Search the Community

Hi, I have the asus strix x470-f with 5601 bios and an outdated version of aida64(from the start of 2020). Chipset and Tsensor(watercooling loop temp for me) temps have stopped showing for a while now and I assumed it was from getting bios updates and not updating aida. Installed latest beta (6.25.5462) and the problem persists. Asus Wmi and EC support are enabled (as i always had). Later i found out the following topic with the same problem(with olded bios than mine) that you are claiming to be an Asus issue , but sensors are showing in aisuite,hardwareinfo and other programs and only aida64 doesn`t seem to find them .

The CPU Temperature on the AsRock B550M Steel Series is incorrectly reported. Ryzen Master reports 86C while AIDA64 reports 46C MSI AfterBurner (RTSS) reports it correctly. I know its a brand new chipset, I'm not worried about it, just wanted you to know

So i have the cpu athlon x4 860k, gpu radeon rx 570, mbo Asus a58m-k, ram 8gb ddr3 1600mhz, HDD toshiba dt01aca100, PSU LCpower L6550(550W). And when I start ANY game on my PC temperature stucks at 64C. I have the latest bios update and it didnt fix it. I also tried stress test and temperature breaks the temperature and goes up to 65 and then the frequency drops from 4.0 GHZ to 3.22Ghz and the temp falls down to 64C. Can someone please help. My csgo starts to lag at low settings because of that. please help. sorry for bad english. Thanks for understanding.

Hi my CPU temp icon that shows between Motherboard and CPU Diode went missing I checked all preferences and cant find it please help Field Value Sensor Properties Sensor Type Nuvoton NCT6797D (ISA A20h) GPU Sensor Type Diode (NV-Diode) Motherboard Name MSI MS-7B12 Chassis Intrusion Detected No Temperatures Motherboard 32 °C (90 °F) CPU Diode 35 °C (95 °F) CPU Socket 35 °C (95 °F) CPU Package 35 °C (95 °F) CPU IA Cores 35 °C (95 °F) CPU GT Cores 33 °C (91 °F) CPU #1 / Core #1 24 °C (75 °F) CPU #1 / Core #2 24 °C (75 °F) CPU #1 / Core #3 24 °C (75 °F) CPU #1 / Core #4 24 °C (75 °F) CPU #1 / Core #5 24 °C (75 °F) CPU #1 / Core #6 23 °C (73 °F) CPU #1 / Core #7 23 °C (73 °F) CPU #1 / Core #8 25 °C (77 °F) MOS 51 °C (124 °F) GPU1: GPU Diode 57 °C (135 °F) GPU2: GPU Diode 53 °C (127 °F) Samsung SSD 970 EVO Plus 500GB 48 °C (118 °F) ST3000DM008-2DM166 27 °C (81 °F) Cooling Fans CPU 2156 RPM GPU1: GPU 867 RPM (24%) GPU2: GPU 405 RPM (11%) Voltage Values CPU Core 1.334 V CPU VID 1.280 V +3.3 V 3.376 V +5 V 5.080 V +12 V 12.000 V DIMM 1.360 V PCH Core 1.064 V VCCIO 1.366 V VCCSA 1.353 V GPU1: GPU Core 1.050 V GPU2: GPU Core 1.063 V Power Values CPU Package 25.30 W CPU IA Cores 23.04 W CPU Uncore 0.71 W DIMM 1.54 W GPU1: GPU TDP% 29% GPU2: GPU TDP% 31%

I wish to see in the near future a customizable option that allow AIDA64 to show real time notifications about temperature, as other tools do, but doing it as AIDA64, without interfering with any other part of the OS functionalities, this could help users to be more comprehensive about the whys of their lack of performance of batteries produce by the wear of the batteries due to heat generated during charging, or intensive use. This I bet it will help a lot of people who don't comprehend what happens with their bateries, until battery breaks completely. I'd like to see what other user want about this particular topic. A recent article seen sets as the right charging temperature round 27 ºC or 80.6 ºF , and the inadequate as 30 ºC or 86 ºF. The next article give a basis for this conclusion. https://pubs.acs.org/doi/10.1021/acsenergylett.9b00663

hellow friends,I'm lighting from NanJING city,China.I'm making a cheap module to show some information about hardware,like How much the CPU/GPU/RAM/SSD is used ,and their temperature.I want this module is cheap enough and powerful enough，If we do not calculate the cost of OLED,it will cost no more than three dollars include PCB，MCU and others like resistor and capacitor in 0603.Now,I have designed PCB,once the program is completely ready,I will send the PCB drawing to the foundry.I finished 90% of the program part.But now I get a trouble.I used to use a software to get information I required,but it's very Unstable.It doesn't even work now.I am so sad that the module is almost finished. I am not familiar with Aida64,but I think it must be able to transmit information with virtual serial port.In my design, USB simulate as serial port,Aida64 transfer information to the MCU by USB.MCU includes the features of CP2102 andCH340. Please help me,I will open source my code and PCB design.In China,MCU and PCB are cheap enough.if you want PCB, I can give one piece to you for free,but you have to come to Nanjing to take it away,hah,the shipping costs are expensive.

Hi guys, recently got a water temp plug sensor and wanted to know if there's any way Aida can read it over USB if I were to get this thing https://www.google.com.au/search?q=alphacool+heatmaster&oq=alphacool+heat&aqs=chrome.1.69i57j0l3j69i60.10548j0j4&client=ms-android-telstra-au&sourceid=chrome-mobile&ie=UTF-8#imgrc=RkkGAkbfWtJdRM: My board doesn't have a 2 pin temp sensor unfortunately. Cheers for your time

Hello, Why the different temperatures of the CPU programs differ by ~15C? Where is more correct? CPU - Xeon E5450, MB - Intel DP43BF

Here are some of my suggestions for the new SensorPanel. Provide the option to Underline fonts. Especially with Static Labels. Give the sensorpanel the option to make the background transparent. With Thermal sensor data, give the temperature value/unit the ability to change colors depending on the temp. Such as the option with the Bars.