Jump to content
AIDA64 Discussion Forum
afj

Elitegroup CDC-I/D2550 mobo sensors

Recommended Posts

List of problems:

1. Voltage +12v exists in sensors page, but not listed in System stability test- voltages. (and probably +5v and +12v displays needs to be adjusted)

5f8ef2e4f5b5.jpgf28eb88f5d2b.jpg

2. As in my previous post(http://forums.aida64...ows-as-cpu-fan/), this mobo has two fan hardpoints, but if only one fan is installed, aida considers it as cpu's. So I perform a little investigation and made dumps for single cha, single cpu, and both fans installed. Cha fan's velocity is about 550rpm and cpu's - 1500.

CDC-ID2550-Report-sens-cha.txt

CDC-ID2550-isasensordump-cha.txt

CDC-ID2550-Report-sens-cpu.txt

CDC-ID2550-isasensordump-cpu.txt

CDC-ID2550-Report-sens-cha+cpu.txt

CDC-ID2550-isasensordump-cha+cpu.txt

Share this post


Link to post
Share on other sites

Thank you for the data. Can you please check what values does BIOS Setup report for +5V and +12V rails? That info will help us to calibrate voltage readings.

Thanks,

Fiery

Share this post


Link to post
Share on other sites

Unfortunately this mobo has neither overclocking abilities nor voltage monitoring/control in bios. Even "tweak" section contains only "spread spectrum" and "autodetect dimm/pci clk".

Share this post


Link to post
Share on other sites

Doesn't it have a PC Health Status or H/W Monitor page in the BIOS Setup? Even entry-level boards have that ;)

Share this post


Link to post
Share on other sites

PC health status contains:

fans speed

system temperature

cpu voltage (currently 1.192v)

dimm voltage (currently 1.520v)

(all unadjustable)

And link to fans control.

PS This mb is veeeery low level.

Share this post


Link to post
Share on other sites

Thank you, we've adjusted sensor information to suit your board. We've also removed the bogus +5V and +12V readings, since apparently your motherboard doesn't monitor those voltage rails. Make sure to upgrade to the latest beta version of AIDA64 Extreme Edition available at:

http://www.aida64.com/downloads/aida64extremebuild2267p3nb4ktwzjzip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works ;)

Share this post


Link to post
Share on other sites

Build 2267 tested. Great work. (Bogus?) +12v and +5v disappeared, but now we can monitor dimm voltage, which even corresponds to bios)). Also cha fan returns back.

Another difference over b2260's report is audio subsystem. Now it much lesser (although onboard audio turned off thru bios), all "core system" audio entries disappeared from new report.

Share this post


Link to post
Share on other sites

Thank you for the feedback.  If you consider the audio issue a potential bug in AIDA64, then please let me know what items are missing from which page of AIDA64?  Motherboard / Chipset page?  Multimedia / HD Audio page?  Or both pages?

Share this post


Link to post
Share on other sites

After a short investigation: it's a normal behavior of OS, not aida's bug.

Last time I launched some test programs: dxdiag, then aida b2260, then b2267.

It was found that dxdiag set up some "core system" audio drivers regardless of actual audio devices present or not, and after closing dxdiag, these audio drivers hanging in memory (and shown in system devices) for a short time.

So the first report was with these drivers, but while second one made, they were unloaded.

Without dxdiag "disturbance" different build's reports in a part of "windows devices" are exactly the same.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...