Jump to content
AIDA64 Discussion Forum


Popular Content

Showing content with the highest reputation since 12/16/18 in all areas

  1. 1 point
  2. 1 point
    Hi, Aida64 now provides support for the Odospace Remote Panel app: Reuse your old android device to display sensor values of a Windows PC. A WiFi connection is not (!) required, Remote Panel works even when the device is connected to the PC via USB only. However, an SDK for Remote Panel is provided also. Sensor values are provided by the industry-leading system information tool Aida64 which must be purchased separately. Please note that Remote Panel is not affiliated with Aida64 or FinalWire in any way shape or form and no support can be provided by the Aida64 team for this app. Requirements - Aida64 version 5.20.3414 or heigher must be installed on the Windows PC. - Remote Panel (for Windows) version 1.16 must be installed and running, it can be downloaded with the following link http://apps.odospace.com/RemotePanelSetup.exe - Microsoft .Net framework 4.5 must be installed on the Windows PC. This will be done during the installation of Remote Panel (for Windows). - The android device vendor's drivers must be installed on the Windows PC. - USB debugging must be enabled on the android device. This is described in detail here. Enable Aiada64 plugIn - After installation of Remote Panel (for Windows) Aida64 must be restarted. - Within Aida64 open the preferences page, navigate to LCD and enable "Odospace". Add items within the LCD items page. Settings - A long press within the view opens the settings dialog. Troubleshooting - In general the settings dialog of Remote Panel (for Windows) can be opened from the popup menu of its tray icon. - Remote Panel (for Windows) uses port 38000 and 38001 for local communication, if you experience problems because another PC program is using one of this ports, change the port number within the Remote Panel (for Windows) settings dialog and within the Aida64 Odospace LCD plugin. - Remote Panel (for Windows) uses the Android Debug Bridge (adb.exe) for communication. If you experience problems with other Android synchronization programs, try to use another adb.exe file - it can be changed within the settings dialog of Remote Panel (for Windows). - On default, Remote Panel (for Windows) checks every 30 seconds for new devices, decrease this value within the settings for faster device recognition, increase this value for less CPU usage. Alternative usage - If an additional PC should send its sensor values to the android device, set the IP address within the Aida64 Odospace LCD plugin to the address of the PC where the android device is connected. For every PC specify a different panel position parameter. Remote Panel (for Windows) must be installed on every PC, however the Remote Panel (for Windows) executable must only be started on the PC where the Android device is connected. - Remote Panel can be used within a WiFi network also, in such case set the IP address within the Aida64 Odospace PlugIn to the device's address. The port must be set to 38000. The Remote Panel (for Windows) executable can be stopped in this case. Advanced topics - To automatically start Remote Panel you can use AutoStart. - To power off the device on PC shut down you can use AutomateIt Pro - use the USB disconnect trigger. - If the device battery discharge even connected via USB, try to set the CPU speed to a lower level. For example you can use Tickster MOD. - To power on the device on PC startup the device firmware must be modified (follow this AT YOUR OWN RISK, tested with Cyanogenmod 10.2 on LG P760/P880 and may not work with all devices): General 1. Download the device firmware - it can be the original or custom ROM. 2. Use Boot/Recovery Repacker to extract the boot.img file of the downloaded ROM. 3. Within the file init.rc, in the section beginning with "on charger" replace the string "class_start charger" with "trigger boot" or "trigger late-init". Ensure that your editor writes the file in UNIX format. 4. Use the repacker to compress the boot.img file. 5. Apply the new firmware. Nexus 7 (2012) 1. Boot in fastboot mode 2. Issue the following command within a command prompt: "fastboot oem off-mode-charge 0" Version 1.14 - Now sensor data of multiple PCs can be displayed on one android device - The android device can be connected to any PC (not only to the PC where Aida64 is running) - Requires Aida version 5.20.3414 or higher and Remote Panel (for Windows) version 1.14a Version 1.15 - Fullscreen mode (long press for settings) - RemotePanel (for windows) version 1.15: Verbose mode for better problem handling, fixes a rare ADB hang when multiple PCs are connected to one android device. Version 1.16 available - New option added: Keep screen on (long press for settings) Many thanks to the Aida64 team for the great support! Best regards odospace
  3. 1 point
    Along with the Logitech Arx integration, we've also come up with a new LCD module that basically acts as a web server. You can use your main computer to run AIDA64 on it and maintain its built-in web server, and you can use your other computers or mobile devices to monitor your main computer's status remotely, using nothing but a web browser. You can activate it in AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD / RemoteSensor. Once you activated it, you can enter the IP address in virtually any web browsers to connect to the RemoteSensor. You can check the primary IP address of your computer on the Computer / Summary page in AIDA64. If it is e.g., then enter the following in the address bar of your web browser: Or, in case you use a different TCP/IP port than the default http port of 80, then enter the address like this: (if you use a TCP/IP port of 8080) Or, in case you try to use a web browser on the same computer where AIDA64 is running, you can simply use "localhost" instead of the IP address, like this: http://localhost Once you did that, you should see the AIDA64 splash screen in your web browser. It will provide you with information on the resolution that you need to use to get the most out of the LCD layout designer. On iOS devices the default setting should be close to the actual value to use, while on Android and other devices it may not match at all, so you need to change both the width and height. Please note that the Preview Resolution usually will not match the native screen resolution of your device. It's not a problem at all, and that discrepancy is due to the way web browsers manage the pixels of your screen, so don't be surprised that e.g. an iPhone 5 would report a Preview Resolution of 980 x 1360 pixels After the Preview Resolution is updated on the AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD page, you can use the same LCD layout designer that you would use for other LCD devices or the SensorPanel. Known issues and limitations: 1) Graphs and gauges are not implemented yet. We're planning to add them in the next few weeks. 2) RemoteSensor uses HTML5 SSE (Server-Sent Events) to refresh the web page, without having to reload it all the time. SSE is supported by almost all major web browsers, including Android Browser, BlackBerry 10 Browser, Chrome, FireFox, Opera, and Safari. However, it is sadly not yet supported by Internet Explorer. AIDA64 implements a trick to get around that limitation, but it sometimes will result in a mixup of the browser. If you notice that after changing the LCD layout in the AIDA64 Preferences, a strange log replaces the LCD layout in your browser, just refresh the web page. Hopefully Microsoft will finally implement SSE support in Internet Explorer 12 3) In order to prevent your mobile device from going to sleep while having the web browser open, you may need to install special apps on your mobile device. RemoteSensor has absolutely no control over the power management behavior of your mobile device. In case this is a deal breaker for you, and you've got a Logitech Gaming hardware, consider using Logitech Arx instead of the RemoteSensor. You can try the RemoteSensor in the following new AIDA64 beta update: http://www.aida64.com/downloads/latesta64xebeta Please let us know how it works on your mobile devices Thanks, Fiery
  4. 1 point
    aquí la descarga espero les guste dejo imagen i el PSD
  5. 1 point
    New Text Version, uses on Desktop > text_v2.sensorpanel Adapted to 5 Inch Dispaly with 800x480 Pixels > PiDisplay.sensorpanel PiDisplay.sensorpanel text_v2.sensorpanel