Jump to content
AIDA64 Discussion Forum

Leaderboard


Popular Content

Showing content with the highest reputation since 08/24/18 in all areas

  1. 2 points
    There must be something wrong about the OpenCL software stack. Try to uninstall and reinstall ForceWare.
  2. 2 points
    Thank you. Here's the fix for your motherboard as well as other motherboards that are affected by the same anomaly. https://www.aida64.com/downloads/latesta64xebeta
  3. 2 points
    New Text Version, uses on Desktop > text_v2.sensorpanel Adapted to 5 Inch Dispaly with 800x480 Pixels > PiDisplay.sensorpanel PiDisplay.sensorpanel text_v2.sensorpanel
  4. 2 points
    My Custom sensor panel, in the style of Asus' AI suite. It's 800 x 460 as this will be displayed on an in-case LCD-screen. The dials on top are dynamic, as well as the animated fan icons. I'm quite pleased with it. In case anyone's interested, I'll post a picture with the final result!
  5. 1 point
    This is a case of using SSD1322 & FT232H https://forums.aida64.com/topic/4479-sale-er-oledm032-ssd1322-32-oled-usb-interface/
  6. 1 point
    2019-07-28.sensorpanel
  7. 1 point
  8. 1 point
    Make sure to upgrade to the latest beta version of AIDA64 Engineer available at: https://www.aida64.com/downloads/latesta64eebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps.
  9. 1 point
    I'm glad you've managed to resolve it. In HWMonitor where can you see the WHEA error info? I've checked and I cannot find anything related to it there. Can you perhaps post a screenshot to show us what you're looking for?
  10. 1 point
    Try to go to AIDA64 installation folder, and find the settings file called AIDA64.INI. If you have the file there, try to edit it using Notepad, and replace the following lines: LowLevelRAIDEnum=1 LowLevelRAIDSMART=1 ... with the followings: LowLevelRAIDEnum=0 LowLevelRAIDSMART=0 If you don't have the file there yet, create it, and enter the following lines into the new text file: [Generic] LowLevelRAIDEnum=0 LowLevelRAIDSMART=0
  11. 1 point
    I was just asking because we've revamped the SMTP module to unlock support for Yandex and other mail services in AIDA64 v5.97. So you need that version or an even newer one to have proper SMTP support with SSL/STARTTLS.
  12. 1 point
    State #0 should display the state where the range is zero, so it shows for example 0 RPM or 0 degrees Celsius. State #15 should display the state where the range is at its maximum. So it shows like 5000 RPM (if your cooler can spin up to 5000 RPM) or 100 degrees Celsius (if you deem your thermal readings will never exceed that value). All the other states should show an intermediate step. Since State #0 = 0%, and State #15 = 100%, for example State #5 should show the range as if it was 33%.
  13. 1 point
    Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first. Thanks, Fiery
  14. 1 point
    It is detected using various detection methods and built-in hardware databases. It's not possible to edit that string.
  15. 1 point
    Thank you! Please upgrade to the latest AIDA64 beta update: https://www.aida64.com/downloads/latesta64xebeta Let me know how it works.
  16. 1 point
    Thanks for the feedback. The new items should be available for the SensorPanel automatically -- but they're not added to the SensorPanel layout automatically. You need to right-click on your SensorPanel --> New, and pick the item you're looking for.
  17. 1 point
    Yes, and already added support for it in the latest AIDA64 beta update: https://www.aida64.com/downloads/latesta64xebeta You can activate the Rival 710 OLED module in AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD / SteelSeries. Let me know how it works.
  18. 1 point
    Thank you. We've improved on Radeon VII support in the latest AIDA64 beta build: https://www.aida64.com/downloads/latesta64xebeta On the Display / GPU page the new update should measure GPU clock and memory clock properly now, and should display a whole bunch of sensor readings on the Computer / Sensor page as well. Please let us know how it works on your Radeon VII cards.
  19. 1 point
    I am also having the same issue with AIDA 64 sensor panel not showing temps for the Radeon VII. I am on the current version stated above. From the debug it reads the temperatures and lines up with other programs but the option for the sensor does not appear in the sensor panel atigpureg.txt
  20. 1 point
  21. 1 point
    First of all, make sure to upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. That should help about issue #1 and #2. If not, then please let me know where exactly are all your fans connected to (motherboard or water cooler/coolers), and whether the motherboard connected fans are "iffy" or the ones connected to your water cooler/coolers. As for #3, as you can see on the AIDA64 OSD Panel shots, there're quite a few thermal readings available for your CPU, namely "CPU", "CPU Package" and 4 core temperatures. iCUE could indicate any of those as CPU temperature, or it could simply show the liquid temperature of your water cooler as CPU temperature.
  22. 1 point
    I'm not sure how to talk to that mouse, but we've ordered one and we'll try to figure it out I'll let you know in this topic once we have a new AIDA64 beta build for you to check out.
  23. 1 point
    Along with the Logitech Arx integration, we've also come up with a new LCD module that basically acts as a web server. You can use your main computer to run AIDA64 on it and maintain its built-in web server, and you can use your other computers or mobile devices to monitor your main computer's status remotely, using nothing but a web browser. You can activate it in AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD / RemoteSensor. Once you activated it, you can enter the IP address in virtually any web browsers to connect to the RemoteSensor. You can check the primary IP address of your computer on the Computer / Summary page in AIDA64. If it is e.g. 192.168.1.123, then enter the following in the address bar of your web browser: http://192.168.1.123 Or, in case you use a different TCP/IP port than the default http port of 80, then enter the address like this: http://192.168.1.123:8080 (if you use a TCP/IP port of 8080) Or, in case you try to use a web browser on the same computer where AIDA64 is running, you can simply use "localhost" instead of the IP address, like this: http://localhost Once you did that, you should see the AIDA64 splash screen in your web browser. It will provide you with information on the resolution that you need to use to get the most out of the LCD layout designer. On iOS devices the default setting should be close to the actual value to use, while on Android and other devices it may not match at all, so you need to change both the width and height. Please note that the Preview Resolution usually will not match the native screen resolution of your device. It's not a problem at all, and that discrepancy is due to the way web browsers manage the pixels of your screen, so don't be surprised that e.g. an iPhone 5 would report a Preview Resolution of 980 x 1360 pixels After the Preview Resolution is updated on the AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD page, you can use the same LCD layout designer that you would use for other LCD devices or the SensorPanel. Known issues and limitations: 1) Graphs and gauges are not implemented yet. We're planning to add them in the next few weeks. 2) RemoteSensor uses HTML5 SSE (Server-Sent Events) to refresh the web page, without having to reload it all the time. SSE is supported by almost all major web browsers, including Android Browser, BlackBerry 10 Browser, Chrome, FireFox, Opera, and Safari. However, it is sadly not yet supported by Internet Explorer. AIDA64 implements a trick to get around that limitation, but it sometimes will result in a mixup of the browser. If you notice that after changing the LCD layout in the AIDA64 Preferences, a strange log replaces the LCD layout in your browser, just refresh the web page. Hopefully Microsoft will finally implement SSE support in Internet Explorer 12 3) In order to prevent your mobile device from going to sleep while having the web browser open, you may need to install special apps on your mobile device. RemoteSensor has absolutely no control over the power management behavior of your mobile device. In case this is a deal breaker for you, and you've got a Logitech Gaming hardware, consider using Logitech Arx instead of the RemoteSensor. You can try the RemoteSensor in the following new AIDA64 beta update: http://www.aida64.com/downloads/latesta64xebeta Please let us know how it works on your mobile devices Thanks, Fiery
  24. 1 point
    That RGB fusion issue is fixed already, and the fix is inherited by the newer and newer beta updates, as well as the stable updates in the future.
  25. 1 point
    Please note that it's not possible to diagnose such issues remotely. You may want to take your phone to a local specialist and have it checked out.
  26. 1 point
    Special thanks to Novax as this entire Sensor Panel is a copy of his wonderful work. Thank you again for your creativity and generosity. HellKatDash02_08_2019.sensorpanel
  27. 1 point
    Hey, Would it possible to have a list like Task Manager does where the processes / applications that are using the CPU or network would come up. EDIT: On the LCD I mean. I ask for this as I find myself noting via AIDA64 on my LCD that the CPU might be at 20% and then I wonder what might be causing it so I open task manager to find out. It would be ideal if I could have a list like that on a different page on the LCD via AIDA64 so I could quickly check what was causing the spike. A similar idea for the network would be great like what's found in the "Processes with Network Activity" tab of the Resource Monitor. Many thanks.
  28. 1 point
    Bars can be rotated by specifying a width that is smaller than the height
  29. 1 point
    Final built in red orange 4 ORANGE Red.splcd.axlcd
  30. 1 point
    same panel but black, white and red for samsung spf 800x480 BlackWhite 2019-01-20.splcd.axlcd
  31. 1 point
    Thank you! We've fixed the voltage readings in the latest AIDA64 beta build available at: https://www.aida64.com/downloads/latesta64xebeta
  32. 1 point
  33. 1 point
    aquí la descarga espero les guste dejo imagen i el PSD
  34. 1 point
  35. 1 point
    I'd make sure to have the system running at stock settings (no overclock). If it still doesn't work, then try to borrow a PSU from a friend and check if it is the culprit or not. If that still doesn't solve it, try to borrow a set of RAM modules. If it still doesn't solve it, then it could well be the motherboard, which is the most difficult part to replace.
  36. 1 point
    We've fixed the issue in the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps when your nVIDIA GPU is sleeping or went to sleep after a few minutes of inactivity.
  37. 1 point
  38. 1 point
    Hi, UBports https://ubports.com/ is maintaining and developing the Ubuntu touch os, and there is a strong community starting around it, a lot of developers and porters interested in system info have asked about the availability of your program after Canonicals app store has shut down. The new app store is here: https://open.uappexplorer.com/ If possible could you make the click package available to the open store, or even here on the forum?
  39. 1 point
    Decided to try and work on one of these doodads... Really schocked, got it done in like 5 hours. CHEERS I built it basically looking at the work from the samples shown on here by a couple of users.
  40. 1 point
    I don't know much about the LED. You may want to ask around in MSI motherboard related forums about that. I would make sure to have the latest BIOS and latest Windows 10 updates installed, and use the system with factory settings. With those settings everything should work fine. Don't worry about the temperatures as long as the system is running fine and never slows down due to overheating.
  41. 1 point
  42. 1 point
    Hello! My project does not stand still and there is a continuation!
  43. 1 point
    We've fixed the issue in the latest AIDA64 beta update: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps.
  44. 1 point
    Some of the security patches are for SMT/HyperThreading enabled systems And yes, in several cases certain workloads do indeed work best without SMT/HTT.
  45. 1 point
  46. 1 point
    HWiNFO and HWMonitor might fit the bill.
  47. 1 point
    Hello Here is my panel of ROG control for my second screen 1920x1080. I realized with photoshop at 80% There are some changes to make. Image 1 is without photoshop Image 2 with photoshop Sorry for my english I am french.
  48. 1 point
    I would like to know how to turn on a second unique Sensor Panel. I figure it must be possible as @Fiery said in 2013... "We do have plans about multiple SensorPanels,"
  49. 1 point
    So I noticed you've change the name of the product. No notification was given (so there was no free upgrade path due to no way of knowing about the "free conversion campaign") and I've still got over a year left on the license due to the campaign you ran last year. So much for that.... I can't say I'm very pleased however due to the above. Everest was a good product, but if the company starts pulling fast ones (as it seems to me) then I guess I'm better without. I guess I have to swallow my loss (upgrades to the product) and move on. -- Trust isn't easily gained, but it is easily lost.
  50. 1 point
    After buying a new comp i was started with modding. More info - http://nl.hardware.i...irus_59-edition SilverStone Fortress FT03 Black + MIMO 720F Touchscreen USB Monitor (7" 800x480) He was supposed to be better than the old one. Lian Li PC-A05NBF Black + Alphacool LC-Display 240x128 I was looking for software to use the built-in monitor as my old Alphacool LC-Display. And I found AIDA64. The first attempt / v1 The second attempt / v2 - v2.sensorpanel The third attempt / v3. I use now v3 BW 128 v2 - v3.sensorpanel - v3 BW.sensorpanel - v3 BW 128.sensorpanel - v3 BW 128 v2.sensorpanel Possible future - v4.sensorpanel I can't upload anymore, the limit is reached Now I'm waiting for the appearance of the possibility to monitor hard drives and wireless signal strength.
×
×
  • Create New...