as it arrives. I'll let you know in this topic once a new AIDA64 beta -- with the protocol implemented -- becomes available for download. It shouldn't take more than 2 weeks approx.
  24. 1 point
    Please note that in order to detect the missing details, the camera ID information had to be previously encoded into the Android profile of the device. When the manufacturer of the devcie (in your case Sony) didn't encode the info there, then sysinfo apps cannot read or detect it.
  25. 1 point
    If the drive has a very smart controller that desperately tries to hide the fact that the capacity is less than the advertised value, then for a while the Random Write + Verify test may not report any issues. Especially when the performance is that freakishly low With such an underperforming drive you would have to let the Random Write + Verify test run for at least 2 days to draw any meaningful conclusion. Good old fraudulent pendrives which perform adequatly (like 20-30 MB/s) are usually caught by the test in a matter of minutes, sometimes few seconds only. But it's always best to let the Linear Write + Verify test to complete to 100%, since that's the only sure way of knowing that the drive can be filled 100% with data, and all data is fully retained (stored) by the drive.
  26. 1 point
    Here is mine, made to match some desktop gadgets I like to use. sensor.sensorpanel
  27. 1 point
    Thank you for the data. Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta Let me know if it helps
  28. 1 point
    this is my first try at this. haven't got around to labeling everything yet, but i made this one for my remote lcd panel. does anyone know if a lower update rate will impact system performance for remote lcd? as in like 500ms?
  29. 1 point
    Thank you! We don't have any presets available, but you can use some of the SensorPanel layouts other users posted to: https://forums.aida64.com/topic/667-share-your-sensorpanel/
  30. 1 point
    Go to: http://www.aida64.com/downloads Download AIDA64 Extreme, install it, run it, and go to main menu / Tools / System Stability Test. Uncheck all subtests except for FPU, and press the Start button. Watch the bottom graph, particularly the green graph that shows CPU throttling activity. Wait for at least an hour, and see if the green graph becomes red, indicating that your CPU throttles. No matter what various temperature readings show actually. If your CPU throttles under heavy load, then you have to do something about cooling to prevent that from happening
  31. 1 point
    Please don't mix PCH and PCH Diode temperatures. The first one comes from the onboard sensor chip, if it supports that readout. The latter comes from the PCH (chipset) itself, if it supports it. The latter doesn't need motherboard-specific support, so we cannot add it. Your PCH either supports the readout or not, and your BIOS either configures the PCH thermal controller properly or not.
  32. 1 point
    I don't think so. What could happen is a faster battery discharge when you keep AIDA64 running in the background to monitor your notebook. Monitoring hardware uses a few percentage of CPU load, and that causes higher overall system power draw than without it.
  33. 1 point
    The mentioned new AIDA64 beta update is available for download at: http://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works
  34. 1 point
    Hi, The Portuguese language needs improvement and it will be better with the AO 1990 that is more than in use now. Eg., Max. Visible Display Size=Tamanho de visão máximo -> Tamanho de visualização máximo Picture Aspect Ratio=Relação de aspecto da imagem -> Formato da imagem Viewing Angles=Ângulos de Visão -> Ângulos de Visualização Input Connectors=Conectores de Entrada -> Conetores de Entrada Embedded=Embutido ?!?!?!? -> Integrado or Incorporado ATA Device Features=Características do Dispositivo ATA -> Funionalidades do Dispositivo ATA Track-to-Track Seek=Busca pista por pista --- Busca?!?!?!??! Max. -> Máx. Por favor -> Por favor, etc... Regards, MS
  35. 1 point
    Hello With this forum, I can't copy/paste the text when I post a message. And I can't "add to post" file in a message How tio fix it ? Thanks
  36. 1 point
    The new release comes with support for a wider range of external LCD and VFD displays, including alphanumeric, monochrome and color panels, on which AIDA64 can directly display temperatures, voltages and fan speeds as well as other system information. The July update also introduces support for the latest and upcoming processor and graphics technologies and storage devices. New features & improvements - Support for new LCD and VFD devices: Abacom (ExpertProfi), AlphaCool, Digital Devices, LCD2USB, Mad Catz Venom, Matrix Orbital LK, Matrix Orbital GLK, Matrix Orbital GX, nMedia Pro-LCD, Pertelian X2040, SDC Megtron, SoundGraph iMon VFD, VL System LIS, VL System LIS 2 - Advanced support for monochrome LCDs - SMTP SSL support - Improved handling of XSL files - OpenGL ES 3.1 support - Revamped Direct3D Compute Shader devices enumeration - Plextor M6M, Plextor M6S, Samsung 845DC Evo, Samsung 850 Pro SSD support - GPU details for Mobile AMD Radeon R9 Series, FirePro W8100 - GPU details for nVIDIA GeForce GT 730, Quadro K2200M What's new since AIDA64 v4.00 - Microsoft Windows 8.1 Update 1 and Windows Server 2012 R2 Update 1 support - OpenCL GPGPU Benchmark Suite - AMD Mantle graphics accelerator diagnostics - Multi-threaded memory stress test with SSE, SSE2, AVX, AVX2, FMA, BMI and BMI2 acceleration - Optimized 64-bit benchmarks for AMD “Kaveri”, “Bald Eagle”, “Mullins”, “Beema” APUs - Optimized 64-bit benchmarks for Intel Atom C2000 “Avoton” and “Rangeley” SoC - Optimized 64-bit benchmarks for Intel “Bay Trail” desktop, mobile and tablet SoC - Full support for the Intel “Haswell Refresh” platform with Intel “Wildcat Point” PCH - Razer SwitchBlade LCD support - Improved support for Intel "Broadwell" CPU - Preliminary support for AMD "Carrizo” and "Toronto" APUs - Preliminary support for Intel Quark X1000 “Clanton” SoC - Preliminary support for Intel "Skylake", "Cherry Trail", "Denverton" CPUs - Improved support for Intel “Haswell-E” CPU and DDR4 memory modules - Support for DDR4 XMP 2.0 memory profiles - Intel H97 and Z97 chipset based motherboards support - Socket AM1 motherboards support - CUDA 6.0 support - Improved support for OpenCL 2.0 - Support for VirtualBox v4.3 and VMware Workstation v10 - A-Data SP920, Crucial M550, Intel 730, OCZ Vector 150, OCZ Vertex 460, Samsung XP941 SSD support - GPU details for AMD Radeon R5, R7, R9 Series - GPU details for nVIDIA GeForce 700 and 800 Series [ Press Release (English) ] [ Press Release (Deutsch) ] [ Press Release (italiano) ] [ Press Release (magyar) ] [ Press Release (Русский) ] [ Press Release (český) ] [ Press Release (polski) ] [ What's new in AIDA64 v4.60 ] [ Download ]
  37. 1 point
    Th well e manufacturer makes the choice at manner a the maximum rate of manner a instinctively
  38. 1 point
    Please upgrade to the latest beta version of AIDA64 Extreme available at: http://www.aida64.com/downloads/aida64extremebuild2622dmr7jqwpnyzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works. Thanks, Fiery
  39. 1 point
    For Italian users, we have a guide in Italian on how you can create a fully customized SensorPanel in AIDA64 Extreme Edition. (FYI: this is a pre-3.20 post so it does not cover area graphs and histograms, which have just been introduced, but these can be configured the same way as a line graph.) Come creare e personalizzare il SensorPanel di AIDA64? Hope it helps!
  40. 1 point
    You can try reinstalling Windows, updating drivers, updating BIOS, but I'm not sure if those would help at all in your case. It worth a try though.
  41. 1 point
    Thank you. I think the reason why we cannot find the sensor readings is that your motherboard has an IPMI BMC chip, and the sensor readings are only available via IPMI Sensor calls. Problem is: via direct IPMI KCS interface AIDA64 doesn't seem to be able to communicate with the BMC chip. Do you have an IPMI driver installed? If not, can you please try to install one? Maybe with the IPMI driver installed, you would be able to see the IPMI Sensor readings on the Computer / IPMI page.
  42. 1 point
    To make AIDA match the look of my Windows 8 box, I have spent some time designing a sensor panel. Here is the result (click here to download the sensorpanel config file).
  43. 1 point
    In such special case the lowest number of nodes (5) would be suitable. Extreme Engineer has no remote capabilities. Regards, Fiery
  44. 1 point
  45. 1 point
    Yes, that's our suspicion too. We already have a theory about where the Shared Memory feature piles up the handles, but it's not easy to reproduce and verify it. We'll work on it in the upcoming days, collect feedbacks from other beta testers as well, and hopefully we can fix it up soon.
  46. 1 point
    That's a neat layout
  47. 1 point
    Hey, I know this thread is somewhat old, but I was looking to start a thread where everyone posts their sensorpanel display; apparently this one was already here, so I figured I would just join the party. I have had Aida 64 for some time, and have been using the OSD. I somehow caught wind of the sensor panel just last night (I didn't know about it), and after a few hours this is what my display looks like (this is my left monitor). I'm quite happy with how it came out, and I thought I would share.
  48. 1 point
    Do you have a Logitech G13, G15 or G19 gaming device with a built-in LCD screen? If so, then do you have the necessary Logitech drivers installed? Regards, Fiery
  49. 1 point
    1) Here is the Sensorpage: Informationsliste Wert Sensor Eigenschaften Sensortyp Winbond W83627DHG (ISA 290h) GPU Sensortyp Analog Devices ADT7473 (NV-I2C 2Eh) Motherboard Name Asus P5E3 Deluxe / Premium Gehäusezutritt gefunden Nein Temperaturen Motherboard 35 °C (95 °F) CPU 35 °C (95 °F) 1. CPU / 1. Kern 25 °C (77 °F) 1. CPU / 2. Kern 29 °C (84 °F) 1. CPU / 3. Kern 17 °C (63 °F) 1. CPU / 4. Kern 20 °C (68 °F) GPU1: Grafikprozessor (GPU) 38 °C (100 °F) GPU1: GPU Diode 35 °C (95 °F) GPU1: GPU Speicher 32 °C (90 °F) GPU1: GPU Umgebung 31 °C (88 °F) GPU2: Grafikprozessor (GPU) 43 °C (109 °F) GPU2: GPU Speicher 35 °C (95 °F) GPU2: GPU Umgebung 36 °C (97 °F) WDC WD3200AAKS-00L9A0 (WD-WMAV29347229) 17 °C (63 °F) WDC WD3200AAKS-00L9A0 (WD-WMAV29379843) 17 °C (63 °F) WDC WD3200AAKS-61L9A0 (WD-WCAV2V784550) 17 °C (63 °F) WDC WD3200AAKS-61L9A0 (WD-WCAV2V784369) 17 °C (63 °F) Kühllüfter CPU 620 RPM Gehäuse #1 1918 RPM Gehäuse #2 2220 RPM GPU1 40% GPU2 1427 RPM (40%) Spannungswerte CPU Kern 1.35 V +3.3 V 3.31 V +5 V 4.97 V +12 V 11.87 V +5 V Bereitschaftsmodus 4.99 V GPU1: GPU Kern 0.96 V GPU1: GPU Vcc 3.32 V GPU1: GPU +12V 12.05 V GPU1: GPU VRM 0.95 V GPU2: GPU Kern 1.05 V GPU2: GPU Vcc 3.32 V Strom Werte CPU 54.87 A GPU1: GPU VRM 17.50 A Leistungswerte CPU 68.69 W GPU1: GPU VRM 16.50 W 2) I can confirm, that there are 2 GPUs in my System. A GTX 480 for Graphics and a GTX 285 for Physx. In the NVidia Driverpanel it is also set, that the 285 only does physx and nothing else. 3) There is one external Drive connected, but it is switched off, most of the time, because its just a Backupdrive. Hope that these Data would help. Greetings Dune
  50. 1 point
    Intel Rapid Storage RAID drivers cause that issue. Unlike Everest, AIDA64 implements a special call to acquire SMART disk health information (incl. disk temperature measurement) using a pass-through code via Intel RAID drivers. And that pass-through seems to cause slowdowns (freezes, lags) on certain configurations. We'll report the issue to Intel, and let's hope their next RAID driver release will fix that. To get lags less frequently than 20 seconds, you can try changing the option "Disk temperature polling frequency" (in AIDA64 / main menu / File / Preferences / Hardware Monitoring) to a higher value, e.g. 1800 seconds. You need the latest AIDA64 beta to have that option. Thanks, Fiery
×
×
  • Create New...