Jump to content

silvertuna

Members
 View Profile  See their activity

  • Posts

    24

  • Joined

  • Last visited

 Content Type 

Posts posted by silvertuna

    fixed: EVGA Z390 Dark sensor support

    in Hardware monitoring

    Posted

    @Fiery I did some further analysis on temp configurations and my suspicions were accurate. The current labeling (probe to temp matching) by default is incorrect. I was not able to snap pics fast enough but the data points to the below being the correct mapping. Sure, I'm able to manually change them myself but thought it might help to have the defaults correct.

    Additionally, I was able to further verify the M.2 #1 and #2 mapping by running stress tests on each drive.

    The data below is broken down into (current AIDA display > real sensor)

    M.2 #1 > ATX 6P

    DIMM (relabeled to VDIMM VRM) > M.2 KEY-M(1)

    PCH > DIMM (VDIMM VRM)

    M.2 #2 > M.2 KEY-M(2) Correct

    ATX 6P > PCH (I can display the ATX 6P temp on Remote LCD even though it does not show in the sensor list)

    image.png.abdd1e4c15fb59e0b26f4e8b992a8d72.png

    190220162550.png.669b53f79aa1cc2f20499fe4ca7bc852.png

     

    fixed: EVGA Z390 Dark sensor support

    in Hardware monitoring

    Posted

    Not quite sure what happened here, but it seems worse than the last beta.

    The DIMM temperature is mislabeled? The correct ones are DIMM1 and DIMM3. There are 2 PCH values? The M.2 fields are listed incorrectly, the correct temperatures are listed in the Samsung SSD fields (the M2 temps above correspond to these so no need to list it twice).

    There should be ATX 6P and VDIMM VRM temperatures. If you look above, those are the only temps that were not shown in the last beta. The Motherboard temp below is the Sys temp.

    Are you able to use the data dump i provided in the first post to see exactly what values correspond to the sensor labels in the picture above?

    Thanks!

    image.thumb.png.15d0c6b8902e3443207e1a3af6769eb0.png

×
×
  • Create New...