Jump to content
AIDA64 Discussion Forum

Leaderboard


Popular Content

Showing content with the highest reputation since 05/16/16 in all areas

  1. 8 points
    My Custom sensor panel, in the style of Asus' AI suite. It's 800 x 460 as this will be displayed on an in-case LCD-screen. The dials on top are dynamic, as well as the animated fan icons. I'm quite pleased with it. In case anyone's interested, I'll post a picture with the final result!
  2. 6 points
    new set of gauges , If some like it, leave coment and i sent you on you email. I have for LCD and sensor panel in ( Large and medium sizes ) in png
  3. 4 points
    Some new gauges. LOAD and IDILE. If some like it, leave coment and i sent you on you email. I have for LCD and sensor panel in ( Large and medium sizes ) in png
  4. 3 points
    Although I have made some detailed panels that looked ok to me I have come to realize that because I'm using a 5" LCD as my panel monitor I can't see the sensors because everything is just way too small so I decided to use only what I think would be helpful to my situation this round. Thank you StealthDefender for helping me realize this I would also like to thank Stupe9968 for the killer gauge templates . My new panel (I'm still kinda messin with it) So I just finished my new long awaited rig, specs are as of the following: PC Name - Jedi Assassin Motherboard - Gigabyte GA Z370 Aorus Gaming 7 CPU - Intel i7-8700k @ 5.0 MHz, 1.350 V CPU Cooler - NZXT Kraken X52 RAM - G-Skill Trident Z RGB 16G (2x8) DDR4-3000 MHz 16-18-18-38 CR2 SSD - Samsung M.2 960 EVO 500 MB (Temp) Portable HDD - Seagate Expansion 2 TB GPU - Gigabyte GeForce GTX 1060 Aorus Extreme Gaming 6GB Main Monitor - Viotek GN34C 34" curved 3440 x 1440 100Hz + O.C. Sensor Panel Monitor - 5" LCD attached to case PSU - EVGA SuperNova 850 G2 Gold Case - Phantek Enthoo Pro 2x NZXT 5x USB hub Speakers - Logitech Z623 200watt 2.1 THX Certified LG Blu-Ray DVD/Burner FANS 5x 120mm Thermaltake Riing plus RGB 2x 120mm NZXT 2x 140mm Corsair High Volume Purple LED
  5. 3 points
    Thank you for sharing your creation I copied your idea to create a similar panel for spf-87 if this a problem for you. I'm sorry and I delete this post spf-87h.splcd.axlcd
  6. 3 points
    We wanted to wait to tell final judgement on this issue until we have more info and more input. It's a Windows 10 bug indeed that plagues Windows 10 Insider Build 16273 and 16275, but only the 64-bit editions. It prevents certain software to install and use its otherwise perfectly fine kernel driver. The issue affects several software, not just AIDA64. We're already working on a workaround, but we also expect Microsoft to fix this up soon. I'll post a message into this topic once we have an update.
  7. 3 points
    Hello I heard/read that Windows 8.1 64-bit needs the following CPU support: - CMPXCHG16b - LAHF/SAHF - PrefetchW (http://windows.microsoft.com/en-us/windows-8/preview-faq) CMPXCHG16b and LAHF/SAHF I can find in the Aida64 CPU Instructions set list, but not PrefetchW. Does it have another name or ist it missing ?
  8. 3 points
    After buying a new comp i was started with modding. More info - http://nl.hardware.i...irus_59-edition SilverStone Fortress FT03 Black + MIMO 720F Touchscreen USB Monitor (7" 800x480) He was supposed to be better than the old one. Lian Li PC-A05NBF Black + Alphacool LC-Display 240x128 I was looking for software to use the built-in monitor as my old Alphacool LC-Display. And I found AIDA64. The first attempt / v1 The second attempt / v2 - v2.sensorpanel The third attempt / v3. I use now v3 BW 128 v2 - v3.sensorpanel - v3 BW.sensorpanel - v3 BW 128.sensorpanel - v3 BW 128 v2.sensorpanel Possible future - v4.sensorpanel I can't upload anymore, the limit is reached Now I'm waiting for the appearance of the possibility to monitor hard drives and wireless signal strength.
  9. 2 points
    There must be something wrong about the OpenCL software stack. Try to uninstall and reinstall ForceWare.
  10. 2 points
    Thank you. Here's the fix for your motherboard as well as other motherboards that are affected by the same anomaly. https://www.aida64.com/downloads/latesta64xebeta
  11. 2 points
    New Text Version, uses on Desktop > text_v2.sensorpanel Adapted to 5 Inch Dispaly with 800x480 Pixels > PiDisplay.sensorpanel PiDisplay.sensorpanel text_v2.sensorpanel
  12. 2 points
    Here is how it's coming along ... the gauges will be in green (still have to make them) check your email and get back to me.... also the background file is in the zip file below. I am doing this for free so please keep my "branding" in the bottom lower right of the panel Red - MSI - background 2 test.zip
  13. 2 points
    Ok cool I'll see what I can come up with for ya we can fine tune it later on ...
  14. 2 points
    You're right, 16278 carries on the issue. We need to release one more AIDA64 hotfix to get around it again. We'll do that tomorrow or worse case Friday. I'll post a message into this topic once the new AIDA64 beta build is available for download.
  15. 2 points
    Got a bit carried away with XCOM2 and hunting down a (possible) memory issue...
  16. 2 points
    This is a real layout GA-Z77X-UD5H. Panel size 1000x792 GA-Z77X-UD5H.2015-11-20.sensorpanel I have layered .psd file.
  17. 2 points
    Hi, im big fan of Fallout series so i made it pipboy like.
  18. 2 points
    Here is my AIDA64 Sensorpanel, it was a heavy working:)image
  19. 2 points
    Thanks for the quick fix. All working fine now. Here is my custom panel. System Idle Example System Load Example Desktop Example If any one wants to use it you can download it from my blog - http://blog.psine.com/sensorpanel.html
  20. 2 points
    This Industrial PC (Aaeon AHP-1081: http://www.aaeon.com...3_TW_UTF-8.html) is unknown for AIDA64 2.70.2112. Here is the report.htm. Hope this helps! Report.zip
  21. 2 points
    Hey guys, just thought you might like my Star Trek TNG sensor panel. I styled it like the control panels from The Next Generation. It's fully functional. I'm always tweaking though. It's a large size. 1024 x 972. I usually use it with 25% transparency on my 1600 x 900 desktop. I may do another design, just to switch up now and again.
  22. 1 point
    Virtual memory is the whole memory space Windows can use for various purposes. It includes both physical memory and swap space (pagefile or pagefiles).
  23. 1 point
    Yes, and already added support for it in the latest AIDA64 beta update: https://www.aida64.com/downloads/latesta64xebeta You can activate the Rival 710 OLED module in AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD / SteelSeries. Let me know how it works.
  24. 1 point
    Special thanks to Novax as this entire Sensor Panel is a copy of his wonderful work. Thank you again for your creativity and generosity. HellKatDash02_08_2019.sensorpanel
  25. 1 point
    Hey, Would it possible to have a list like Task Manager does where the processes / applications that are using the CPU or network would come up. EDIT: On the LCD I mean. I ask for this as I find myself noting via AIDA64 on my LCD that the CPU might be at 20% and then I wonder what might be causing it so I open task manager to find out. It would be ideal if I could have a list like that on a different page on the LCD via AIDA64 so I could quickly check what was causing the spike. A similar idea for the network would be great like what's found in the "Processes with Network Activity" tab of the Resource Monitor. Many thanks.
  26. 1 point
    Hi, Aida64 now provides support for the Odospace Remote Panel app: Reuse your old android device to display sensor values of a Windows PC. A WiFi connection is not (!) required, Remote Panel works even when the device is connected to the PC via USB only. However, an SDK for Remote Panel is provided also. Sensor values are provided by the industry-leading system information tool Aida64 which must be purchased separately. Please note that Remote Panel is not affiliated with Aida64 or FinalWire in any way shape or form and no support can be provided by the Aida64 team for this app. Requirements - Aida64 version 5.20.3414 or heigher must be installed on the Windows PC. - Remote Panel (for Windows) version 1.16 must be installed and running, it can be downloaded with the following link http://apps.odospace.com/RemotePanelSetup.exe - Microsoft .Net framework 4.5 must be installed on the Windows PC. This will be done during the installation of Remote Panel (for Windows). - The android device vendor's drivers must be installed on the Windows PC. - USB debugging must be enabled on the android device. This is described in detail here. Enable Aiada64 plugIn - After installation of Remote Panel (for Windows) Aida64 must be restarted. - Within Aida64 open the preferences page, navigate to LCD and enable "Odospace". Add items within the LCD items page. Settings - A long press within the view opens the settings dialog. Troubleshooting - In general the settings dialog of Remote Panel (for Windows) can be opened from the popup menu of its tray icon. - Remote Panel (for Windows) uses port 38000 and 38001 for local communication, if you experience problems because another PC program is using one of this ports, change the port number within the Remote Panel (for Windows) settings dialog and within the Aida64 Odospace LCD plugin. - Remote Panel (for Windows) uses the Android Debug Bridge (adb.exe) for communication. If you experience problems with other Android synchronization programs, try to use another adb.exe file - it can be changed within the settings dialog of Remote Panel (for Windows). - On default, Remote Panel (for Windows) checks every 30 seconds for new devices, decrease this value within the settings for faster device recognition, increase this value for less CPU usage. Alternative usage - If an additional PC should send its sensor values to the android device, set the IP address within the Aida64 Odospace LCD plugin to the address of the PC where the android device is connected. For every PC specify a different panel position parameter. Remote Panel (for Windows) must be installed on every PC, however the Remote Panel (for Windows) executable must only be started on the PC where the Android device is connected. - Remote Panel can be used within a WiFi network also, in such case set the IP address within the Aida64 Odospace PlugIn to the device's address. The port must be set to 38000. The Remote Panel (for Windows) executable can be stopped in this case. Advanced topics - To automatically start Remote Panel you can use AutoStart. - To power off the device on PC shut down you can use AutomateIt Pro - use the USB disconnect trigger. - If the device battery discharge even connected via USB, try to set the CPU speed to a lower level. For example you can use Tickster MOD. - To power on the device on PC startup the device firmware must be modified (follow this AT YOUR OWN RISK, tested with Cyanogenmod 10.2 on LG P760/P880 and may not work with all devices): General 1. Download the device firmware - it can be the original or custom ROM. 2. Use Boot/Recovery Repacker to extract the boot.img file of the downloaded ROM. 3. Within the file init.rc, in the section beginning with "on charger" replace the string "class_start charger" with "trigger boot" or "trigger late-init". Ensure that your editor writes the file in UNIX format. 4. Use the repacker to compress the boot.img file. 5. Apply the new firmware. Nexus 7 (2012) 1. Boot in fastboot mode 2. Issue the following command within a command prompt: "fastboot oem off-mode-charge 0" Version 1.14 - Now sensor data of multiple PCs can be displayed on one android device - The android device can be connected to any PC (not only to the PC where Aida64 is running) - Requires Aida version 5.20.3414 or higher and Remote Panel (for Windows) version 1.14a Version 1.15 - Fullscreen mode (long press for settings) - RemotePanel (for windows) version 1.15: Verbose mode for better problem handling, fixes a rare ADB hang when multiple PCs are connected to one android device. Version 1.16 available - New option added: Keep screen on (long press for settings) Many thanks to the Aida64 team for the great support! Best regards odospace
  27. 1 point
    We've fixed the issue in the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Let me know if it helps when your nVIDIA GPU is sleeping or went to sleep after a few minutes of inactivity.
  28. 1 point
    Thank you, but that dump doesn't include EC registers. Please enable status bar in AIDA64 / main menu / View, and on the status bar (which will appear on the bottom of the AIDA64 main window) do a right-click --> Sensor Debug --> Embedded Controller Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.
  29. 1 point
    Thank you for the dumps. I'm not sure what's happened, but we'll fix this issue in the next AIDA64 beta due in a few days from now. I'll post a message into this topic once the new beta build is available for download.
  30. 1 point
    HWiNFO and HWMonitor might fit the bill.
  31. 1 point
    Hi, I was wondering if it would be possible to make it so that the date format could be changed ? For now it is: 8.08.2018 It would be great if that could be changed for example to: 08.01.2018 or Monday 8 January 2018 or any combination of these. (user configurable) (And optional leading zero for clock hours too, because time jumps left and right with some fonts if hours change from one number to two.)
  32. 1 point
    Hello I have a problem with rams, they are indicated as on the screen in Aida64, while it will have to be A1, B1, C1, D1 and I have the temperature of the water plugged into the "Water In" port on the motherboard, but it indicates Temperature N°1 in Aida64 It is possible to rename in "Water" (the "In" and "Out" to put in Extended Labels) and it's "duplicate" with T-Sensor 1 Asus having made the effort to add these ports, as long as they are named correctly in Aida64 And for Water Flow, in bios it is indicated in l/m, in Aida64 it is indicated in RPM Possible to have in l/m (see in l/h) in Aida64 Thanks And merry christmas
  33. 1 point
    Hey man this is just an idea of what I have so far , I need a little more info from you like how many fans/water pumps are you going to monitor and just what you want to monitor in general so I have a little more to go on......I assumed red in color cause MSI is usually red....
  34. 1 point
    It's due to the difference in motherboard and CPU as well.
  35. 1 point
    @Aidaknow, @TungstenMD - I've created a tool (still beta version), that automates workaround mentioned above. It triggers whenever Windows background changes, takes a snippet of current background, and saves it to a file (you'll setup Aida64 to use this file as panel background and It'll automatically reload it's background whenever said file changes). There's a lot to be improved, but it works as-is for me in Windows 8.1 I plan on preparing some more detailed description, and improving this tool, but since it might be hard for me to find some time - I hope this will somewhat solve the problem. Note 1: Your input file will vary (it's most likely C:\Users\ [YOURUSERNAME] \AppData\Local\Microsoft\Windows\Themes\TranscodedWallpaper). Note 2: Right now all wallpapers in slideshow need to be correct size, as no rescaling is implemented. Note 3: If you've got problem setting it up please let me know. If it works let me know as well https://github.com/dkopec91/BGSnippet exe: https://goo.gl/Qzx9aV EDIT: Second version is available to download at this page
  36. 1 point
    It could mean that the memory frequency is too high, the memory timings are too tight, or the memory modules aren't compatible with your motherboard. Try to run other memory tests as well, to confirm that the memory modules aren't working properly across different tests.
  37. 1 point
    The above mentioned new AIDA64 beta update is available for download at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. Please let us know how it works on your system.
  38. 1 point
    IMHO you need to contact MSI (the maker of your motherboard) to find out more about the voltage issue as well as for the purpose and meaning of the red LED.
  39. 1 point
    Update: Support for the Command Pro protocol will be implemented in the next AIDA64 beta update due later this week. I'll drop a message into this topic once the new beta build is available for download.
  40. 1 point
    Hi Of course, an update is scheduled to support new devices very soon. Thanks for the report.
  41. 1 point
    Please send me your old email address and full name in private message, and I'll send you your AIDA64 product key.
  42. 1 point
    Thank you, I'm glad things are going in the right direction
  43. 1 point
    We're working together with Corsair, NZXT and Asus right now, in order to improve the synchronization (interlocking) between their respective monitoring software and AIDA64. We're glad if you guys can notice the progress
  44. 1 point
    Thank you for the data. Please upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta Let me know if it helps
  45. 1 point
    1) Tough issue. These days what you can get easily is usually too expensive and also too small for your needs. When it comes to large colour LCD screens, we generally recommend getting an old Android tablet or iPad and use RemoteSensor or Odospace, or to simply go for an old TFT LCD monitor that you can hook up to an unused DSub or DVI connector. The monitor solution would enable you to extend your Windows Desktop to that display, and use AIDA64 SensorPanel instead of the LCD module. It enables more flexibility too, since you can move any window to that screen. And no, not any LCD displays would work. Most of those that support bitmap transfer through the USB connection should work. 2) The following special temperature readouts of Maximus VIII Extreme and Formula boards are supported by AIDA64: T_Sensor1 EXT_Sensor1 EXT_Sensor2 EXT_Sensor3 The rest (T_Sensor2 and T_Sensor3) cannot be measured via AIDA64 right now. 3) I'm afraid we're not experienced that much in water cooling setups, so you have to ask that question on a different forum. But, as long as you can connect the flow meter to a fan header, and it reports the flow rate just as a fan would report its RPM measurement, then you can handle the device in AIDA64. The reported value would still be RPM though. You can use the Correction feature of AIDA64 (main menu / File / Preferences / Hardware Monitoring / Correction) to apply an offset or multiplier on the RPM readout. Regards, Fiery
  46. 1 point
    You can configure clock, temperature and voltage decimal digits in AIDA64 / main menu / File / Preferences / Hardware Monitoring. Regards, Fiery
  47. 1 point
    Yes, it's already been implemented in AIDA64 v5.75 (latest stable release).
  48. 1 point
    That's because AIDA64 reads EC registers directly, using classic ISA port I/O. You can ignore the warning messages.
  49. 1 point
    I know I'm not the OP but I'll give some feedback anyway. This works fine on my Toshiba Satellite P50t - the Nvidia GPU is always detected now, whether I have a 3D application open or not.
  50. 1 point
    PCH is the chipset component of your motherboard. It tends to run a bit hotter than processors, especially at idle. Anything above 80 Celsius is considered high for chipsets, and beyond 90 Celsius is considered critical. Regards, Fiery
×
×
  • Create New...