[Asus KGPE-D16: missing and wrong information]

Thank you! The new version now shows correct "Motherboard Physical Info".

[Asus KGPE-D16: missing and wrong information]

Thank you for your reply, I will check the new beta version and report back.

[Asus KGPE-D16: missing and wrong information]

The system consists of an Asus KGPE-D16 mainboard, two Opteron 6282 SE processors and 8x 4GB DDR3-1600 RAM.

Please have a look at the attached screenshot. While the green CPUID windows states correctly that this is octal channel RAM, the section "Motherboard, Motherboard" shows only "Dual DDR3 SDRAM". Also, there are usually more information about the mainboard (when I use the same AIDA64 version on other systems) on this page like the CPU socket type and available extension slots.

Please let me know if you need any further information.

[Report for Aaeon AHP-1081]

This Industrial PC (Aaeon AHP-1081: http://www.aaeon.com...3_TW_UTF-8.html) is unknown for AIDA64 2.70.2112. Here is the report.htm. Hope this helps!

Report.zip

[Dell Dimension E520 - no sensor readings except HDD, no RAM infos]

Ok, thanks for your efforts.

I just re-checked with CPU-Z, it also has the same problems.

[Dell Dimension E520 - no sensor readings except HDD, no RAM infos]

Here is the PCI dump.

pcidump.txt

[Dell Dimension E520 - no sensor readings except HDD, no RAM infos]

Computer, Sensor now shows one additional sensor value, the speed of the CPU fan.

But there aren't any new information on Motherboard, Motherboard or Motherboard, Chipset.

[Dell Dimension E520 - no sensor readings except HDD, no RAM infos]

Thank you, I will gladly test your fixes.

[Dell Dimension E520 - no sensor readings except HDD, no RAM infos]

I attached the screenshots of mentioned Aida64 pages.

[Dell Dimension E520 - no sensor readings except HDD, no RAM infos]

Yes, the user has full Administrator permissions. Also it is running Windows XP, so there aren't any problems with UAC.

CPU FSB Clock and CPU Multiplier are visible on Computer, Overclock.

[Dell Dimension E520 - no sensor readings except HDD, no RAM infos]

Here I have an older Dell Dimension E520. Aida64 (build 2108) doesn't seem to have much luck in retrieving some information from this system. On the Computer, Sensor page, I can only see the HDD's temperature, nothing more. On the Motherboard, Motherboard page there are no data about the speed of the system RAM. There are also no data about RAM timings on the Motherboard, Chipset, North Bridge page.

Please let me know what I can do to provide information you need to support this system.