Jump to content

ANUBIS

Members
  • Posts

    159
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by ANUBIS

  1. Yep - it was Asus AI Suite 3. After i disabled it from startup, RAM temperature reading seemed to stabilize.

    In the past there were no such problems with AI Suite's older version. (AI Suite II)

    I replaced motherboard and now i am using newer AI Suite as well - can it be that it is using resources differently than previous versions ? Or is it the motherboard ?

    Old motherboard was Asus Sabertooth Z77 (with Ai Suite II),  new motherboard is Asus Z270 Mark 1 (with Ai Suite III).  So there must be some weird difference that makes reading RAM temperature difficult. Can this be resolved by changing the way Aida64 pulls this information from this kind of board, or is it advisable to not use AI suite ?

     

  2. Ok, i hope that one day i can see my M.2 status too.

    One more thing i forgot to mention -  my RAM temperature reading is fluctuating sometimes. It shows different degrees: 216, 124, 43, N/A, 149, 34, 114, N/A, 3, 51, and so on ... It can happen in less than a minute, reading changes every two seconds sometimes.  And sometimes it is stable for hours. I tried to disable Corsair Link, but that did not make any difference. I checked with a thermal camera and temperature seemed to be ok, it's the reading that is not ok. I do not overclock, but i use XMP profile.

    (RAM is Corsair Vengeance LED DDR4 3466 MHz)

  3. Yeah, i searched for firmware update but only thing that is available to download for this particular SSD, is Corsair Toolbox - and there is absolutely nothing that this toolbox can do for this drive. No Trim, no firmware update, not even S.M.A.R.T. information - uninstalled that useless program. So i guess i just have to wait and hope that my SSD wont burn.

    By the way - there is info on their website that says about this SSD: "Operating Temperature: 0°C to +65°C"  - Could not figure out what they mean by this: is this the temperature of the environment, where this SSD can work or is this the allowed internal temperature of the SSD ?  Their support is very slow.......:mellow:

     

  4. Hi !

    Recently i upgraded my system  - new motherboard, CPU, RAM and M.2 SSD

    After the upgrade I noticed few things:

    1.) No more VRM 1 and VRM 2 temperatures - Where are they ?

    2.) New temperature readings: "PCI-E #1", "PCI-E #2", "Temperature #1" and "Temperature #2"   What are these ?

    3.) My M.2 SSD (Corsair MP500 120GB) temperature reads 63-65 degrees celsius. Is that normal ?

     

     

     

     

  5. Ok, thanks for explaining.

    There is another thing - Aida64 reports two different temperature readings from my PSU (RM1000i) According to manufacturer there should be only one temperature sensor - Corsair Link also shows one temperature. What are the two temperatures, and which one is the right one ?

    (Power Supply #1, Power Suply #2)

  6. Hmm, so it is not the power that PSU draws from the wall.

    Corsair Link shows two different powers - incoming (draw from outlet) and outgoing (what computer is using) and difference between these two (efficiency). 

    Can you make Aida64 do the same ?

  7. Hi !

    I have Corsair RM1000i PSU with Corsair Link 4 software. And i can not use this software with Aida64 - it crashes when Aida64 is running. I tried the latest beta but still problem. (i have Corsair Link sensor support option checked) On the bright side - i can see various readings from my PSU with Aida64. It's just the software itself that crash with Aida64. Can i do something about it ?

  8. Oh - what about the thing i mentioned earlier - about creating some dummy .exe files that could activate different profiles ? (link those files to different states of gauges)

    It would be like different png images for gauges, only not images but .exe files (1.exe; 2.exe; 3exe and so on.)

    Those .exe files should not do anything, they can be "empty". Synapse software can react to them and activate profiles then.

     

    Basically: If you could create sixteen .exe files and give Aida64 ability to choose them for custom gauge.

    For now ther can be png files for gauges custom images, but in future there could be png and exe files to choose from. (and maybe some sort of audio file too - mp3 or something - for verbal messages)

    (This could also create possibility to link in some program - for example when gauge reaches to top, then some preselected action happens - very many possibilities)

  9. Yep, confirmed: after i uninstalled Asmedia SATA Controller drivers, (and any other storage drivers) that are newest on Asus support page for my motherboard, and let windows find drivers for my HDDs, i can now untick "enable RAID SMART support" and all my temperatures are still showing.

     

    -Just for information if anyone encounters something similar.- :)

  10. Sorry for delay, i did not check this topic for a while...  I am not very familiar with SwitchBlade UI SDK, but one thing that comes to mind is that maybe it is somehow possible to link some sensor readings to certain Razer Synapse profile(s) ?

    Like for example when GPU temp. reaches 70 C, profile with red backlight activates, and after temp. lowers below 70 C, previous (or whatever designated) profile activates.

    For now - what activates different profiles are executable files, so what could be done is add some scripts to Aida64 that activate some dummy exe files on certain occasions. Or maybe profiles can be forced to activate with png images and link to gauges (different gauges images activate different profiles)

    Or create some script that simulates pushing certain (changeable) button on certain occasion. (In Synapse, buttons can be designated to activate different profiles)

×
×
  • Create New...