Jump to content
AIDA64 Discussion Forum

Leaderboard


Popular Content

Showing content with the highest reputation since 12/05/18 in all areas

  1. 1 point
    Hi, Aida64 now provides support for the Odospace Remote Panel app: Reuse your old android device to display sensor values of a Windows PC. A WiFi connection is not (!) required, Remote Panel works even when the device is connected to the PC via USB only. However, an SDK for Remote Panel is provided also. Sensor values are provided by the industry-leading system information tool Aida64 which must be purchased separately. Please note that Remote Panel is not affiliated with Aida64 or FinalWire in any way shape or form and no support can be provided by the Aida64 team for this app. Requirements - Aida64 version 5.20.3414 or heigher must be installed on the Windows PC. - Remote Panel (for Windows) version 1.16 must be installed and running, it can be downloaded with the following link http://apps.odospace.com/RemotePanelSetup.exe - Microsoft .Net framework 4.5 must be installed on the Windows PC. This will be done during the installation of Remote Panel (for Windows). - The android device vendor's drivers must be installed on the Windows PC. - USB debugging must be enabled on the android device. This is described in detail here. Enable Aiada64 plugIn - After installation of Remote Panel (for Windows) Aida64 must be restarted. - Within Aida64 open the preferences page, navigate to LCD and enable "Odospace". Add items within the LCD items page. Settings - A long press within the view opens the settings dialog. Troubleshooting - In general the settings dialog of Remote Panel (for Windows) can be opened from the popup menu of its tray icon. - Remote Panel (for Windows) uses port 38000 and 38001 for local communication, if you experience problems because another PC program is using one of this ports, change the port number within the Remote Panel (for Windows) settings dialog and within the Aida64 Odospace LCD plugin. - Remote Panel (for Windows) uses the Android Debug Bridge (adb.exe) for communication. If you experience problems with other Android synchronization programs, try to use another adb.exe file - it can be changed within the settings dialog of Remote Panel (for Windows). - On default, Remote Panel (for Windows) checks every 30 seconds for new devices, decrease this value within the settings for faster device recognition, increase this value for less CPU usage. Alternative usage - If an additional PC should send its sensor values to the android device, set the IP address within the Aida64 Odospace LCD plugin to the address of the PC where the android device is connected. For every PC specify a different panel position parameter. Remote Panel (for Windows) must be installed on every PC, however the Remote Panel (for Windows) executable must only be started on the PC where the Android device is connected. - Remote Panel can be used within a WiFi network also, in such case set the IP address within the Aida64 Odospace PlugIn to the device's address. The port must be set to 38000. The Remote Panel (for Windows) executable can be stopped in this case. Advanced topics - To automatically start Remote Panel you can use AutoStart. - To power off the device on PC shut down you can use AutomateIt Pro - use the USB disconnect trigger. - If the device battery discharge even connected via USB, try to set the CPU speed to a lower level. For example you can use Tickster MOD. - To power on the device on PC startup the device firmware must be modified (follow this AT YOUR OWN RISK, tested with Cyanogenmod 10.2 on LG P760/P880 and may not work with all devices): General 1. Download the device firmware - it can be the original or custom ROM. 2. Use Boot/Recovery Repacker to extract the boot.img file of the downloaded ROM. 3. Within the file init.rc, in the section beginning with "on charger" replace the string "class_start charger" with "trigger boot" or "trigger late-init". Ensure that your editor writes the file in UNIX format. 4. Use the repacker to compress the boot.img file. 5. Apply the new firmware. Nexus 7 (2012) 1. Boot in fastboot mode 2. Issue the following command within a command prompt: "fastboot oem off-mode-charge 0" Version 1.14 - Now sensor data of multiple PCs can be displayed on one android device - The android device can be connected to any PC (not only to the PC where Aida64 is running) - Requires Aida version 5.20.3414 or higher and Remote Panel (for Windows) version 1.14a Version 1.15 - Fullscreen mode (long press for settings) - RemotePanel (for windows) version 1.15: Verbose mode for better problem handling, fixes a rare ADB hang when multiple PCs are connected to one android device. Version 1.16 available - New option added: Keep screen on (long press for settings) Many thanks to the Aida64 team for the great support! Best regards odospace
  2. 1 point
    First of all, make sure to upgrade to the latest beta version of AIDA64 Extreme available at: https://www.aida64.com/downloads/latesta64xebeta After upgrading to this new version, make sure to restart Windows to finalize the upgrade. That should help about issue #1 and #2. If not, then please let me know where exactly are all your fans connected to (motherboard or water cooler/coolers), and whether the motherboard connected fans are "iffy" or the ones connected to your water cooler/coolers. As for #3, as you can see on the AIDA64 OSD Panel shots, there're quite a few thermal readings available for your CPU, namely "CPU", "CPU Package" and 4 core temperatures. iCUE could indicate any of those as CPU temperature, or it could simply show the liquid temperature of your water cooler as CPU temperature.
  3. 1 point
    I'm not sure how to talk to that mouse, but we've ordered one and we'll try to figure it out I'll let you know in this topic once we have a new AIDA64 beta build for you to check out.
  4. 1 point
    Along with the Logitech Arx integration, we've also come up with a new LCD module that basically acts as a web server. You can use your main computer to run AIDA64 on it and maintain its built-in web server, and you can use your other computers or mobile devices to monitor your main computer's status remotely, using nothing but a web browser. You can activate it in AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD / RemoteSensor. Once you activated it, you can enter the IP address in virtually any web browsers to connect to the RemoteSensor. You can check the primary IP address of your computer on the Computer / Summary page in AIDA64. If it is e.g. 192.168.1.123, then enter the following in the address bar of your web browser: http://192.168.1.123 Or, in case you use a different TCP/IP port than the default http port of 80, then enter the address like this: http://192.168.1.123:8080 (if you use a TCP/IP port of 8080) Or, in case you try to use a web browser on the same computer where AIDA64 is running, you can simply use "localhost" instead of the IP address, like this: http://localhost Once you did that, you should see the AIDA64 splash screen in your web browser. It will provide you with information on the resolution that you need to use to get the most out of the LCD layout designer. On iOS devices the default setting should be close to the actual value to use, while on Android and other devices it may not match at all, so you need to change both the width and height. Please note that the Preview Resolution usually will not match the native screen resolution of your device. It's not a problem at all, and that discrepancy is due to the way web browsers manage the pixels of your screen, so don't be surprised that e.g. an iPhone 5 would report a Preview Resolution of 980 x 1360 pixels After the Preview Resolution is updated on the AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD page, you can use the same LCD layout designer that you would use for other LCD devices or the SensorPanel. Known issues and limitations: 1) Graphs and gauges are not implemented yet. We're planning to add them in the next few weeks. 2) RemoteSensor uses HTML5 SSE (Server-Sent Events) to refresh the web page, without having to reload it all the time. SSE is supported by almost all major web browsers, including Android Browser, BlackBerry 10 Browser, Chrome, FireFox, Opera, and Safari. However, it is sadly not yet supported by Internet Explorer. AIDA64 implements a trick to get around that limitation, but it sometimes will result in a mixup of the browser. If you notice that after changing the LCD layout in the AIDA64 Preferences, a strange log replaces the LCD layout in your browser, just refresh the web page. Hopefully Microsoft will finally implement SSE support in Internet Explorer 12 3) In order to prevent your mobile device from going to sleep while having the web browser open, you may need to install special apps on your mobile device. RemoteSensor has absolutely no control over the power management behavior of your mobile device. In case this is a deal breaker for you, and you've got a Logitech Gaming hardware, consider using Logitech Arx instead of the RemoteSensor. You can try the RemoteSensor in the following new AIDA64 beta update: http://www.aida64.com/downloads/latesta64xebeta Please let us know how it works on your mobile devices Thanks, Fiery
  5. 1 point
    That RGB fusion issue is fixed already, and the fix is inherited by the newer and newer beta updates, as well as the stable updates in the future.
  6. 1 point
    Special thanks to Novax as this entire Sensor Panel is a copy of his wonderful work. Thank you again for your creativity and generosity. HellKatDash02_08_2019.sensorpanel
  7. 1 point
    Bars can be rotated by specifying a width that is smaller than the height
  8. 1 point
    Yes. Upgrading to a new beta is as simple as that. You can let it overwrite any existing files. It will retain your existing settings (it won't overwrite or remove AIDA64.INI file) as well as your existing license.
  9. 1 point
    nuevo panel que estoy terminando este diseño no tiene nada que ver con los gauges les dejo unos gauges por si los quieren utilizar en el archivo rar. Gauge.7z
  10. 1 point
    Final built in red orange 4 ORANGE Red.splcd.axlcd
  11. 1 point
    same panel but black, white and red for samsung spf 800x480 BlackWhite 2019-01-20.splcd.axlcd
  12. 1 point
  13. 1 point
    Thank you! We've fixed the voltage readings in the latest AIDA64 beta build available at: https://www.aida64.com/downloads/latesta64xebeta
  14. 1 point
  15. 1 point
    aquí la descarga espero les guste dejo imagen i el PSD
  16. 1 point
    I don't think your motherboard is capable of monitoring VRM temperature. We'll add the missing fan readings in the next AIDA64 beta update. I'll drop a message into this topic once the new AIDA64 beta is available for download.
  17. 1 point
    There must be something wrong about the OpenCL software stack. Try to uninstall and reinstall ForceWare.
  18. 1 point
    Decided to try and work on one of these doodads... Really schocked, got it done in like 5 hours. CHEERS I built it basically looking at the work from the samples shown on here by a couple of users.
  19. 1 point
    New Text Version, uses on Desktop > text_v2.sensorpanel Adapted to 5 Inch Dispaly with 800x480 Pixels > PiDisplay.sensorpanel PiDisplay.sensorpanel text_v2.sensorpanel
  20. 1 point
    Hello I have a problem with rams, they are indicated as on the screen in Aida64, while it will have to be A1, B1, C1, D1 and I have the temperature of the water plugged into the "Water In" port on the motherboard, but it indicates Temperature N°1 in Aida64 It is possible to rename in "Water" (the "In" and "Out" to put in Extended Labels) and it's "duplicate" with T-Sensor 1 Asus having made the effort to add these ports, as long as they are named correctly in Aida64 And for Water Flow, in bios it is indicated in l/m, in Aida64 it is indicated in RPM Possible to have in l/m (see in l/h) in Aida64 Thanks And merry christmas
  21. 1 point
    Ok cool I'll see what I can come up with for ya we can fine tune it later on ...
  22. 1 point
    I would like to know how to turn on a second unique Sensor Panel. I figure it must be possible as @Fiery said in 2013... "We do have plans about multiple SensorPanels,"
  23. 1 point
    My Custom sensor panel, in the style of Asus' AI suite. It's 800 x 460 as this will be displayed on an in-case LCD-screen. The dials on top are dynamic, as well as the animated fan icons. I'm quite pleased with it. In case anyone's interested, I'll post a picture with the final result!
  24. 1 point
    After buying a new comp i was started with modding. More info - http://nl.hardware.i...irus_59-edition SilverStone Fortress FT03 Black + MIMO 720F Touchscreen USB Monitor (7" 800x480) He was supposed to be better than the old one. Lian Li PC-A05NBF Black + Alphacool LC-Display 240x128 I was looking for software to use the built-in monitor as my old Alphacool LC-Display. And I found AIDA64. The first attempt / v1 The second attempt / v2 - v2.sensorpanel The third attempt / v3. I use now v3 BW 128 v2 - v3.sensorpanel - v3 BW.sensorpanel - v3 BW 128.sensorpanel - v3 BW 128 v2.sensorpanel Possible future - v4.sensorpanel I can't upload anymore, the limit is reached Now I'm waiting for the appearance of the possibility to monitor hard drives and wireless signal strength.
  25. 0 points
    Sadly, it's correct and it's still valid with the latest iCUE version. All you Corsair hardware owners out there: you need to put more pressure on Corsair to get their act together and make it possible for other applications to access Corsair hardware while iCUE is also running in the background. It was possible with an older version of Corsair Link Software, but Corsair decided to discontinue supporting 3rd party application developers
×