Jump to content
AIDA64 Discussion Forum

Leaderboard


Popular Content

Showing content with the highest reputation since 04/29/13 in all areas

  1. 4 points
    Some new gauges. LOAD and IDILE. If some like it, leave coment and i sent you on you email. I have for LCD and sensor panel in ( Large and medium sizes ) in png
  2. 4 points
    Hi guys I'm new here on forum, so... My name's Pav, i'm from Navan (Ireland).Today i've created my first sensor panel MIDNIGHT(based little bit on sunj's work. Thanx man ). Hope you like it. preview: And on my desktop: MiIDNIGHT.sensorpanel
  3. 3 points
    Got a bit carried away with XCOM2 and hunting down a (possible) memory issue...
  4. 2 points
    New Text Version, uses on Desktop > text_v2.sensorpanel Adapted to 5 Inch Dispaly with 800x480 Pixels > PiDisplay.sensorpanel PiDisplay.sensorpanel text_v2.sensorpanel
  5. 2 points
    Ok cool I'll see what I can come up with for ya we can fine tune it later on ...
  6. 2 points
    This is a real layout GA-Z77X-UD5H. Panel size 1000x792 GA-Z77X-UD5H.2015-11-20.sensorpanel I have layered .psd file.
  7. 1 point
    Hi! Last year, I was looking for a display to show different information on my home theather computer. I wanted a display to fit in a 5" 1/4 bay and no LCD technology as I don't want backlight that lights all my room when I watch a movie (high contrast required). Then I discovered the 3.2" monochrome OLED display ER-OLEDM032 based on SSD1322 chip. Support in Aida64 was implemented by Fiery. It looks great! Infinite contrast of OLED technology is perfect. 4 different models exist for 4 different colours. Blue: Green: White (what I chose): And yellow: Dimensions: 4 protocols are available. Protocol to be used is set using bridges on the display PCB. 6800 8-bit parallel 8080 8-bit parallel 3 wires SPI 4 wires SPI 6800 and 8080 are obsolete as we don't use anymore parallel port. I chose 4 wires SPI rather than 3 wires SPI because communication speed is a bit higher. To convert USB to 4 wires SPI, I used a FTDI UM232H-B-WE breakout module based on chip FT232H. Here is the schematic of connections between USB breakout module and OLED display:
  8. 1 point
    On Asus AM4 systems it's safer with the Asus WMI sensor support enabled. Without it concurrent access by AIDA64 and the motherboard BIOS can cause collisions that may just end up in fan duty cycles messing up. Please note that even though the new Asus WMI ACPI interface was invented and designed to avoid those collisions that plagued the Asus AM4 platform since the very beginning, the interface is poorly implemented in multiple Asus motherboards. It is also not implemented all across the board. So while it's a great thing in theory, in practice it causes a lot of headaches. All you can do is put more pressure on Asus to fix this issue in a future BIOS update.
  9. 1 point
    I was just asking because we've revamped the SMTP module to unlock support for Yandex and other mail services in AIDA64 v5.97. So you need that version or an even newer one to have proper SMTP support with SSL/STARTTLS.
  10. 1 point
    It is detected using various detection methods and built-in hardware databases. It's not possible to edit that string.
  11. 1 point
    Thank you for the info. We'll remove the VRM temperature reading in the next AIDA64 beta update.
  12. 1 point
    Please note that it's not possible to diagnose such issues remotely. You may want to take your phone to a local specialist and have it checked out.
  13. 1 point
    Your temperatures look normal.
  14. 1 point
  15. 1 point
    Actually, the AIDA64 app doesn't need to be unconfined (even if it has some special permission) so you can upload it to the OpenStore without requiring a manual review, so without the need to publish the source code (but if you changed idea and want to publish, it's welcome ) and choosing a proprietary license (as said by @mateo_salta) Thanks
  16. 1 point
    After several rewriting of this very complex module we've named SensorPanel, it has finally reached the stage that we can show it to the general public Please find the first SensorPanel beta in the following new beta release of AIDA64 Extreme Edition: http://www.aida64.com/downloads/aida64extremebuild1455u8nmy1wgcbzip [[[ link has been updated to the latest beta ]]] After upgrading to this new version, make sure to restart Windows to finalize the upgrade. You can enable the new feature in AIDA64 / main menu / File / Preferences / Hardware Monitoring / SensorPanel. You can set the update frequency for the SensorPanel in AIDA64 / main menu / File / Preferences / Hardware Monitoring / Update Frequency. --- A couple of limitations and important things to know about this first SensorPanel beta: 1) Most of the settings are moved out of the usual place (the central AIDA64 Preferences), so you can control most properties of the SensorPanel items straight from the SensorPanel itself. Just use the right-click context menu to modify, remove or move an item, or to close the SensorPanel. We'll add more options into the right-click menu soon. 2) You can only put BMP and PNG format images on the SensorPanel right now. We'll add JPEG support later on. In case you want to add a full background image to the SensorPanel, make sure to use BMP format, since it is the most efficient way to handle large images. 3) Currently there's only one bar style, a solid (classic) one. In case you've seen a bar design that you think would look cool in AIDA64, make sure to post a screen shot here in this topic. We'd like to extend the range of bar styles to allow fancier SensorPanel design, and also to make it easier to tell various sensor item bars apart from each other. 4) We'll implement sensor graphs in the near future too, probably before the summer. In case you have an idea about a visual sensor item representation that is not a simple label, not a bar, and not a graph, then post your idea in this topic, and we'll discuss it. 5) Currently there's no way to re-order the items to allow better overlaying and to allow placing an image behind a sensor item easier. Currently you need to add the images first, and then the sensor items, to make sure the sensor items are shown in front of the image(s). We'll add a "SensorPanel Manager" feature soon, to let you have a quick overview on all the items placed on the panel, and to re-order the items. BTW, it's possible to re-order items right now, if you close AIDA64, and edit AIDA64.INI file in a text editor. Not a very user-friendly way, but please keep in mind that this whole SensorPanel feature is only in the first beta stage right now 6) We have a lot of plans to make it easier to handle the panel items, and to generally make the SensorPanel user-friendly. For example: - Lock the size of the panel, so the user cannot accidently resize it. - Lock the position of the panel, so the user cannot accidently move it. - Temporarily hide one or more items on the panel, and also to unhide them. - Flashing the sensor item when the sensor value reaches the "Limit3" point. 7) Even though AIDA64 doesn't warn you about this, but it's important to understand that when you enable a bar, and you select its Place as "Embedded", then you need to set the bar's Indent property to a non-zero value to let the label text fit there. If you leave the "Indent" at zero, the label will be hidden under the bar. 8) FYI, even though the SensorPanel feature was developed as a replacement for both the OSD Panel and Sidebar Gadget feature, it will not effectively replace them. So if you prefer the easier layout of the old features, you can still use them. You can even use them together, if you want. If you have more ideas about how to make the SensorPanel feature more convenient, let us know here in this topic. Thanks, Fiery
  17. 1 point
    Thank you for the data. We'll add the 2 missing temperature readings in the next AIDA64 update that is rolling out tomorrow. As for the Adaptec issue, have you tried to enable Adaptec RAID support in AIDA64 / main menu / File / Preferences / Stability? Make sure to restart AIDA64 after altering that option.
  18. 1 point
    When that happened to me (the lcd is black or the sensor panel i only half to view....) it was my screen resolution for my main screen that wasn't set to the game specs.
  19. 1 point
    Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps.
  20. 1 point
    Go to AIDA64 / main menu / File / Preferences / Stability, and enable both the following options: Embedded Controller (EC) support Embedded Controller (EC) bank switching After altering those options, make sure to restart AIDA64 to apply the changes.
  21. 1 point
    I've sent you a private message about this issue.
  22. 1 point
    It's due to the difference in motherboard and CPU as well.
  23. 1 point
    Please note that in order to detect the missing details, the camera ID information had to be previously encoded into the Android profile of the device. When the manufacturer of the devcie (in your case Sony) didn't encode the info there, then sysinfo apps cannot read or detect it.
  24. 1 point
    If the drive has a very smart controller that desperately tries to hide the fact that the capacity is less than the advertised value, then for a while the Random Write + Verify test may not report any issues. Especially when the performance is that freakishly low With such an underperforming drive you would have to let the Random Write + Verify test run for at least 2 days to draw any meaningful conclusion. Good old fraudulent pendrives which perform adequatly (like 20-30 MB/s) are usually caught by the test in a matter of minutes, sometimes few seconds only. But it's always best to let the Linear Write + Verify test to complete to 100%, since that's the only sure way of knowing that the drive can be filled 100% with data, and all data is fully retained (stored) by the drive.
  25. 1 point
    Here is mine, made to match some desktop gadgets I like to use. sensor.sensorpanel
  26. 1 point
    Thank you. Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works
  27. 1 point
    Thank you for the data. Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta Let me know if it helps
  28. 1 point
    this is my first try at this. haven't got around to labeling everything yet, but i made this one for my remote lcd panel. does anyone know if a lower update rate will impact system performance for remote lcd? as in like 500ms?
  29. 1 point
    Thank you. The lack of proper sensor readings is due to the fact that AIDA64 is unable to use its kernel driver. That could be because the kernel driver file (KERNELD.X64 or KERNELD.X86) is missing, or your Windows user has no administrator privileges, or a Windows prevents to elevate the security privileges of AIDA64.
  30. 1 point
    Thank you! We don't have any presets available, but you can use some of the SensorPanel layouts other users posted to: https://forums.aida64.com/topic/667-share-your-sensorpanel/
  31. 1 point
    I'd start with: 1) Update motherboard BIOS to the latest one 2) Set memory module timings to a more relaxed setting, dictated by the classic SPD block rather than the XMP (Extreme Memory Profile). If that still doesn't help, then I'd try it with 2T Command Rate (tCR or tCMD) setting as well. If none of those help, it could still be a faulty memory module, a dying motherboard or a faulty PSU. Not easy to diagnose such issues though If you have a chance to borrow a reliable PSU, it would worth checking that too. Regards, Fiery
  32. 1 point
    Go to: http://www.aida64.com/downloads Download AIDA64 Extreme, install it, run it, and go to main menu / Tools / System Stability Test. Uncheck all subtests except for FPU, and press the Start button. Watch the bottom graph, particularly the green graph that shows CPU throttling activity. Wait for at least an hour, and see if the green graph becomes red, indicating that your CPU throttles. No matter what various temperature readings show actually. If your CPU throttles under heavy load, then you have to do something about cooling to prevent that from happening
  33. 1 point
    Then I suppose the issue is that AIDA64 sets the fan speed to its default value (or the one you configured as Asetek fan speed), but then Corsair Link software will override that when it is running in the background. That's a collision that we cannot avoid on our end, and is caused by the improper USB API that some Asetek-6 based water coolers use. The problem is that you cannot detect water cooler temperature and fan RPM reading without altering the fan duty cycle (%) setting So you have to send a duty cycle value in order to get sensor readings back.
  34. 1 point
    Please don't mix PCH and PCH Diode temperatures. The first one comes from the onboard sensor chip, if it supports that readout. The latter comes from the PCH (chipset) itself, if it supports it. The latter doesn't need motherboard-specific support, so we cannot add it. Your PCH either supports the readout or not, and your BIOS either configures the PCH thermal controller properly or not.
  35. 1 point
    I don't think so. What could happen is a faster battery discharge when you keep AIDA64 running in the background to monitor your notebook. Monitoring hardware uses a few percentage of CPU load, and that causes higher overall system power draw than without it.
  36. 1 point
    The mentioned new AIDA64 beta update is available for download at: http://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works
  37. 1 point
    Hi, The Portuguese language needs improvement and it will be better with the AO 1990 that is more than in use now. Eg., Max. Visible Display Size=Tamanho de visão máximo -> Tamanho de visualização máximo Picture Aspect Ratio=Relação de aspecto da imagem -> Formato da imagem Viewing Angles=Ângulos de Visão -> Ângulos de Visualização Input Connectors=Conectores de Entrada -> Conetores de Entrada Embedded=Embutido ?!?!?!? -> Integrado or Incorporado ATA Device Features=Características do Dispositivo ATA -> Funionalidades do Dispositivo ATA Track-to-Track Seek=Busca pista por pista --- Busca?!?!?!??! Max. -> Máx. Por favor -> Por favor, etc... Regards, MS
  38. 1 point
    The issue will be fixed in the next AIDA64 beta update due in a few days from now Regards, Fiery
  39. 1 point
    That only means the Strike7 SDK causes a crash in its DLL, and that pulls AIDA64 main process down with itself I'd be happy to help you out, but at this point we both are at the mercy of Mad Catz. If they could try this out and find the issue in their SDK and fix it up, that would of course fix this whole thing. Or, if they can find an incompatibility between their SDK and AIDA64, then we would be happy to work with them to resolve it. The main problem is that we cannot reproduce the issue on our own Strike7 keyboard. If we could do that, things would probably be a bit easier. Please try to put a bit more pressure on Mad Catz, as a customer who's having issues using their product.
  40. 1 point
    Hello With this forum, I can't copy/paste the text when I post a message. And I can't "add to post" file in a message How tio fix it ? Thanks
  41. 1 point
    Thank you, we've fixed this issue in the latest beta version of AIDA64 Extreme available at: http://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Regards, Fiery
  42. 1 point
    It depends on the actual protocol your LCD uses. In theory, AIDA64 is well prepared to support virtually any LCD devices that can display a bitmap image directly. It already supports over 50 different LCD protocols, and a wide range of connection options, including USB, WiFi, LPT (parallel), COM (serial). It would be important for us to understand what exactly needs to be done to push a bitmap image into your LCD screen, so please share any technical detail you've got on that. If it uses a proprietary protocol that you wouldn't wanna share with others, then please drop me a private message with your email address, and we'll continue discussing this in email. Thanks, Fiery
  43. 1 point
    It is Logitech's DLL, part of the Logitech G-Series driver package called LgLcdApi.dll. Try to reinstall the drivers, it should help.
  44. 1 point
    The new release comes with support for a wider range of external LCD and VFD displays, including alphanumeric, monochrome and color panels, on which AIDA64 can directly display temperatures, voltages and fan speeds as well as other system information. The July update also introduces support for the latest and upcoming processor and graphics technologies and storage devices. New features & improvements - Support for new LCD and VFD devices: Abacom (ExpertProfi), AlphaCool, Digital Devices, LCD2USB, Mad Catz Venom, Matrix Orbital LK, Matrix Orbital GLK, Matrix Orbital GX, nMedia Pro-LCD, Pertelian X2040, SDC Megtron, SoundGraph iMon VFD, VL System LIS, VL System LIS 2 - Advanced support for monochrome LCDs - SMTP SSL support - Improved handling of XSL files - OpenGL ES 3.1 support - Revamped Direct3D Compute Shader devices enumeration - Plextor M6M, Plextor M6S, Samsung 845DC Evo, Samsung 850 Pro SSD support - GPU details for Mobile AMD Radeon R9 Series, FirePro W8100 - GPU details for nVIDIA GeForce GT 730, Quadro K2200M What's new since AIDA64 v4.00 - Microsoft Windows 8.1 Update 1 and Windows Server 2012 R2 Update 1 support - OpenCL GPGPU Benchmark Suite - AMD Mantle graphics accelerator diagnostics - Multi-threaded memory stress test with SSE, SSE2, AVX, AVX2, FMA, BMI and BMI2 acceleration - Optimized 64-bit benchmarks for AMD “Kaveri”, “Bald Eagle”, “Mullins”, “Beema” APUs - Optimized 64-bit benchmarks for Intel Atom C2000 “Avoton” and “Rangeley” SoC - Optimized 64-bit benchmarks for Intel “Bay Trail” desktop, mobile and tablet SoC - Full support for the Intel “Haswell Refresh” platform with Intel “Wildcat Point” PCH - Razer SwitchBlade LCD support - Improved support for Intel "Broadwell" CPU - Preliminary support for AMD "Carrizo” and "Toronto" APUs - Preliminary support for Intel Quark X1000 “Clanton” SoC - Preliminary support for Intel "Skylake", "Cherry Trail", "Denverton" CPUs - Improved support for Intel “Haswell-E” CPU and DDR4 memory modules - Support for DDR4 XMP 2.0 memory profiles - Intel H97 and Z97 chipset based motherboards support - Socket AM1 motherboards support - CUDA 6.0 support - Improved support for OpenCL 2.0 - Support for VirtualBox v4.3 and VMware Workstation v10 - A-Data SP920, Crucial M550, Intel 730, OCZ Vector 150, OCZ Vertex 460, Samsung XP941 SSD support - GPU details for AMD Radeon R5, R7, R9 Series - GPU details for nVIDIA GeForce 700 and 800 Series [ Press Release (English) ] [ Press Release (Deutsch) ] [ Press Release (italiano) ] [ Press Release (magyar) ] [ Press Release (Русский) ] [ Press Release (český) ] [ Press Release (polski) ] [ What's new in AIDA64 v4.60 ] [ Download ]
  45. 1 point
    Th well e manufacturer makes the choice at manner a the maximum rate of manner a instinctively
  46. 1 point
    Nice 1st post, thank you And you've got quite a fleet of PCs
  47. 1 point
    Please upgrade to the latest beta version of AIDA64 Extreme available at: http://www.aida64.com/downloads/aida64extremebuild2622dmr7jqwpnyzip After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works. Thanks, Fiery
  48. 1 point
    For Italian users, we have a guide in Italian on how you can create a fully customized SensorPanel in AIDA64 Extreme Edition. (FYI: this is a pre-3.20 post so it does not cover area graphs and histograms, which have just been introduced, but these can be configured the same way as a line graph.) Come creare e personalizzare il SensorPanel di AIDA64? Hope it helps!
  49. 1 point
    You can try reinstalling Windows, updating drivers, updating BIOS, but I'm not sure if those would help at all in your case. It worth a try though.
  50. 1 point
    Hey, I know this thread is somewhat old, but I was looking to start a thread where everyone posts their sensorpanel display; apparently this one was already here, so I figured I would just join the party. I have had Aida 64 for some time, and have been using the OSD. I somehow caught wind of the sensor panel just last night (I didn't know about it), and after a few hours this is what my display looks like (this is my left monitor). I'm quite happy with how it came out, and I thought I would share.
×
×
  • Create New...