Jump to content
AIDA64 Discussion Forum


  • Content Count

  • Joined

  • Last visited

Everything posted by Novius

  1. And sorta related to this. Is it also possible to remove the capacity thats listed after each Disk Drive under Storage? So tat i only get the name of the diskdrive. (Or in above only get the name of the network adapter.)
  2. Hello. Is it possible to remove the ID adress that gets listed in summary after the wireless / lan device. Best regards.
  3. Yes, but it says Intel Skylake-H GT2 - Integrated Graphics Controller, instead of saying Intel HD Graphics 530.
  4. Okay, then i just wonder why its not showing my Intel(R) HD Graphics 530 as being integrated, but instead showing whats on the picture?
  5. Hello, i seem to have a problem with AMD GPU's not showing up in summary. It shows my integrated graphicscard, but not the dedicated. Is there a setting, or something ive missed as to why it does not show up here in this part of the report?
  6. Hello, Is there a way to make AIDA to tell the difference between an integrated graphics card, and a dedicated graphicscard. So instead of it just being in a pile of graphicscards, it says that the "Intel(R) HD Graphics P630" is the integrated. And the "NVIDIA Quadro M2200" is the dedicated. Best regards
  7. Hello, I was wondering if it is possible to generate a report based on a custom RPF file, and then have it open up immediately, without the need of saving it to a location first. For instance i want to be able to open it as a MHTML file, just so i can quickly see the status of the harddisk, without the need of opening AIDA64 and then creating a report. Start \\nas\test\Script\Development\AIDA64-JH\AIDA64\Aida64.exe /CUSTOM \\nas\test\Script\Development\AIDA64-JH\HDDcheck.rpf /LANGEN Start \\nas\test\Script\Development\AIDA64-JH\AIDA64\Aida64.exe /CUSTOM \\nas\test\Script\Development\AIDA64-JH\HDDcheck.rpf /LANGEN This code i what i have so far, i have done it before where i have had it save the file to a location, and then i could just go to that location and open the file.
  8. okay, ill do that for future panels. But what about Multitouch panels, is it possible to get this information listed under monitor aswell?
  9. I got it working now, thanks for the help It worked when i removed all the " marks
  10. Start "\\nas\test\Script\Development\AIDA64-JH\AIDA64\Aida64.exe" /CUSTOM \\nas\test\Script\Development\AIDA64-JH\fulrep.rpf /LANGEN /R "\\Directory\specs\Logs_PCd_Burn\%serial%\%serial%" /XML I tried that, it still gives me the same error.
  11. My batch file. This is printed from CMD when the script runs. "\\Directory\Directory\Directory\Directory\AIDA64-JH\AIDA64\Aida64.exe" /CUSTOM \\nas\test\Script\Development\AIDA64-JH\fulrep.rpf /LANGEN /R "\\Directory\Directory\Directory\R90KLBTM\R90KLBTM /XML Invalid switch - "/CUSTOM".
  12. So when i run the script from my server, it says: Invalid switch - "/Custom"
  13. Yup that works perfectly! So i need to add another layer to where the file is stored. All the machines im running this on, already have a folder created with their serial number. So how do i make the script post the file that i create (Still named as serial when its saved), into the folder thats named serial.
  14. Okay thank you. Say i encounter new monitors, is there a place i should post information about them, so they can be added in future packages?
  15. Also, i see that what you linked me to is for the Extreme version, im currently running buisness. And i dont see any beta downloads for that.
  16. Is there a repository i can search through to see if my monitor is listed in it?
  17. Hello, I'm trying to make a batch file that will run AIDA64 (Buisness) and use the custom template ive created. I furthermore want the report to be placed in a folder thats name after the Serial Number on the motherboard. (The file must also be named after the Serial Number.) Sofar ive come up with: for /F "skip=2 tokens=2 delims=," %%A in ('wmic bios get serialnumber /FORMAT:csv') do (set "serial=%%A") echo %serial% Start D:\AIDA64\Aida64.exe /CUSTOM C:\Users\Jeppe Helbo\Desktop\AIDA64project\fulrep.rpf /LANGEN /R C:\Users\Jeppe Helbo\Desktop\AIDA64project\Testmaskiner\%serial% /XML PAUSE But im not too great at creating batch files, so the above just runs the entire aida full report, and dont output it anywhere. Does anyone have some insight on what im doing wrong.
  18. [ Generic PnP Monitor [NoDB] ] Monitor Properties: Monitor Name Generic PnP Monitor [NoDB] Monitor ID LEN4140 Manufacturer ATNA40JU01-0 Manufacture Date Week 49 / 2015 Serial Number None Max. Visible Display Size 310 mm x 175 mm (14.0") Picture Aspect Ratio 16:9 Gamma 2.20 DPMS Mode Support Standby, Suspend, Active-Off Supported Video Modes: 2560 x 1440 Pixel Clock: 242.19 MHz This is an OLED panel
  19. What part of the AIDA report would it be possible to find the information from if i had a monitor type that was in the database?
  20. Hello. Is it possible to see from the AIDA file what type of LCD is connected? For example to tell if its an OLED or IPS panel.
  21. A follow up for the USB peripherals. Is it possible to get it to list the hardware ids related to the diferent USB devices?
  22. Thanks for the reply Ill take this into consideration.
  23. The project is about scanning for hardware information and then posting it to a page that can be used for (just an example) selling a product based on hardware. Its not easy to describe exactly what im trying to do. Alot of the other components in the computer, like the total amount of ram installed, or the name of the computer, can be targeted directly at say the Motherboard, and then sub section to Motherboard Properties, where the motherboard name can be found. The above applies to several other components aswell. By being able to pinpoint where the components are in the XML file, i can have a different script call to "Motherboard Name" and take the result from there, for example: ASUS ZenBook 3 UX390UA. The problem with the Camera / Bluetooth, in this case, is that if i follow the same logic for targeting a part, i would first target the "Summary" of the PC. Then under "Summary" i would tell my script to go to "Peripherals", and as it is currently i would have to make it call to "USB Device". Doing this could give me 5 different outputs, to the same field.
  24. Would there be any way to make it so that each "USB Device" obtained a #number. So that each one was called "USB Device #1" and then "USB Device #2". This would be so that i could call to one of the numbers and always get the property from that number, regardles of it is a camera or a bluetooth module.
  • Create New...