Search the Community
Showing results for tags 'rampage'.
Found 5 results
-
Hello, Aida64 is reporting wrong VCCIN and DIMM AB and CD voltages, after overclocking. CPU is Intel 10940X and Memory is Corsair Dominator Platinum RGB 3600 Mhz. Thanks a Lot Best Regards
-
Hello With Rampage VI Extreme and System Stability Test, I have bugs with probes reading during the tests As on the Screen, the temperature 1 indicated 201°C, but it is 24°C in reality For VRM, I had the same thing, minimum temperature 1°C (not visible on this screen) And also, when I run the tests, Aida seems to be "blocked" after a few seconds and after 20 seconds to 1mn, it's good, the temperatures and voltages "vary" and the "Elapsed Time" goes Thanks -
Hello I have a problem with rams, they are indicated as on the screen in Aida64, while it will have to be A1, B1, C1, D1 and I have the temperature of the water plugged into the "Water In" port on the motherboard, but it indicates Temperature N°1 in Aida64 It is possible to rename in "Water" (the "In" and "Out" to put in Extended Labels) and it's "duplicate" with T-Sensor 1 Asus having made the effort to add these ports, as long as they are named correctly in Aida64 And for Water Flow, in bios it is indicated in l/m, in Aida64 it is indicated in RPM Possible to have in l/m (see in l/h) in Aida64 Thanks And merry christmas
- 39 replies
-
- 1
-
-
- rampage vi extreme
- rampage vi
- (and 2 more)
-
Hello With the latest version 5.95.4500 & beta 5.95.4538, the temperature 2 and 3 are not shown in the monitoring (temperature only 1). Temperature 2 and 3 OK in the bios. Bios latest version 3701. With the previous version of the AIDA with the display of 3 temperature sensors there was no problem Thanks -
Hello It seems that Aida64 reads the VCCIN (CPU VRM) and not the Vcore for the 7940X (maybe with 7920X, etc...) It is missing the voltages for the "CPU VRM" and "Cache CPU" Thanks
