Fyew-jit-tiv
-
Posts
124 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Fyew-jit-tiv
-
-
P.S Here is another problem when i try to quit the program.
-
Hi Fiery,
Just re-installed system and installed latest Beta version and every time i launch or try to do something in Aida i get this message popping up (See Attached file)
Question... Do you still have the same guys who worked Everest working on Aida? The reason why i ask is personally i have never experienced this amount of problems with Everest as i do with Aida. In fact for the 2 yrs I'd been using Everest i only remember contacting you once for a problem. In the last few weeks i have had nothing but problem after problem with Aida. Kinda feels like you got new people working on the software.
Anyways let us know what you think about this new problem, I have installed Aida on a new OS install with no third party software.
Regards
-
Thank you for the dumps. We've tweaked a bit around the fan RPM measurement on Asus H55 and P55 boards. Please upgrade to the latest beta version of AIDA64 Extreme Edition available at:
http://www.aida64.com/downloads/aida64extremebuild1219sdk6ngm0yczip
After upgrading to this new version, make sure to restart Windows to finalize the upgrade.
Let me know how it works.
Thanks,
Fiery
Hi Fiery,
I can now confirm that the problem with CPU RPM has been fixed with build 1219.
I'm now re-install OS on P6X58D Comp and will let you know by the end of today if that makes any difference to the update freq
Thanks.
Thanks.
-
Im at a lost to fiery. Im going to re-install windows on my main comp and see if that helps.!
-
just to let you know i have just re-installed v 1.2.1150 and all is working fine with update freq.!
-
ok... I think i have exhausted every possibility my end.. I have tried Adia64 v1.5 Beta on 2 systems now and have the same problem. Again i dont get this problem with every version prior to v1.5.
-
ok so the time is updating correctlt within the registry. under main menu / File / Preferences / Hardware Monitoring / update freq ... are these values meant to be written to the registry...? If so what do they come under?
-
forget the last post.. Just realized what you meant.. Sorry.. checking now.!
-
With external apps set to a value of 1, i dont see the STIME in the registry.?
-
Here are 2 clips... with external sensor update freq set to 1... does this match up with the bios?
-
ok my bad.. didnt notice i'd switch them off before launchin registry. So fiery why is it when i install Aida64 v1.2 or everest i dont have this problem with update freq but with 1.5 i do? and riva's update freq does NOT happen with any other plugin but Adia64..
-
Not sure why that arrow is there... Here is another screen shot
-
Fiery look at post#14. there is a capture there which shows what i have under Aida in my registry.. there is NO Sensor value there.!
thanks
-
Hi Fiery,
LOL....Read your Post #5 in this thread. Point 1 Update freq.. That is what i was responding too.! I think its because you answered 2 question which were posted in 2 different threads. hope you now get what i mean. So for the update freq am i meant to have a sensor value reading in the registry? If so i don't have on either of my computers.
Please advise.!
Regards.
-
Hi Fiery,
So i have done what you have asked, and i don't see anything in my registry which mentions \Sensorvalue. I have enabled shared memory checked, Enable writing sensor values to registry checked.. Screen shot inc... So you have either given me the wrong info or Adia64 has this problem that have have been telling you about.!
Regards.!
Ps. To also let you know i installed version 1.2 & everest and this problem does NOT present itself. I have been running rivatuner for the past 2yrs with Everest & Aida64 and up untill now this was NEVER a problem. So it must be something you guys have done with Aida64 1.5+
-
AIDA64 (the motherboard sensor chip actually) cannot and won't check for power connection, it only senses the RPM wire.
It was just a thought. Just trying to help find a route to the problem.!
Thanks
-
Just had a thought about this from reading one of your post.. My pumps only have one wire connected to the headers (to show pump rpm). Could it be that Adia is not detecting power being taken from these headers (CPU&Chassis#1)?
-
Next time it happens, when after the configured alert items disappear, can you please check out on the Sensor page whether the fans in question can be detected spinning by AIDA64? Also, when that happens please check the AIDA64.INI file, if the configured alert items are still there or not.
I suppose it may be because for whatever reason AIDA64 stops being able to find the watched fans at its startup, so it treats them as unconnected fan headers
Thanks,
Fiery
Hi Fiery, I know the pumps are working as i can see the status via GPU Gadget which is taken from Aida via Rivatuner. Not sure about the Aida64.ini file. I will have that comp back online come tomorrow night and will let you know if the ini file is still in place.
Thanks
-
P.S screen shots were taken from my P7P55 Machine. Im currently cleaning out from the main machine in question (P6X58D). If you need Aida dumps then please let me know asa as that comp will be off-line for the next 24hrs.
Thanks
-
When those items are not there in the Preferences, are those fans spinning then? Not spinning (0 RPM) fans will not be collected by the AIDA64 Hardware Monitoring module, because AIDA64 treats "0 RPM" fans as unconnected fans, hence it will not poll them. But when you have a fan already configured, when it stops AIDA64 will of course fire an alert.
The pumps are functioning ok. Maybe im not explaing this correctly. I'll try from the start again and hopefully i can make this understandable. LOL.
I have 2 pumps connected. 1 to GPU & 1 to CPU (CPU header & Chassis #1 Header). Because my pumps are so quite i decided to setup alerts to alert me if either pump stops working. So i goto Prefernces>Alerts and setup my alerts (pls see capture 1), But after a few restarts or a day later ill come back to the alerts screen and what i have setup previously is no longer there (pls see capture 2). Hopefully i have explain this clear enough if not please let me know and i'll try again...!
Thanks.
-
1) Update Frequency: we've just verified the update freq for the AIDA64 External Applications feature, and it works as expected, we haven't found any discrepancies. In case Rivatuner handles something wrong, then I suppose it's a bug in Rivatuner and not in AIDA64. You can actually verify the update frequency of the Ext.Apps feature if you enable the Registry support (AIDA64 / main menu / File / Preferences / Hardware Monitoring / External Applications / Enable writing sensor values to Registry), enable the Time item there, and then check out the published STIME value in the Registry at HKEY_CURRENT_USER\Software\FinalWire\AIDA64\SensorValues.
2) Fans: I'm not sure if I understand it, so please clarify. Do you have fans connected and spinning fine, but those fans sometimes disappear from the list of Alerting items in AIDA64 / main menu / File / Preferences / Alerting? Or you have the AIDA64 Alerting feature properly configured for those fans, but the actual alert is not fired when one of the fans stop spinning?
Thanks,
Fiery
Hi Fiery,
This update freq doesn't happen when running Aida64 v1.2. I have only noticed this when running Aida64 1.5+. As for the Alerts disaparing... If i goto Preferences>Alerting and setup an alert for the CPU fan (Below 3500rpm above 5000rpm) to shut down the system if these rpms have been breached (higher or Lower) then after a few restarts when i go back to check on these alerts i have setup they are not there.!
Thanks
-
Hi Fiery,
As requested here is the sensordump. As you can see this is showing the correct CPU RPM, But else where in Aida64 is doesn't.
Thanks
------[ AIDA64 v1.50.1212 Beta ]------
------[ Microsoft Windows 7 Home Premium 6.1.7600 (64-bit) ]------
------[ Motherboard Info ]------
Motherboard ID : 65-0903-000001-00101111-070910-P55$A1482001_BIOS DATE: 07/09/10 10:30:04 VER: 08.00.15
Motherboard Model : Asus P7P55-M
Motherboard Chipset : Intel Ibex Peak P55, Intel Ironlake
DMI MB Manufacturer : ASUSTeK Computer INC.
DMI MB Product : P7P55-M
DMI MB Version : Rev X.0x
DMI MB Serial : MT7006K29700217
DMI SYS Manufacturer: System manufacturer
DMI SYS Product : System Product Name
DMI SYS Version : System Version
DMI SYS Serial : System Serial Number
DMI BIOS Version : 0903
ITE 87xx Port = 00h
ITE 87xx HWMonitor Port = 0000h
ITE 87xx Device ID = 0000h
ITE 87xx Version = 00h
Winbond SuperIO Port = 2Eh
Winbond SuperIO HWMonitor Port = 0290h
Winbond SuperIO Device ID = B353h
Winbond Sensor ID A3/5C/reg$58 = A3 / 5C / C1
Fintek SuperIO Port = 00h
Fintek SuperIO HWMonitor Port = 0000h
Fintek SuperIO Device ID = 0000h
LPC47 SuperIO HWMonitor Port = 0000h
LPC47 SuperIO Device ID = FFFFh
------[ LM78 ISA Sensor Device at 0290 ]------
0000 04 FF 04 56 10 3C 32 22 9B 80 01 01 3C 3C 04 04
0010 04 FF 30 00 00 01 01 3C 53 27 00 00 27 FF FF CA
0020 99 DB D0 D0 D5 FF 26 C9 58 7A FF DA 00 99 9F F4
0030 E3 4B 56 EA F3 EE FA 1C 4B D4 53 90 05 9F 89 FF
0040 01 10 10 FF DF 00 3F F3 2D 21 00 C0 88 95 00 A3
0050 FF FF 00 FF FF FF 00 80 C1 9F FF FF 01 82 00 05
0060 FF FF 40 FF FF FF FF FF 0A FF 01 FF 01 FF FF FF
0070 04 04 0A 0A 00 64 4B 64 FF FF FF 1F 00 00 C9 00
0080 04 FF 04 56 10 3C 32 22 9B 80 01 01 3C 3C 04 04
0090 04 FF 30 00 00 01 01 3C 53 27 00 00 27 FF FF CA
00A0 99 DB D0 D0 D5 FF 26 C9 58 7A FF DA 00 99 9F F4
00B0 E3 4B 56 EA F3 EE FA 1C 4B D4 53 90 05 9F 89 FF
00C0 01 00 10 FF DF 00 3F F3 2D 21 00 C0 88 95 00 A3
00D0 FF FF 00 FF FF FF 00 80 C1 9F FF FF 01 82 00 05
00E0 FF FF 40 FF FF FF FF FF 0A FF 01 FF 01 FF FF FF
00F0 04 04 0A 0A 00 64 4B 64 FF FF FF 1F 00 00 C9 00
Bnk0 FF FF 00 FF FF FF 00 80 C1 9F FF FF 01 82 00 05
Bnk1 2C 00 00 4B 00 50 00 EA FF FF FF FF FF FF FF FF
Bnk2 4E 00 02 7D 00 7F 1E 54 FF FF FF FF FF FF FF FF
Bnk3 06 06 06 06 01 07 03 03 07 00 00 C0 63 01 00 00
Bnk4 39 13 FF 00 00 07 00 22 69 8E 1D B9 09 5F 20 FF
Bnk5 D5 72 03 FF 30 B1 74 65 B5 96 00 00 E4 00 00 00
Bnk6 7F 7F 7F 7F 7F 7F 07 7D 01 32 00 00 00 00 00 00
Reg$20 CPU Core: r = 153, r*0.016 = 2.45
Reg$21 CPU Aux: r = 219, r*0.016 = 3.50
Reg$22 +3.3 V: r = 208, r*0.016 = 3.33
Reg$23 +5 V: r = 208, r*0.016 = 3.33
Reg$24 +12 V: r = 213, r*0.016 = 3.41
Reg$25 -12 V: r = 255, r*0.016 = 4.08
Reg$26 -5 V: r = 38, r*0.016 = 0.61
------[ ACPI Temperatures & Fans ]------
_TZ_.THM0._TMP :
_TZ_.THM1._TMP :
_TZ_.THR0._TMP :
_TZ_.THR1._TMP :
_TZ_.TZ00._TMP :
_TZ_.TZ01._TMP :
_TZ_.RTMP :
_TZ_.RFAN :
_TZ_.RFAN(0) :
_TZ_.RFAN(1) :
_SB_.ATKD._HID :
_SB_.ATKD.TMPR :
_SB_.PCI0.LPC0.EC0_.CCTV :
_SB_.PCI0.LPC0.EC0_.LRPM :
_SB_.PCI0.LPC0.EC0_.HRPM :
_SB_.PCI0.SBRG.EC0_.ECPU :
_SB_.PCI0.SBRG.EC0_.TACH(0):
_SB_.PCI0.SBRG.EC0_.TACH(1):
_SB_.PCI0.SBRG.EC0_.TAH0 :
_SB_.PCI0.SBRG.EC0_.TAH1 :
_SB_.PCI0.SBRG.EC0_.ST00 :
_SB_.PCI0.SBRG.EC0_.SC01 :
_SB_.PCI0.SBRG.EC0_.SC02 :
_SB_.PCI0.SBRG.EC0_.SC03 :
_SB_.PCI0.SBRG.EC0_.SC04 :
_SB_.PCI0.SBRG.EC0_.SC05 :
_SB_.PCI0.SBRG.EC0_.SC06 :
_SB_.PCI0.PIB_.EC0_.TCRT :
_SB_.PCI0.SBRG.EC0_.CTPM :
_SB_.PCI0.SBRG.EC__.CPUT :
_SB_.PCI0.SBRG.EC__.SYST :
_SB_.PCI0.LPC_.EC0_.CTMP :
_SB_.PCI0.LPCB.EC0_.CTMP :
_SB_.PCI0.LPC_.EC0_.TMP1 :
_SB_.PCI0.LPC_.EC0_.TMP2 :
_SB_.PCI0.LPC_.EC0_.TMPI :
_SB_.PCI0.LPC_.EC0_.TMPV :
_SB_.PCI0.LPCB.EC0_.A1TP :
_SB_.PCI0.LPCB.EC0_.A2TP :
_SB_.PCI0.LPCB.EC0_.FAN0 :
_SB_.PCI0.LPCB.EC__.TS1R :
_SB_.PCI0.LPCB.EC__.TS2R :
_SB_.PCI0.LPCB.EC__.TS3R :
_SB_.PCI0.LPCB.EC__.F1FL :
_SB_.PCI0.LPCB.EC__.F1FH :
_SB_.PCI0.LPCB.EC__.F2FL :
_SB_.PCI0.LPCB.EC__.F2FH :
_SB_.PCI0.LPC_.H8EC.RTMP :
_SB_.PCI0.LPC_.H8EC.LTMP :
_SB_.PCI0.LPC_.H8EC.MTMP :
_SB_.PCI0.LPC_.H8EC.GTMP :
_SB_.PCI0.LPCB.H8EC.CTMP :
_SB_.PCI0.LPCB.H8EC.DTMP :
_SB_.PCI0.LPCB.H8EC.GTMP :
_SB_.PCI0.LPCB.H8EC.ITMP :
_SB_.PCI0.LPCB.H8EC.MTMP :
_SB_.PCI0.LPCB.H8EC.STMP :
_SB_.PCI0.LPCB.H8EC.PFAN :
------[ Asus ATK0110 ]------
Motherboard ID: P7P55-M
ICPU/VCPU/PCPU: 780 / 0 / 15912
CPU Temperature : 44.0 C
MB Temperature : 42949667.4 C
CHASSIS1 FAN Speed: 1917 RPM
CPU FAN Speed : 1383 RPM
+12 Voltage : 12.264 V
+3.3 Voltage : 3.328 V
+5 Voltage : 5.112 V
Vcore Voltage : 1.224 V
CPU Temperature : 44.0 C
MB Temperature : 42949667.4 C
Chassis1 Fan Speed: 1917 RPM
CPU Fan Speed : 1383 RPM
+12V Voltage : 12.264 V
+3.3V Voltage : 3.328 V
+5V Voltage : 5.112 V
Vcore Voltage : 1.224 V
CPU Over Voltage : 0.030 V
CPU PLL : 1.800 V
DRAM Bus Voltage : 1.650 V
IMC Voltage : 1.100 V
PCH : 1.050 V
BCLK Frequency : 133.00 MHz
CPU rated ratio : 24x
CPU Ratio : 24x
So here we can see the correct CPU RPM
-
Hi Fiery,
Here is a strange one, under Aida64 stress test ProbeII shows -55 on the mobo temp sensor and Aida doesn't (Screen shot inc), This is why i don't use ProbeII as it is so not accurate. Another thing to note is whilst under stress testing my core temps will go up to 60c+ but the CPU temps only goes up to 49c, normally it would idle @ around 44c which cant be right. Going to do this dump and post back in 5.
Thanks
-
Hi Fiery,
So i have installed ProbeII. Adia64 CPU temp matches ProbeII. What i find strange thou is (and correct me if I'm wrong)the core temps should be higher than the overall CPU temp? On my main Comp this is most certainly the case. ProbeII is on the other hand showing the correct CPU Fan RPM Speed whilst Aida is not. There seems to be 1000rpm's missing from Aida's readings. Screen shot inc. Compare with screen shot in OP.
Thanks.
AIDA64 Address Violation
in Bug reports
Posted
LOL...! Maybe its because i use my systems intensively, I work on these comps every day Fiery and i can assure you my comps run in tip top condition.. Maybe i should become one of your Beta testers seeing as I'm always finding something.