Jump to content
AIDA64 Discussion Forum

Leaderboard


Popular Content

Showing content with the highest reputation since 01/06/17 in all areas

  1. 7 points
    My Custom sensor panel, in the style of Asus' AI suite. It's 800 x 460 as this will be displayed on an in-case LCD-screen. The dials on top are dynamic, as well as the animated fan icons. I'm quite pleased with it. In case anyone's interested, I'll post a picture with the final result!
  2. 3 points
    We wanted to wait to tell final judgement on this issue until we have more info and more input. It's a Windows 10 bug indeed that plagues Windows 10 Insider Build 16273 and 16275, but only the 64-bit editions. It prevents certain software to install and use its otherwise perfectly fine kernel driver. The issue affects several software, not just AIDA64. We're already working on a workaround, but we also expect Microsoft to fix this up soon. I'll post a message into this topic once we have an update.
  3. 3 points
    After buying a new comp i was started with modding. More info - http://nl.hardware.i...irus_59-edition SilverStone Fortress FT03 Black + MIMO 720F Touchscreen USB Monitor (7" 800x480) He was supposed to be better than the old one. Lian Li PC-A05NBF Black + Alphacool LC-Display 240x128 I was looking for software to use the built-in monitor as my old Alphacool LC-Display. And I found AIDA64. The first attempt / v1 The second attempt / v2 - v2.sensorpanel The third attempt / v3. I use now v3 BW 128 v2 - v3.sensorpanel - v3 BW.sensorpanel - v3 BW 128.sensorpanel - v3 BW 128 v2.sensorpanel Possible future - v4.sensorpanel I can't upload anymore, the limit is reached Now I'm waiting for the appearance of the possibility to monitor hard drives and wireless signal strength.
  4. 2 points
    You're right, 16278 carries on the issue. We need to release one more AIDA64 hotfix to get around it again. We'll do that tomorrow or worse case Friday. I'll post a message into this topic once the new AIDA64 beta build is available for download.
  5. 2 points
    Got a bit carried away with XCOM2 and hunting down a (possible) memory issue...
  6. 2 points
    new set of gauges , If some like it, leave coment and i sent you on you email. I have for LCD and sensor panel in ( Large and medium sizes ) in png
  7. 2 points
    Some new gauges. LOAD and IDILE. If some like it, leave coment and i sent you on you email. I have for LCD and sensor panel in ( Large and medium sizes ) in png
  8. 2 points
    This is a real layout GA-Z77X-UD5H. Panel size 1000x792 GA-Z77X-UD5H.2015-11-20.sensorpanel I have layered .psd file.
  9. 2 points
    Thanks for the quick fix. All working fine now. Here is my custom panel. System Idle Example System Load Example Desktop Example If any one wants to use it you can download it from my blog - http://blog.psine.com/sensorpanel.html
  10. 2 points
    Hey guys, just thought you might like my Star Trek TNG sensor panel. I styled it like the control panels from The Next Generation. It's fully functional. I'm always tweaking though. It's a large size. 1024 x 972. I usually use it with 25% transparency on my 1600 x 900 desktop. I may do another design, just to switch up now and again.
  11. 1 point
    Hey, Would it possible to have a list like Task Manager does where the processes / applications that are using the CPU or network would come up. EDIT: On the LCD I mean. I ask for this as I find myself noting via AIDA64 on my LCD that the CPU might be at 20% and then I wonder what might be causing it so I open task manager to find out. It would be ideal if I could have a list like that on a different page on the LCD via AIDA64 so I could quickly check what was causing the spike. A similar idea for the network would be great like what's found in the "Processes with Network Activity" tab of the Resource Monitor. Many thanks.
  12. 1 point
    Thank you. We'll implement advanced support for your motherboard in the next AIDA64 beta update due in a few days from now. I'll post a message into this topic once the new AIDA64 beta build is available for download.
  13. 1 point
    It's best to try to run the FPU subtest alone first, for a few hours. If your system can stand that, then without stopping the test just enable all the others, and let it run for a few more hours. If no error message, no sudden system restart, power-off or lockup occurs, then your system is considered pretty stable
  14. 1 point
    On your particular video card those 2 values are measured using different methods, so you definitely shouldn't add those numbers up or combine them in any ways. AMD GPUs use quite a few secret tricks that are not documented well enough -- but AIDA64 uses those tricks to provide every possible measurements. Due to the lack of documentation though, it's hard for us to provide you with guidelines on how to interpret the readings.
  15. 1 point
    Thank you for your answer. I will not worry anymore about battery wear level
  16. 1 point
    Thank you both for your feedbacks
  17. 1 point
    Thank you! We'll add CPU Mesh and VCCIO voltage readings in the next AIDA64 beta update due next week. I'll post a message into this topic once the new beta becomes available for download.
  18. 1 point
    This can happen if SVID is disabled in BIOS - in such case CPU power monitoring cannot work. Please check the BIOS settings.
  19. 1 point
    I'm not sure if you need to be as drastic as to reinstall the whole OS. But, it should help if you could completely remove both video drivers, find the latest version of both, and reinstall them. As for OpenCL, after removing both video drivers and if there's a remaining OpenCL.dll file, that file too... It may help to remove the traces of OpenCL from the Registry, by removing the following Registry entries and its sub-entries: HKEY_LOCAL_MACHINE\SOFTWARE\Khronos\OpenCL HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Khronos\OpenCL
  20. 1 point
    Hi, i also downloaded this Beta Version you Suggested but it says that i dont have a licence for that version. My current Version 5.80.4000 doesn't support my 1080ti. Any help would be appreciated. Ah ok...i see now, support for my AIDA64 Ended on 11.12.2016 :(... Regards Simon
  21. 1 point
    Please note that in order to detect the missing details, the camera ID information had to be previously encoded into the Android profile of the device. When the manufacturer of the devcie (in your case Sony) didn't encode the info there, then sysinfo apps cannot read or detect it.
  22. 1 point
    You need Network Alerting to be notified by certain actions accomplished by your users, like installing a software or connecting a USB flash drive. You can configure Network Alerting in AIDA64 / main menu / File / Preferences / Network Alerting. Also, make sure to read the AIDA64 Business Setup Guide: https://www.aida64.co.uk/sites/default/files/public/download/documents/en/aida64business-setupguide.pdf And the AIDA64 Business User's Manual: https://www.aida64.co.uk/sites/default/files/public/download/documents/en/aida64business-manual.pdf Regards, Fiery
  23. 1 point
  24. 1 point
    Wow, there's just more and more to this proggy! Here is my first try... 2015-03-02.sensorpanel I too would like to see the sensorpanel file for luvsmobile. Here is my second try, yes i have too much time on my hands. ;-) Idle... Under Load, AIDA64 System Stability Test Stress CPU, FPU, and GPUs... 2015-03-04.sensorpanel After getting conflicting information on which sensor in AIDA64 represented the Intel Tcase temperature (Motherboard, CPU), I decided to treat core temp as the Tcase limit for safety.
  25. 1 point
    Thank you for the feedback, it sounds great!
×