Jump to content
AIDA64 Discussion Forum

Leaderboard


Popular Content

Showing content with the highest reputation since 01/22/19 in all areas

  1. 2 points
    ROG Edition I uploaded the font i used as well pirulen rg.ttf 2019-10-08-Final.sensorpanel
  2. 2 points
  3. 2 points
    Decided to try and work on one of these doodads... Really schocked, got it done in like 5 hours. CHEERS I built it basically looking at the work from the samples shown on here by a couple of users.
  4. 2 points
  5. 1 point
    For clarity, there is a screenshot of my situation at the bottom. I. e. 2 monitors are connected to the computer, absolutely identical-but except for the serial number and release date, and when uploading the report to the database-I can't process this information so that I understand that in the report there are 2 monitors, if they differ in name, then it would still be possible to group them, but not in this case. And this is where it would help a lot to have an additional field Sequel by which I would be able to group, and understand that there are 2 or more pieces. Similar situations are suitable for many other types of information where there are many similar devices
  6. 1 point
    Thank you, we'll check it out.
  7. 1 point
    Hi! Last year, I was looking for a display to show different information on my home theather computer. I wanted a display to fit in a 5" 1/4 bay and no LCD technology as I don't want backlight that lights all my room when I watch a movie (high contrast required). Then I discovered the 3.2" monochrome OLED display ER-OLEDM032 based on SSD1322 chip. Support in Aida64 was implemented by Fiery. It looks great! Infinite contrast of OLED technology is perfect. 4 different models exist for 4 different colours. Blue: Green: White (what I chose): And yellow: Dimensions: 4 protocols are available. Protocol to be used is set using bridges on the display PCB. 6800 8-bit parallel 8080 8-bit parallel 3 wires SPI 4 wires SPI 6800 and 8080 are obsolete as we don't use anymore parallel port. I chose 4 wires SPI rather than 3 wires SPI because communication speed is a bit higher. To convert USB to 4 wires SPI, I used a FTDI UM232H-B-WE breakout module based on chip FT232H. Here is the schematic of connections between USB breakout module and OLED display:
  8. 1 point
    That was quite harsh. This forum is dedicated to providing support for our software (AIDA64), and not as a generic technical help/support forum for various hardware or software related issues. Even so, I've replied you and started a conversation. Anyway, I'm glad you've managed to solve your issue. This topic is locked.
  9. 1 point
    We'll remove the bogus CPU thermal reading in the next AIDA64 beta update.
  10. 1 point
    Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works.
  11. 1 point
    Done a sensor panel with lot's of room for more gauges.I use them for PC gaming. Dragon Nights Gauges.7z Dragon Nights.sensorpanel
  12. 1 point
    Did some re-arranging: Would it be possible to add a feature where we could highlight certain sensors (gauges) and have them change color? For example; I want to keep an eye on CPU voltage and water temperatures. I would be able to select those gauges and the gauge background would turn red with yellow numbers and blue 'ticks'?
  13. 1 point
    HI, just got Aida64 Extreme for my new PC coz my 3900X was running hot and the Wraith cooler was spinning up & down frequently at idle with no load so I wanted to stress test and monitor the system stats. I found the SensorPanel very useful but the customisation is not very intuitive so I took one from this Reddit post, and downloaded the sonsorpanel file from the poster's link but mine doesn't look like his SensorPanel, looks like scaling/sizing issue. I did a clean Windows install and installed Aida64 Extreme again and imported from the link again but same issue, the gauges & bars have shrunk and I couldn't find any settings to resize them. 2019-08-09 fixed.sensorpanel
  14. 1 point
    If you have no RAID arrays defined, you can try disabling the two RAID related options in AIDA64 / main menu / File / Preferences / Stability. It accelerates AIDA64 startup and you can also avoid BSoD in certain circumstances.
  15. 1 point
    On Asus AM4 systems it's safer with the Asus WMI sensor support enabled. Without it concurrent access by AIDA64 and the motherboard BIOS can cause collisions that may just end up in fan duty cycles messing up. Please note that even though the new Asus WMI ACPI interface was invented and designed to avoid those collisions that plagued the Asus AM4 platform since the very beginning, the interface is poorly implemented in multiple Asus motherboards. It is also not implemented all across the board. So while it's a great thing in theory, in practice it causes a lot of headaches. All you can do is put more pressure on Asus to fix this issue in a future BIOS update.
  16. 1 point
    Hello, Sorry for the delay been real busy ... so in the end result I ended up making the background transparent so they would be universal plus the blades spin ....and I took the branding off cause I don't support Thermaltake anymore..(Cause they won't support me).BTW anyone looking to buy 120mm TT riing plus fan kit ??? 5 x fans (3 are about 1 year old and 2 are new with only 100 hours use) bran new riing trio controller and all the wiring... $100 ....I can't get the software to work properly anymore due to another program I'm running (DAW) and I need the other program... BTW Nik, If you have any questions about sensor panels I have a bunch of stuff I made and modded over the past few years so I may have something you are looking for and I would be glad to lend a hand....Also those pics you "quoted" are from like 2 years ago ... lol transparent black fan - gauge 70 x 70.zip
  17. 1 point
    Thank you! It seems the HID protocol we use for Z10 cannot be used for Z10 RGB, since the protocol itself seems to have changed. We've contacted EVGA and asked them to provide us with he necessary technical information to implement support for the new Z10 RGB HID protocol and so let us put our own bitmaps on the LCD of Z10 RGB. I'll let you know once we could accomplish all of that.
  18. 1 point
    Can you export and share this? This is sweet and I think it would looks sweet on my Snowblind display
  19. 1 point
    What kind of tablet do you have? We've tested this with our Nexus 9 tablet, which reflects that a previous resolution of 1024 x 671 should be used in landscape mode. When we set it to that resolution, the LCD preview is in landscape mode (as it should be), and whatever we put on the LCD layout gets displayed properly on the screen. Almost the whole screen is filled, with only the top Android notification bar and the bottom Android virtual buttons bar make the usable area of the 9-inch screen a bit smaller.
  20. 1 point
    This is a case of using SSD1322 & FT232H https://forums.aida64.com/topic/4479-sale-er-oledm032-ssd1322-32-oled-usb-interface/
  21. 1 point
  22. 1 point
    Make sure to upgrade to the latest beta version of AIDA64 Engineer available at: https://www.aida64.com/downloads/latesta64eebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps.
  23. 1 point
    Try to go to AIDA64 installation folder, and find the settings file called AIDA64.INI. If you have the file there, try to edit it using Notepad, and replace the following lines: LowLevelRAIDEnum=1 LowLevelRAIDSMART=1 ... with the followings: LowLevelRAIDEnum=0 LowLevelRAIDSMART=0 If you don't have the file there yet, create it, and enter the following lines into the new text file: [Generic] LowLevelRAIDEnum=0 LowLevelRAIDSMART=0
  24. 1 point
    I was just asking because we've revamped the SMTP module to unlock support for Yandex and other mail services in AIDA64 v5.97. So you need that version or an even newer one to have proper SMTP support with SSL/STARTTLS.
  25. 1 point
    State #0 should display the state where the range is zero, so it shows for example 0 RPM or 0 degrees Celsius. State #15 should display the state where the range is at its maximum. So it shows like 5000 RPM (if your cooler can spin up to 5000 RPM) or 100 degrees Celsius (if you deem your thermal readings will never exceed that value). All the other states should show an intermediate step. Since State #0 = 0%, and State #15 = 100%, for example State #5 should show the range as if it was 33%.
  26. 1 point
    Thank you, we'll fix the issue in the next AIDA64 beta update. I'll post a message into this topic once the new build is available for download.
  27. 1 point
    Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first. Thanks, Fiery
  28. 1 point
    It is detected using various detection methods and built-in hardware databases. It's not possible to edit that string.
  29. 1 point
    Thanks for the feedback. The new items should be available for the SensorPanel automatically -- but they're not added to the SensorPanel layout automatically. You need to right-click on your SensorPanel --> New, and pick the item you're looking for.
  30. 1 point
    Yes, and already added support for it in the latest AIDA64 beta update: https://www.aida64.com/downloads/latesta64xebeta You can activate the Rival 710 OLED module in AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD / SteelSeries. Let me know how it works.
  31. 1 point
    Thank you. We've improved on Radeon VII support in the latest AIDA64 beta build: https://www.aida64.com/downloads/latesta64xebeta On the Display / GPU page the new update should measure GPU clock and memory clock properly now, and should display a whole bunch of sensor readings on the Computer / Sensor page as well. Please let us know how it works on your Radeon VII cards.
  32. 1 point
    I am also having the same issue with AIDA 64 sensor panel not showing temps for the Radeon VII. I am on the current version stated above. From the debug it reads the temperatures and lines up with other programs but the option for the sensor does not appear in the sensor panel atigpureg.txt
  33. 1 point
    Thank you for the info. We'll remove the VRM temperature reading in the next AIDA64 beta update.
  34. 1 point
    First of all, make sure to upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. That should help about issue #1 and #2. If not, then please let me know where exactly are all your fans connected to (motherboard or water cooler/coolers), and whether the motherboard connected fans are "iffy" or the ones connected to your water cooler/coolers. As for #3, as you can see on the AIDA64 OSD Panel shots, there're quite a few thermal readings available for your CPU, namely "CPU", "CPU Package" and 4 core temperatures. iCUE could indicate any of those as CPU temperature, or it could simply show the liquid temperature of your water cooler as CPU temperature.
  35. 1 point
    That RGB fusion issue is fixed already, and the fix is inherited by the newer and newer beta updates, as well as the stable updates in the future.
  36. 1 point
    Please note that it's not possible to diagnose such issues remotely. You may want to take your phone to a local specialist and have it checked out.
  37. 1 point
    Special thanks to Novax as this entire Sensor Panel is a copy of his wonderful work. Thank you again for your creativity and generosity. HellKatDash02_08_2019.sensorpanel
  38. 1 point
    Yes. Upgrading to a new beta is as simple as that. You can let it overwrite any existing files. It will retain your existing settings (it won't overwrite or remove AIDA64.INI file) as well as your existing license.
  39. 1 point
    Thank to Novax for sharing gauges 3 BLUE Red.splcd.axlcd
  40. 1 point
    I have reworked everything a bit. The left side i am happy with at this moment. Right side i have to go another time. With top i am not sure what i will make, the gauges can still be in place but i don`t know what i do with fraps and processes. Icons for components are all interaktiv. Many thanx to @xtcislove who shared his panel, (which is also really great) and .psd files. I have used some of them and changed the orange to green, so it will fit better my needs! What do you think? is it to overload, i have missed something important? So i hope you like it, if its ready in my opinion i will share it to the forum in any way! Greetz Stealth
  41. 1 point
    Ok cool I'll see what I can come up with for ya we can fine tune it later on ...
  42. 1 point
  43. 1 point
    Bonjour à tous, Voici mon SensorPanel dont je suis fier d'avoir créé!
  44. 1 point
    It's a shame that Sensor Panel is absurdly underused because the U.I to configure and customize it so unfriendly. Anyway, I find that having too much information on the panel just distract's me from what I really need to pay attention to when gaming, so here is my simple flat design panel inspired on the colors from material design (which also match the wallpaper behind it) flep_material-flat.sensorpanel
  45. 1 point
    Got a bit carried away with XCOM2 and hunting down a (possible) memory issue...
  46. 1 point
    Here is mine, made to match some desktop gadgets I like to use. sensor.sensorpanel
  47. 1 point
    Great :-) Can I get a set of these, please.
  48. 1 point
    Greetings to all First of all this is not my work at all, it belong's to @Stupe9968 there is great works here but i think this is the best i ever saw it. when Stupe9968 post it here i send him a PM to share hi's great work but only after 2 years he reply me back and shared to me So i will share hi's work to you guys aswell hi's worked images file is to big for upload https://drive.google.com/file/d/0Bx2ic5sIfLxCQm1mV3B2TWNRcjg/view?usp=sharing
  49. 1 point
    1) Do you have 2 or 4 processor sockets populated? 2) Do all processors have DDR3-1333 memory installed? So every processors use the same memory configuration? In case you have 4 processor sockets populated, and every processors use the same DDR3-1333 memory configuration, that would mean you've got 16 memory channels total, each running at DDR3-1333 speed, which would mean a total memory bandwidth of 166.6 GBytes/sec. Hence the results could well be accurate The confusion may come from the fact that AIDA64 (the main application itself) only supports up to 32 processor threads, so it cannot show you all processors on the Cache & Memory Benchmark Panel. However, the multi-threaded memory benchmarks support up to 64 processor threads, so it can utilize all 48 processing threads you've got in your system (if you have all 4 processor sockets populated, each with a 12-core Magny-Cours CPU). Regards, Fiery
  50. 0 points
    We've checked, and MQTT is quite a complicated protocol to implement from scratch. If there's a considerable demand for such a feature, then I believe it would be best if someone came up with a library that picks up AIDA64 External Applications readings from Shared Memory, Windows Registry or WMI, and send the stuff over MQTT using its own libraries and implementation.
×
×
  • Create New...