Hello,whenever I'm trying to run System Stability Test on Aida64 extreme and I check the "Stress GPU(s)" checkbox,the system crashes and I have to reboot my pc.Do you have any idea why? (when I run SST's with only GPU's box unchecked,it runs smoothly)
Also I'm trying to save the data from System Stability Test into a file (for instance .txt) but "Save" button only gives me a PNG image.Any ideas?
CPU - Ryzen 3 1200
MB - MSI B450M Gaming Plus
Video - Inno3D GTX 750 2Gb - 4 years
PSU - Chieftec CHP - 500A - 8+ years
MEM - Kingston HyperX KHX2666C16/8G 2 bars by 8Gb.
HDD - WDC WD1002FAEX-00Z3A0 (931 GB).
SYS - Microsoft Windows 10 Pro 1809 Build 17763.379
Bios last update. Default settings.
Sometimes Kernel-Power (41) mostly in games and tests Aida64.
Tests that I conducted (prime95(1 hour), OCCT(~40min), Memtest86(in bios (1 hour)), TestMem5), all is ok. Sometimes the sound hangs. As if the whole system hangs for ~0.2-0.4sec.
I was running a stress test on a my new Pc and within 2 mins of the test I get a hardware failure message. I've discovered that the test fails on the FPU stress test i'm kind of stuck on how to fix the issue
RYZEN 5 1400 (OC 3.7ghz)
ASUS B350I MOTHERBOARD
CORSAIR DOMINATOR PLATINUM 16GB 3000MHZ
EVGA 1080TI FTW3
Hi, I've met a issue with the FPU stress test, the system would crash instantly when I click the "Start" buttom
it was ok to run a solo CPU stress test over 2 hour, but I just dont understand why it went wrong when conducting the FPU test. Any Ideas?
I've attached a AIDA64 report of my mobo
CPU:7940x (1.15volt, OC 4.5ghz)
RAM:Gskill 8G*4 4266mhz c17 (I set the frequency at 2133)