Jump to content
AIDA64 Discussion Forum

Leaderboard


Popular Content

Showing content with the highest reputation since 05/27/18 in all areas

  1. 2 points
    Thank you. Here's the fix for your motherboard as well as other motherboards that are affected by the same anomaly. https://www.aida64.com/downloads/latesta64xebeta
  2. 2 points
    New Text Version, uses on Desktop > text_v2.sensorpanel Adapted to 5 Inch Dispaly with 800x480 Pixels > PiDisplay.sensorpanel PiDisplay.sensorpanel text_v2.sensorpanel
  3. 2 points
    After buying a new comp i was started with modding. More info - http://nl.hardware.i...irus_59-edition SilverStone Fortress FT03 Black + MIMO 720F Touchscreen USB Monitor (7" 800x480) He was supposed to be better than the old one. Lian Li PC-A05NBF Black + Alphacool LC-Display 240x128 I was looking for software to use the built-in monitor as my old Alphacool LC-Display. And I found AIDA64. The first attempt / v1 The second attempt / v2 - v2.sensorpanel The third attempt / v3. I use now v3 BW 128 v2 - v3.sensorpanel - v3 BW.sensorpanel - v3 BW 128.sensorpanel - v3 BW 128 v2.sensorpanel Possible future - v4.sensorpanel I can't upload anymore, the limit is reached Now I'm waiting for the appearance of the possibility to monitor hard drives and wireless signal strength.
  4. 1 point
    Hi, Aida64 now provides support for the Odospace Remote Panel app: Reuse your old android device to display sensor values of a Windows PC. A WiFi connection is not (!) required, Remote Panel works even when the device is connected to the PC via USB only. However, an SDK for Remote Panel is provided also. Sensor values are provided by the industry-leading system information tool Aida64 which must be purchased separately. Please note that Remote Panel is not affiliated with Aida64 or FinalWire in any way shape or form and no support can be provided by the Aida64 team for this app. Requirements - Aida64 version 5.20.3414 or heigher must be installed on the Windows PC. - Remote Panel (for Windows) version 1.16 must be installed and running, it can be downloaded with the following link http://apps.odospace.com/RemotePanelSetup.exe - Microsoft .Net framework 4.5 must be installed on the Windows PC. This will be done during the installation of Remote Panel (for Windows). - The android device vendor's drivers must be installed on the Windows PC. - USB debugging must be enabled on the android device. This is described in detail here. Enable Aiada64 plugIn - After installation of Remote Panel (for Windows) Aida64 must be restarted. - Within Aida64 open the preferences page, navigate to LCD and enable "Odospace". Add items within the LCD items page. Settings - A long press within the view opens the settings dialog. Troubleshooting - In general the settings dialog of Remote Panel (for Windows) can be opened from the popup menu of its tray icon. - Remote Panel (for Windows) uses port 38000 and 38001 for local communication, if you experience problems because another PC program is using one of this ports, change the port number within the Remote Panel (for Windows) settings dialog and within the Aida64 Odospace LCD plugin. - Remote Panel (for Windows) uses the Android Debug Bridge (adb.exe) for communication. If you experience problems with other Android synchronization programs, try to use another adb.exe file - it can be changed within the settings dialog of Remote Panel (for Windows). - On default, Remote Panel (for Windows) checks every 30 seconds for new devices, decrease this value within the settings for faster device recognition, increase this value for less CPU usage. Alternative usage - If an additional PC should send its sensor values to the android device, set the IP address within the Aida64 Odospace LCD plugin to the address of the PC where the android device is connected. For every PC specify a different panel position parameter. Remote Panel (for Windows) must be installed on every PC, however the Remote Panel (for Windows) executable must only be started on the PC where the Android device is connected. - Remote Panel can be used within a WiFi network also, in such case set the IP address within the Aida64 Odospace PlugIn to the device's address. The port must be set to 38000. The Remote Panel (for Windows) executable can be stopped in this case. Advanced topics - To automatically start Remote Panel you can use AutoStart. - To power off the device on PC shut down you can use AutomateIt Pro - use the USB disconnect trigger. - If the device battery discharge even connected via USB, try to set the CPU speed to a lower level. For example you can use Tickster MOD. - To power on the device on PC startup the device firmware must be modified (follow this AT YOUR OWN RISK, tested with Cyanogenmod 10.2 on LG P760/P880 and may not work with all devices): General 1. Download the device firmware - it can be the original or custom ROM. 2. Use Boot/Recovery Repacker to extract the boot.img file of the downloaded ROM. 3. Within the file init.rc, in the section beginning with "on charger" replace the string "class_start charger" with "trigger boot" or "trigger late-init". Ensure that your editor writes the file in UNIX format. 4. Use the repacker to compress the boot.img file. 5. Apply the new firmware. Nexus 7 (2012) 1. Boot in fastboot mode 2. Issue the following command within a command prompt: "fastboot oem off-mode-charge 0" Version 1.14 - Now sensor data of multiple PCs can be displayed on one android device - The android device can be connected to any PC (not only to the PC where Aida64 is running) - Requires Aida version 5.20.3414 or higher and Remote Panel (for Windows) version 1.14a Version 1.15 - Fullscreen mode (long press for settings) - RemotePanel (for windows) version 1.15: Verbose mode for better problem handling, fixes a rare ADB hang when multiple PCs are connected to one android device. Version 1.16 available - New option added: Keep screen on (long press for settings) Many thanks to the Aida64 team for the great support! Best regards odospace
  5. 1 point
    Along with the Logitech Arx integration, we've also come up with a new LCD module that basically acts as a web server. You can use your main computer to run AIDA64 on it and maintain its built-in web server, and you can use your other computers or mobile devices to monitor your main computer's status remotely, using nothing but a web browser. You can activate it in AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD / RemoteSensor. Once you activated it, you can enter the IP address in virtually any web browsers to connect to the RemoteSensor. You can check the primary IP address of your computer on the Computer / Summary page in AIDA64. If it is e.g. 192.168.1.123, then enter the following in the address bar of your web browser: http://192.168.1.123 Or, in case you use a different TCP/IP port than the default http port of 80, then enter the address like this: http://192.168.1.123:8080 (if you use a TCP/IP port of 8080) Or, in case you try to use a web browser on the same computer where AIDA64 is running, you can simply use "localhost" instead of the IP address, like this: http://localhost Once you did that, you should see the AIDA64 splash screen in your web browser. It will provide you with information on the resolution that you need to use to get the most out of the LCD layout designer. On iOS devices the default setting should be close to the actual value to use, while on Android and other devices it may not match at all, so you need to change both the width and height. Please note that the Preview Resolution usually will not match the native screen resolution of your device. It's not a problem at all, and that discrepancy is due to the way web browsers manage the pixels of your screen, so don't be surprised that e.g. an iPhone 5 would report a Preview Resolution of 980 x 1360 pixels After the Preview Resolution is updated on the AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD page, you can use the same LCD layout designer that you would use for other LCD devices or the SensorPanel. Known issues and limitations: 1) Graphs and gauges are not implemented yet. We're planning to add them in the next few weeks. 2) RemoteSensor uses HTML5 SSE (Server-Sent Events) to refresh the web page, without having to reload it all the time. SSE is supported by almost all major web browsers, including Android Browser, BlackBerry 10 Browser, Chrome, FireFox, Opera, and Safari. However, it is sadly not yet supported by Internet Explorer. AIDA64 implements a trick to get around that limitation, but it sometimes will result in a mixup of the browser. If you notice that after changing the LCD layout in the AIDA64 Preferences, a strange log replaces the LCD layout in your browser, just refresh the web page. Hopefully Microsoft will finally implement SSE support in Internet Explorer 12 3) In order to prevent your mobile device from going to sleep while having the web browser open, you may need to install special apps on your mobile device. RemoteSensor has absolutely no control over the power management behavior of your mobile device. In case this is a deal breaker for you, and you've got a Logitech Gaming hardware, consider using Logitech Arx instead of the RemoteSensor. You can try the RemoteSensor in the following new AIDA64 beta update: http://www.aida64.com/downloads/latesta64xebeta Please let us know how it works on your mobile devices Thanks, Fiery
  6. 1 point
    Hey, Would it possible to have a list like Task Manager does where the processes / applications that are using the CPU or network would come up. EDIT: On the LCD I mean. I ask for this as I find myself noting via AIDA64 on my LCD that the CPU might be at 20% and then I wonder what might be causing it so I open task manager to find out. It would be ideal if I could have a list like that on a different page on the LCD via AIDA64 so I could quickly check what was causing the spike. A similar idea for the network would be great like what's found in the "Processes with Network Activity" tab of the Resource Monitor. Many thanks.
  7. 1 point
    Hi, UBports https://ubports.com/ is maintaining and developing the Ubuntu touch os, and there is a strong community starting around it, a lot of developers and porters interested in system info have asked about the availability of your program after Canonicals app store has shut down. The new app store is here: https://open.uappexplorer.com/ If possible could you make the click package available to the open store, or even here on the forum?
  8. 1 point
    I heard that Huawei MediaPad M5 Android Tablet is on back to school promotion now, M510.8'',M5 8.4'' &M5 Pro10.8"" all will cut price.
  9. 1 point
    Android:I recommend huawei M5. I watched a 45-minute Netflix show (downloaded, offline) the other day and had 98% battery left! Streaming video takes a bigger toll on the tablet but was still a high performer! My past experience: Samsung Tab S2, Nexus 7, Apple Mini 2. I did not like the mini because my favorite browser would not word wrap. 1) Speed. M5 is faster than Tab S2 but both are adequate. Nexus 7 is as smooth but much slower. Still useable. 2) Touch screen sensitivity. All three are good with finger touch but Nexus 7 is unuseable with stylus. Tab S2 is perfect with stylus, M5 close behind. M5 Keyboard touch is equal to Tab S2 but for some reason smaller icons such as home screen, back, and even some (closing) x require slight technique some times. 3) Screen. M5 is best, but all three are hi-res and adequate. Anything with 800 in the screen description is inadequate. 4) Sound. This has four components. Adequate internal and blue tooth volume, internal sound quality, and blue tooth sound quality. The Tab S2 doth truely suck in all three. The most irritating thing is none of the PlayStore volume boosters work with S2. ( Sound boosters are needed for some youtube and other presentations that are badly sound engineered.) The sound booster I use works both on the Nexus 7 and M5. The Nexus 7 has the best blue tooth fidelity and M2 is about the same while the S2 a cut below "the best". The M5, however has by far the best internal sound. Recently I have not even bothered to use my nifty blue tooth speaker for audio books on M5. 5) Automatic screen orientation. The M5 does not have 360 orientation. It only rotates 180 degrees. This is a bigger deal than you might think. Speciffically, I can not use the M5 in portrait mode while charging the battery because my favorite (high quality leather) carrying case charging port is on the bottom! 6) Screen proportions. Both the Nexus 7 and M5 have wide screens versus the S2 that has the apple squarish screen. In all honesty, I expected to always prefer the wide screen but I don't. You may have a preference. Summary. If I could only have one tablet I would choose the M5 entirely for its all around sound management. Probably I will still use the Nexus 7 for audio books on blue tooth because it is so small and handy.
  10. 1 point
    How much will it cut ?I want to buy one ,is it on Amazon ?or ?
  11. 1 point
  12. 1 point
    Hello Here is my panel of ROG control for my second screen 1920x1080. I realized with photoshop at 80% There are some changes to make. Image 1 is without photoshop Image 2 with photoshop Sorry for my english I am french.
  13. 1 point
    The remote features of AIDA64 Business are not limited to LAN at all. You can use any kind of connection as long as it's based on the TCP/IP protocol.
  14. 1 point
    We believe we've found the root cause of the issues concerning Windows 10 April 2018 Update (Version 1803 / Build 17134) based systems. The timer that AIDA64 uses for BCLK measurement is also used by a new Win10 component. Most likely that component is used for GPU profiling. And when AIDA64 and Win10 both use the timer for their own purposes in the same time, the system could become unstable. We've had to disable polling for BCLK, so from now on AIDA64 will only measure BCLK once, and then use the last value until AIDA64 gets restarted. Here's the new AIDA64 beta build that includes the workaround: https://www.aida64.com/downloads/latesta64xebeta
  15. 1 point
    We believe we've found the root cause of the issues concerning Windows 10 April 2018 Update (Version 1803 / Build 17134) based systems. The timer that AIDA64 uses for BCLK measurement is also used by a new Win10 component. Most likely that component is used for GPU profiling. And when AIDA64 and Win10 both use the timer for their own purposes in the same time, the system could become unstable. We've had to disable polling for BCLK, so from now on AIDA64 will only measure BCLK once, and then use the last value until AIDA64 gets restarted. Here's the new AIDA64 beta build that includes the workaround: https://www.aida64.com/downloads/latesta64xebeta
  16. 1 point
    You can adjust sensor readings in AIDA64 / main menu / File / Preferences / Hardware Monitoring / Correction.
  17. 1 point
  18. 1 point
    nice gauge! Is better if color of indicator is red or orange... what kind of fonts are you using?
  19. 1 point
    Ok cool I'll see what I can come up with for ya we can fine tune it later on ...
  20. 1 point
  21. 1 point
    I think I'm getting the hang of this ... Here is a picture of my panel for my 800 x 480 LCD. Let me know what you think cus I made a few items. This is my second go at this and I'm waiting on some case fans right now so the side panel fan display is not hooked up yet below are samples of some medium gauges I made (for black background), if you like them email me for the files I don't mind sharing, I also make cool 800 x 480 backgrounds too 2 versions of a fan I'm working on right now.....
  22. 1 point
    I would like to know how to turn on a second unique Sensor Panel. I figure it must be possible as @Fiery said in 2013... "We do have plans about multiple SensorPanels,"
  23. 1 point
    My Custom sensor panel, in the style of Asus' AI suite. It's 800 x 460 as this will be displayed on an in-case LCD-screen. The dials on top are dynamic, as well as the animated fan icons. I'm quite pleased with it. In case anyone's interested, I'll post a picture with the final result!
  24. 1 point
    This is a real layout GA-Z77X-UD5H. Panel size 1000x792 GA-Z77X-UD5H.2015-11-20.sensorpanel I have layered .psd file.
  25. 1 point
    So I noticed you've change the name of the product. No notification was given (so there was no free upgrade path due to no way of knowing about the "free conversion campaign") and I've still got over a year left on the license due to the campaign you ran last year. So much for that.... I can't say I'm very pleased however due to the above. Everest was a good product, but if the company starts pulling fast ones (as it seems to me) then I guess I'm better without. I guess I have to swallow my loss (upgrades to the product) and move on. -- Trust isn't easily gained, but it is easily lost.
×