Jump to content
AIDA64 Discussion Forum

Leaderboard


Popular Content

Showing content with the highest reputation since 08/11/15 in all areas

  1. 8 points
    My Custom sensor panel, in the style of Asus' AI suite. It's 800 x 460 as this will be displayed on an in-case LCD-screen. The dials on top are dynamic, as well as the animated fan icons. I'm quite pleased with it. In case anyone's interested, I'll post a picture with the final result!
  2. 6 points
    new set of gauges , If some like it, leave coment and i sent you on you email. I have for LCD and sensor panel in ( Large and medium sizes ) in png
  3. 4 points
    Some new gauges. LOAD and IDILE. If some like it, leave coment and i sent you on you email. I have for LCD and sensor panel in ( Large and medium sizes ) in png
  4. 3 points
    Although I have made some detailed panels that looked ok to me I have come to realize that because I'm using a 5" LCD as my panel monitor I can't see the sensors because everything is just way too small so I decided to use only what I think would be helpful to my situation this round. Thank you StealthDefender for helping me realize this I would also like to thank Stupe9968 for the killer gauge templates . My new panel (I'm still kinda messin with it) So I just finished my new long awaited rig, specs are as of the following: PC Name - Jedi Assassin Motherboard - Gigabyte GA Z370 Aorus Gaming 7 CPU - Intel i7-8700k @ 5.0 MHz, 1.350 V CPU Cooler - NZXT Kraken X52 RAM - G-Skill Trident Z RGB 16G (2x8) DDR4-3000 MHz 16-18-18-38 CR2 SSD - Samsung M.2 960 EVO 500 MB (Temp) Portable HDD - Seagate Expansion 2 TB GPU - Gigabyte GeForce GTX 1060 Aorus Extreme Gaming 6GB Main Monitor - Viotek GN34C 34" curved 3440 x 1440 100Hz + O.C. Sensor Panel Monitor - 5" LCD attached to case PSU - EVGA SuperNova 850 G2 Gold Case - Phantek Enthoo Pro 2x NZXT 5x USB hub Speakers - Logitech Z623 200watt 2.1 THX Certified LG Blu-Ray DVD/Burner FANS 5x 120mm Thermaltake Riing plus RGB 2x 120mm NZXT 2x 140mm Corsair High Volume Purple LED
  5. 3 points
    Thank you for sharing your creation I copied your idea to create a similar panel for spf-87 if this a problem for you. I'm sorry and I delete this post spf-87h.splcd.axlcd
  6. 3 points
    We wanted to wait to tell final judgement on this issue until we have more info and more input. It's a Windows 10 bug indeed that plagues Windows 10 Insider Build 16273 and 16275, but only the 64-bit editions. It prevents certain software to install and use its otherwise perfectly fine kernel driver. The issue affects several software, not just AIDA64. We're already working on a workaround, but we also expect Microsoft to fix this up soon. I'll post a message into this topic once we have an update.
  7. 3 points
    Thanks for the quick fix. All working fine now. Here is my custom panel. System Idle Example System Load Example Desktop Example If any one wants to use it you can download it from my blog - http://blog.psine.com/sensorpanel.html
  8. 3 points
    Hello I heard/read that Windows 8.1 64-bit needs the following CPU support: - CMPXCHG16b - LAHF/SAHF - PrefetchW (http://windows.microsoft.com/en-us/windows-8/preview-faq) CMPXCHG16b and LAHF/SAHF I can find in the Aida64 CPU Instructions set list, but not PrefetchW. Does it have another name or ist it missing ?
  9. 3 points
    This Industrial PC (Aaeon AHP-1081: http://www.aaeon.com...3_TW_UTF-8.html) is unknown for AIDA64 2.70.2112. Here is the report.htm. Hope this helps! Report.zip
  10. 3 points
    After buying a new comp i was started with modding. More info - http://nl.hardware.i...irus_59-edition SilverStone Fortress FT03 Black + MIMO 720F Touchscreen USB Monitor (7" 800x480) He was supposed to be better than the old one. Lian Li PC-A05NBF Black + Alphacool LC-Display 240x128 I was looking for software to use the built-in monitor as my old Alphacool LC-Display. And I found AIDA64. The first attempt / v1 The second attempt / v2 - v2.sensorpanel The third attempt / v3. I use now v3 BW 128 v2 - v3.sensorpanel - v3 BW.sensorpanel - v3 BW 128.sensorpanel - v3 BW 128 v2.sensorpanel Possible future - v4.sensorpanel I can't upload anymore, the limit is reached Now I'm waiting for the appearance of the possibility to monitor hard drives and wireless signal strength.
  11. 2 points
    Hi, Aida64 now provides support for the Odospace Remote Panel app: Reuse your old android device to display sensor values of a Windows PC. A WiFi connection is not (!) required, Remote Panel works even when the device is connected to the PC via USB only. However, an SDK for Remote Panel is provided also. Sensor values are provided by the industry-leading system information tool Aida64 which must be purchased separately. Please note that Remote Panel is not affiliated with Aida64 or FinalWire in any way shape or form and no support can be provided by the Aida64 team for this app. Requirements - Aida64 version 5.20.3414 or heigher must be installed on the Windows PC. - Remote Panel (for Windows) version 1.16 must be installed and running, it can be downloaded with the following link http://apps.odospace.com/RemotePanelSetup.exe - Microsoft .Net framework 4.5 must be installed on the Windows PC. This will be done during the installation of Remote Panel (for Windows). - The android device vendor's drivers must be installed on the Windows PC. - USB debugging must be enabled on the android device. This is described in detail here. Enable Aiada64 plugIn - After installation of Remote Panel (for Windows) Aida64 must be restarted. - Within Aida64 open the preferences page, navigate to LCD and enable "Odospace". Add items within the LCD items page. Settings - A long press within the view opens the settings dialog. Troubleshooting - In general the settings dialog of Remote Panel (for Windows) can be opened from the popup menu of its tray icon. - Remote Panel (for Windows) uses port 38000 and 38001 for local communication, if you experience problems because another PC program is using one of this ports, change the port number within the Remote Panel (for Windows) settings dialog and within the Aida64 Odospace LCD plugin. - Remote Panel (for Windows) uses the Android Debug Bridge (adb.exe) for communication. If you experience problems with other Android synchronization programs, try to use another adb.exe file - it can be changed within the settings dialog of Remote Panel (for Windows). - On default, Remote Panel (for Windows) checks every 30 seconds for new devices, decrease this value within the settings for faster device recognition, increase this value for less CPU usage. Alternative usage - If an additional PC should send its sensor values to the android device, set the IP address within the Aida64 Odospace LCD plugin to the address of the PC where the android device is connected. For every PC specify a different panel position parameter. Remote Panel (for Windows) must be installed on every PC, however the Remote Panel (for Windows) executable must only be started on the PC where the Android device is connected. - Remote Panel can be used within a WiFi network also, in such case set the IP address within the Aida64 Odospace PlugIn to the device's address. The port must be set to 38000. The Remote Panel (for Windows) executable can be stopped in this case. Advanced topics - To automatically start Remote Panel you can use AutoStart. - To power off the device on PC shut down you can use AutomateIt Pro - use the USB disconnect trigger. - If the device battery discharge even connected via USB, try to set the CPU speed to a lower level. For example you can use Tickster MOD. - To power on the device on PC startup the device firmware must be modified (follow this AT YOUR OWN RISK, tested with Cyanogenmod 10.2 on LG P760/P880 and may not work with all devices): General 1. Download the device firmware - it can be the original or custom ROM. 2. Use Boot/Recovery Repacker to extract the boot.img file of the downloaded ROM. 3. Within the file init.rc, in the section beginning with "on charger" replace the string "class_start charger" with "trigger boot" or "trigger late-init". Ensure that your editor writes the file in UNIX format. 4. Use the repacker to compress the boot.img file. 5. Apply the new firmware. Nexus 7 (2012) 1. Boot in fastboot mode 2. Issue the following command within a command prompt: "fastboot oem off-mode-charge 0" Version 1.14 - Now sensor data of multiple PCs can be displayed on one android device - The android device can be connected to any PC (not only to the PC where Aida64 is running) - Requires Aida version 5.20.3414 or higher and Remote Panel (for Windows) version 1.14a Version 1.15 - Fullscreen mode (long press for settings) - RemotePanel (for windows) version 1.15: Verbose mode for better problem handling, fixes a rare ADB hang when multiple PCs are connected to one android device. Version 1.16 available - New option added: Keep screen on (long press for settings) Many thanks to the Aida64 team for the great support! Best regards odospace
  12. 2 points
    There must be something wrong about the OpenCL software stack. Try to uninstall and reinstall ForceWare.
  13. 2 points
    Thank you. Here's the fix for your motherboard as well as other motherboards that are affected by the same anomaly. https://www.aida64.com/downloads/latesta64xebeta
  14. 2 points
    New Text Version, uses on Desktop > text_v2.sensorpanel Adapted to 5 Inch Dispaly with 800x480 Pixels > PiDisplay.sensorpanel PiDisplay.sensorpanel text_v2.sensorpanel
  15. 2 points
    Here is how it's coming along ... the gauges will be in green (still have to make them) check your email and get back to me.... also the background file is in the zip file below. I am doing this for free so please keep my "branding" in the bottom lower right of the panel Red - MSI - background 2 test.zip
  16. 2 points
    Ok cool I'll see what I can come up with for ya we can fine tune it later on ...
  17. 2 points
    You're right, 16278 carries on the issue. We need to release one more AIDA64 hotfix to get around it again. We'll do that tomorrow or worse case Friday. I'll post a message into this topic once the new AIDA64 beta build is available for download.
  18. 2 points
    Got a bit carried away with XCOM2 and hunting down a (possible) memory issue...
  19. 2 points
    This is a real layout GA-Z77X-UD5H. Panel size 1000x792 GA-Z77X-UD5H.2015-11-20.sensorpanel I have layered .psd file.
  20. 2 points
    Hi, im big fan of Fallout series so i made it pipboy like.
  21. 2 points
    Here is my AIDA64 Sensorpanel, it was a heavy working:)image
  22. 2 points
    Hey guys, just thought you might like my Star Trek TNG sensor panel. I styled it like the control panels from The Next Generation. It's fully functional. I'm always tweaking though. It's a large size. 1024 x 972. I usually use it with 25% transparency on my 1600 x 900 desktop. I may do another design, just to switch up now and again.
  23. 1 point
    Thanks for the feedback. The new items should be available for the SensorPanel automatically -- but they're not added to the SensorPanel layout automatically. You need to right-click on your SensorPanel --> New, and pick the item you're looking for.
  24. 1 point
    I'd make sure to have the system running at stock settings (no overclock). If it still doesn't work, then try to borrow a PSU from a friend and check if it is the culprit or not. If that still doesn't solve it, try to borrow a set of RAM modules. If it still doesn't solve it, then it could well be the motherboard, which is the most difficult part to replace.
  25. 1 point
  26. 1 point
    Hey man this is just an idea of what I have so far , I need a little more info from you like how many fans/water pumps are you going to monitor and just what you want to monitor in general so I have a little more to go on......I assumed red in color cause MSI is usually red....
  27. 1 point
    Thank you for your answer. I will not worry anymore about battery wear level
  28. 1 point
    RTSS labels cannot be customized at this time, so AIDA64 uses their default values. Regards, Fiery
  29. 1 point
    System availability indicates the percentage of a day that your system is up (online, in use). So for example, if you use your computer between 8am and 4pm every day, including weekends and holidays, your system availability will be 33% (8 hours out of 24 hours). If you however use your computer only between 8pm and 10pm on Saturdays and Sundays only, then your system availability will be 2%.
  30. 1 point
    Aida64.... Nice app... Keep supportig Tizen OS....
  31. 1 point
    We have exactlyone app per platform One AIDA64 for each platform, but no multiple apps for any platform (yet).
  32. 1 point
    Hi, i also downloaded this Beta Version you Suggested but it says that i dont have a licence for that version. My current Version 5.80.4000 doesn't support my 1080ti. Any help would be appreciated. Ah ok...i see now, support for my AIDA64 Ended on 11.12.2016 :(... Regards Simon
  33. 1 point
    Please send me your old email address and full name in private message, and I'll send you your AIDA64 product key.
  34. 1 point
    We're working together with Corsair, NZXT and Asus right now, in order to improve the synchronization (interlocking) between their respective monitoring software and AIDA64. We're glad if you guys can notice the progress
  35. 1 point
    We will add the missing temperatures in the next AIDA64 beta update due later this week. I'll post a message into this topic once the new beta becomes available for download.
  36. 1 point
    i just built a killer rog rig... this saves me a ton of time... kudoz to you and the author...
  37. 1 point
    I'm afraid it's not possible to measure RAM clock speed under Android. Regards, Fiery
  38. 1 point
    We are the developers behind the AIDA64 for Android app. We can upgrade our app, but cannot upgrade the platform (Android). Regards, Fiery
  39. 1 point
    We've checked the new Android N Developer Preview 2 on our Nexus 9, but the Vulkan layer doesn't seem to work properly yet. When we try to initialize Vulkan by calling vkCreateInstance, it says: E/vulkan: failed to load vulkan hal: No such file or directory (-2) Maybe a different device or the next preview would help. Or maybe there's a trick, maybe it is necessary to use special initialization with Vulkan for Android. We'll keep trying...
  40. 1 point
    Then I suppose the issue is that AIDA64 sets the fan speed to its default value (or the one you configured as Asetek fan speed), but then Corsair Link software will override that when it is running in the background. That's a collision that we cannot avoid on our end, and is caused by the improper USB API that some Asetek-6 based water coolers use. The problem is that you cannot detect water cooler temperature and fan RPM reading without altering the fan duty cycle (%) setting So you have to send a duty cycle value in order to get sensor readings back.
  41. 1 point
    Make sure to upgrade to the latest beta version of AIDA64 Extreme available at: http://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps.
  42. 1 point
    The mentioned new AIDA64 beta update is available for download at: http://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know how it works
  43. 1 point
    I don't think such an issue makes your driver eligible for a replacement or repair. It's not a re-allocated sector (a.k.a. bad sector), but only a pending sector. You could call it a "suspicious sector" that may or may not become a bad sector. What I would do is install HDSentinel and keep it running, and configure its alerting system to warn you about any further issues that may come up. That pending sector may mean nothing, or may be a "teaser" of worse things to come. It's hard to tell which one, at this time.
  44. 1 point
    AIDA64 uses the Strike7 SDK by the book, following Mad Catz's specifications and guidelines. So in case the Strike7 software makes AIDA64 crash, or the Strike7 software stops talking to AIDA64, then I'm afraid you have to ask Mad Catz for a resolution. In case Mad Catz investigates the issue and points to a problem about our implementation of the Strike7 protocol in AIDA64, then we would be happy to fix it on our end.
  45. 1 point
    Hello With this forum, I can't copy/paste the text when I post a message. And I can't "add to post" file in a message How tio fix it ? Thanks
  46. 1 point
    Well here is one of many... I bench / overclock so lots of component swapping back and forth. Functional and necessary stuff to monitor while overclocking to the limits
  47. 1 point
    Hello, I have a laptop with a AMD A8 5557m APU and a dedicated HD 8750M GPU. But Aida64 only shows me the data of the 8550G in the APU, it doesn't identify my dedicated GPU. Please help... Drivers are 13.12 WHQL.
  48. 1 point
    I know I'm not the OP but I'll give some feedback anyway. This works fine on my Toshiba Satellite P50t - the Nvidia GPU is always detected now, whether I have a 3D application open or not.
  49. 1 point
    This SensorPanel was styled as a Gadget (update 2012.03.12) Edit: images deleted for space
  50. 1 point
×
×
  • Create New...