Jump to content

Rabbithole

Members
  • Posts

    68
  • Joined

  • Last visited

  • Days Won

    15

Posts posted by Rabbithole

  1. On 4/29/2018 at 12:23 AM, clean said:

    Hey Rabbithole,

    I've viewed and admire your sensor panels, you are knowledgeable and resourceful with Aida64. Because of your shared knowledge, I've created my very own sensor panel; consequently, I'm stuck when it comes to connecting my LCD which shows my desktop image and not my custom panel. Can you give information on what I may or may not be doing? I am aware that Aida64 have particular LCD's that are set up to work, I'm using an external camera monitor. Do I need a third party program? Any help will be great.

    Thanks, So tell me... how are you connecting your camera monitor? If it connects to your video card and your video card supports multiple monitors then all you need to do is go into the display settings and under multiple displays select "extend these displays" then drag the sensor panel into the desired monitor.

  2. On 3/21/2018 at 2:15 PM, maddybutcher said:

    Yes i test the gauge trick. but I do not know how that works. 15 picture and empty sensore???

    assign the gauge to an active sensor like your pump, then unclick on the show icon ect and you'll be left with just the gauge moving.

    As for the panel I see a lot of things you can do with it;)

     

  3. Although I have made some detailed panels that looked ok to me I have come to realize that because I'm using a 5" LCD as my panel monitor I can't see the sensors because everything is just way too small :huh: so I decided to use only what I think would be helpful to my situation this round. Thank you StealthDefender for helping me realize this :rolleyes: I would also like to thank Stupe9968 for the killer gauge templates B).

    My new panel (I'm still kinda messin with it)

    5aaa39e68eb91_jediassassin1.png.befaa8548be57b5791765d82dd4c0c40.png

    So I just finished my new long awaited rig, specs are as of the following:

    PC Name - Jedi Assassin
    Motherboard - Gigabyte GA Z370 Aorus Gaming 7

    CPU - Intel i7-8700k @ 5.0 MHz, 1.350 V

    CPU Cooler - NZXT Kraken X52

    RAM - G-Skill Trident Z RGB 16G (2x8) DDR4-3000 MHz 16-18-18-38 CR2

    SSD - Samsung M.2 960 EVO 500 MB

    (Temp)
    Portable HDD - Seagate Expansion 2 TB

    GPU - Gigabyte GeForce GTX 1060 Aorus Extreme Gaming 6GB

    Main Monitor - Viotek GN34C 34" curved 3440 x 1440 100Hz + O.C.
    Sensor Panel Monitor - 5" LCD attached to case

    PSU - EVGA SuperNova 850 G2 Gold

    Case - Phantek Enthoo Pro

    2x NZXT 5x USB hub

    Speakers - Logitech Z623 200watt 2.1 THX Certified

    LG Blu-Ray DVD/Burner 

    FANS
    5x 120mm Thermaltake Riing plus RGB
    2x 120mm NZXT
    2x 140mm Corsair High Volume Purple LED

     

    Jedi Assassin RGB Crest 2.jpg

    • Like 6
  4. 15 hours ago, Stupe9968 said:

     

     

    PUMP_130_80_0.png

    PUMP_130_80_1.png

    PUMP_130_80_2.png

    PUMP_130_80_3.png

    PUMP_130_80_4.png

    PUMP_130_80_5.png

    PUMP_130_80_6.png

    PUMP_130_80_7.png

    PUMP_130_80_8.png

    PUMP_130_80_9.png

    PUMP_130_80_10.png

    PUMP_130_80_11.png

    PUMP_130_80_12.png

    PUMP_130_80_13.png

    PUMP_130_80_14.png

    PUMP_130_80_15.png

    FAN_130_80_0.png

    FAN_130_80_1.png

    FAN_130_80_2.png

    FAN_130_80_3.png

    FAN_130_80_4.png

    FAN_130_80_5.png

    FAN_130_80_6.png

    FAN_130_80_7.png

    FAN_130_80_8.png

    FAN_130_80_9.png

    FAN_130_80_10.png

    FAN_130_80_11.png

    FAN_130_80_12.png

    FAN_130_80_13.png

    FAN_130_80_14.png

    FAN_130_80_15.png

    Hey Stupe9968 ... THANK YOU!!!  You know I make all kinds of guages and fans ect... but these ones are super cool and they match my new build perfectly. Thanks again. Hey I figured out how to "mock" an animation in the background of a panel design I'll show/give you some files if your interested...BTW ... um don't know why this is typing in bold?? Anyways I altered the color of this gauge to purple, if there's any color you want it in let me know and I'll be happy to make it for ya.....(almost done with the panel, will post soon)   Peace man.....Rabbithole 

  5. On 3/1/2018 at 1:05 AM, StealthDefender said:

    At this time i am proud to present you my panel!

    For me it was a hard time to do something because i am not realy good at this.

    The gauges are my own creation, some other stuff are from other users.

    THX at this place to all, i have mentioned these great people some lines above.

    Would be nice to hear your opinion.

    I hope it worked with the upload from the template, feel free to use it. ;-)

    Greetz Stealth

     

    Unbenannt.thumb.PNG.69815bc7f3164450b9c61280390aef97.PNG

    2018-03-01 - final.oslcd

    Hi Stealth, nice panel man ... EZ 2 read, I finally finished my new build, I'm gonna have to limit myself to what I put on my panel (5" lcd) there's a lot of stuff to my new build and my eye's aren't so good...lol but I like what you did here.  I get my new monitor Tuesday... 34" curved 1440 @ 100hz VA panel ... Whooo Hooo !

    • Like 1
    • Haha 1
  6. On 2/14/2018 at 2:10 AM, StealthDefender said:

    I am testing an playing around with some panel by myself.The idea lies on this 2 great templates.

    THX @operbico for the template file.

    Sadly @drDriz didn´t share his panel and only have this one post and never come back again.

    I was interested how he make the gauges on top, they look amazing.

    @Rabbithole also give me some great ideas and made a fantastic panel for myself!

    But as a nerd i have to do some stuff by myself. But design is very hard for me, so templates are welcome. :-)

    So what do you thing on my first try? I have changed the gauges myself, the rest is at the moment 1:1 to the template of @operbico.

    Have a nice day,

    Greetz Stealth

     

     

    Test.PNG

    I like the gauges ... panel is easy to see/read too 

    • Like 1
  7. 8 hours ago, maddybutcher said:

     

    
    my next project, I do not know yet if it will be. i need gif support then i can use my gifs to animate the blue lines
    

    TEST.png

    aida64 does not support GIFs however I found a way to trick the software ... all you have to do is turn the gif into 16 slightly different png's and make it into a "gauge" then un-select the show value,icon ect. and assign it to sensor something that would make a "gauge" have a lot of movement ...  look here

    https://www.dropbox.com/s/4hs9b6nzw2bcg9h/2018-01-11_00-39-51.mp4?dl=0

    hope this helps you out...

    Rabbithole

     

  8. 18 hours ago, StealthDefender said:

    Wow, looks really great!

    I will organize some things to pass my needs, like Cores, HDD space etc.!

    At this moment i see no signal strenght (is this for wifi?) and Connection speed!

    I think i have to adjust it!

    A cool thing would be if the fans are also get like the gauges :P.

    On the lower right side 2 furueistic bars would be satisfying like in the other templates from start!

    Long story , short, i am happy with this first result, you made my (work)day so far.

    Your build also looks really nice to me. Will have a closer look later!

    Greetz Stealth

    to get a signal for connection speed and signal strength you need to open the panel manager and click on the signal strength (both of them there are 2 one is a graph and one is a simple sensor item) then click modify find the signal strength tag in the list and click it so it resets to your wifi then hit ok. do this same thing for the connection speed as well. I actually have some fans that appear to spin but I'm still working out the bugs ... I will keep you informed and send you the files soon.

    • Thanks 1
  9. On 1/25/2018 at 4:50 AM, StealthDefender said:

    OMG this looks amazing. I give it a try when i am at home after work!

    I know its a lot of work and i am very happy someone did this for me, cause i am bad at design in any way.

    Its a pleasure to let your branding where it belongs to.

    I will give feedback as soon as possible.

    Maybe you find a function for your bars from the previous red template.

    Eventually on the right side of the panel.

    The bars are amazing and have a technoid, future look that i like.

    Thanks by this way.......till later!

    Greetz Stealth

    I think we're real close to finishing ... let me know...

     

    • Like 1
  10. On 1/24/2018 at 1:08 AM, StealthDefender said:

    Looks nice man, wow.

    Ok i have 1 waterpump, speed

    4 fans in front in push pull on radiator, speed

    3 fans in rear, speed

    Each fan and pump are on seperate connectors, but the config is my turn.

    The processor has 8 cores and 16 threads.

    I would like have infos about

    Cpu/Core utilization, vcore, clock in ghz

    Cpu/Gpu/Mobo/Ram Temps

    4 hdd space

    Ram utilization, timings snd clock

    Time, date

    Network stats..


    Thats it so far

    Colour also light green would be nice.

    Greetz Stealth........

    Edit: short info, my cpu onl, have 2 measure points for temprature.

    And frames per second counter would be great. Aida64 works with fraps but fraps wont work on my win10 machine! Must test a bit.

    So, i hope thats it.......for a while? :-)

    If you could send me the template over mail i send it to you on pm.

     

     

     

     

    Here is how it's coming along ... the gauges will be in green (still have to make them) check your email and get back to me.... also the background file is in the zip file below. I am doing this for free so please keep my "branding" in the bottom lower right of the panel B)

    aida64_2018-01-24_23-02-04.png

    Red - MSI - background 2 test.zip

     

    • Like 1
    • Thanks 1
  11. On 1/21/2018 at 1:23 PM, StealthDefender said:

    Hello, would be nice if you share and could do something different to me!

     

    This one would be great!

    Some infos about my rig.....

    AMD ryzen 7 1800x

    Corsair vengeance ddr4 16gb

    MSI pro gaming carbon mainboard

    Deepcool captain 240ex aio watercooler

    Nvidia gtx980

    Display is a 7" tablet with 1024x600 resolution!

    Gesetz Stealth

    Hey man this is just an idea of what I have so far , I need a little more info from you like how many fans/water pumps are you going to monitor and just what you want to monitor in general so I have a little more to go on......I assumed red in color cause MSI is usually red....

     

     

    • Thanks 1
  12. 1 hour ago, StealthDefender said:

    Hello, would be nice if you share and could do something different to me!

    Asus blue v.2.png

    This one would be great!

    Some infos about my rig.....

    AMD ryzen 7 1800x

    Corsair vengeance ddr4 16gb

    MSI pro gaming carbon mainboard

    Deepcool captain 240ex aio watercooler

    Nvidia gtx980

    Display is a 7" tablet with 1024x600 resolution!

    Gesetz Stealth

    Ok cool I'll see what I can come up with for ya we can fine tune it later on ...

    • Like 1
    • Thanks 1
  13. 5 hours ago, StealthDefender said:

    OMG please share!!!

    Here are so many great ideas and screens.

    Greetz Stealth

    Hello, at the moment my internet at home where all my files are is not working (centurylink sucks lol) so as soon as they get their sh*t together I would be happy to share. I compress to "zip" files and my gauges and stuff were designed to fit 800 x 480 res. if you need larger and want me to do it let me know also what background are you looking for? I have and can make lots....

     

  14. On 1/17/2018 at 1:05 AM, pimp1310 said:

     

     

    hey,

     

    okay, thats exactly my problem, my fans are limited to temperature. And they normally have a rpm of 400. 

    you use the CPU utilization for the fans on this example? in your video the core#1 is changing, then the result  "fine" .

    In Idle i had only 2% CPU utilization, and then the fans doesnt move much.

     

    Can you post an exmple of your choosen png's ?

    And what do you mean with "Min value1600" and "Max Value 2000", this is not  by "CPU utilization" or?

    CPU Utilization has only the value 0 --> 100 

     

    The second example works well, it depends too on CPU utilization ? Which Png's and Source, and values you use?

     

     

    THX

     

     

     

     

     

    For the fan gauges I assign the gauge to the fan setting. It's only the "background" animation that I assigned to cpu utilization.(because it's only for animation/movement purposes) So as for setting the values to a fan type gauge set the max value to whatever your fan rpm's top value is in your case I think you said it was 800 . Look to see where your fan's rpms hover when you monitor it then set the min value about 200 lower than whatever that is. My internet is not working right now so I can not send you the fan png yet but also I need to know what size you want it in (I think the ones I have shown you are 70 x 70) I am responding to you from my workplace on my tablet so I am not at my pc with all my information I will contact you again soon as I'm back on line

     

  15. On 1/16/2018 at 2:04 PM, pimp1310 said:

    yeah but this is not a good animation, i tried it here, makes 16 png with 22,5* rotation of every picture. 22,5*16=360*

     

    but when i depend it on CPU utilization, the problem is he has for exampe in the first moment 40% and then 10% and then 80%, he takes random images......

    that doesont looks very well....

     

    what have you by "Min Value" and "Max Value" ?

     

     

    Here are my files in Grey with black background.

    animated_fan_test.rar

    Hello, yea I'm still messing with the details to make it look better ... I'm finding out on the fans that if I only use 3-4 different images and just repeat them I get more movement effect on the fans when the monitoring doesn't fluctuate much as in fan rpms even with pwm working. For the fans I have them set to the fans it's just the other "electric ball of light" that I have set to the cpu utilization.  But also as you mentioned I think your right about playing with the "value" settings as well. I now have them set to (1600 min and 2000 max) and they seem to move a little better thanks.  Here is a link to see how they are working now ....https://www.dropbox.com/s/wkzoxbbwnsgw1jv/2018-01-16_20-50-37.mp4?dl=0     At the moment I am waiting on a couple of fan grills for my side fans in/out so they are not hooked up but for "show" purposes in is actually front too and out is rear thats why the rpms are the same and for some reason my rear fan runs pretty steady at 1722 rpms without much movement.  So what I propose is you just experiment with it and maybe together we can find what will work the bestB) ... keep me posted .... thanks 

     

  16. On 1/16/2018 at 8:23 AM, Mayo0666 said:

    Hi Rabbithole,

    thank-you for your answer,  I understand since i know how to make new gauges since i have modified existing gauges with new colors...

    Nice idea, i gues when CPU utilization stop the image will not "move", correct? I would love it in red... as per asustyle

    It could be nice to have more gauges to work on since i am not so good in create them from zero ...

    kinda but what I did is I made the animation with only 3 images then repeated the 3 over and over till it made 16 images. That way it shows movement with very little variations from whatever it is you have it monitoring from and I've only just started messing with the idea so with trial and error I'm sure to find what to set it to ... so just play around with it and if you find a way to make it function better please share it with me. So I have been making all sorts of gauges , backgrounds, fans and such and I have a bunch of ASUS / ROG, EVGA and AORUS background/interface looking backgrounds and I can do them in any size and color so if there is anything you are looking for in particular let me know if I can assist you B)

     

     

     

     this gauge starts at top center and comes down both sides at the same time.

    this is an example of a red gauge almost at full

    • Like 1
  17. On 1/15/2018 at 7:37 AM, operbico said:

    thank you for advice, usb driver for w10 are incuded?

    bye

    It's plug and play but yes it did come with a mini disk (not sure whats on it ... I think it's software for raspberryPI and it comes with the mounting kit for the raspberry PI as well....

  18. 5 hours ago, operbico said:

    nice setup. I'm looking for an lcd 5" panel to connect via usb to replace my alphacool and sdc mecgtron (in my second pc)

    I prefer usb connection because i can use internal usb on mb to have a better cable managment

    thank you

    
    
     

    no problem, the one I use has both the usb and hdmi and two ports for the usb , one makes it touch screen

  19. 3 hours ago, operbico said:

    are you using win 7 or w10?

     

    3 hours ago, pimp1310 said:

    Yeah correct that was the Problem

     

    But another problem, i use a second lcd for the aida64 sensor panel.

     

    I easy place it in windows on the second screen, but when i start a game, the lcd is black or the sensor panel i only half to view.....

     

    Gives there a fix ?

    When that happened to me (the lcd is black or the sensor panel i only half to view....) it was my screen resolution for my main screen that wasn't set to the game specs. 

    • Like 1
  20. 3 hours ago, operbico said:

    what kind of lcd panel are you using?

    This is a 5" HDMI screen. I bought this one because it came with the frame and cables.After hooking it up to see how it would look I realized that if I were to mount it in my case like so many others do it might look cool but it would be totally non-functionable becase scince it is a LCD at that viewing angle I can't see the stuff on the screen because of the glare. So I made a bracket and it will be mounted to the upper right side of my case at the perfect angle to view it properly. It's made by a company called Waveshare and I bought it at amazon ... https://www.amazon.com/gp/product/B00ZXUTXCS/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

×
×
  • Create New...