Jump to content
AIDA64 Discussion Forum
avrion

Missing Sensor Items for AMD 7990

Recommended Posts

Hi,

 

I'm using an AMD 7990 and it seems like there are a few sensor items missing.

Before I go on, GPU sensor/fan support, Multi-GPU support and Wake GPUs up are all checked under the stability tab.

Furthermore I disabled ULPS via Msi Afterburner.

 

I'm building a Sensor Panel and I noticed that under Voltage Values I'm only getting Vcc, Memory, VRM and +12V for GPU2 and nothing for GPU1.

All i get for GPU1 is the core voltage.

Under Current Values and Power Values all i get is GPU2 Memory and GPU2 VRM (Amps. and Wattage respectivley).

 

Are these values really for GPU2 only or are they actually the total of both and are simply mislabeled?

Not a huge issue, just wondering.

 

regards,

Share this post


Link to post
Share on other sites

It's absolutely normal.  It's because the onboard sensor/PWM chip is connected to the I2C bus of GPU2, and not GPU1.  It's just a technical decision made by the video card manufacturer.  The chip itself may measure the properties and status of GPU2, GPU1 or the whole video board, it all depends on how the manufacturer designed the PCB of your video card.

 

Regards,

Fiery

Share this post


Link to post
Share on other sites

Hi Fiery and thanks for the quick answer.

Yesterday I only restarted the program to see if anything changes(which it didn't), today after restarting my pc, I now have all the missing GPU1 Voltage Sensors ... so, problem solved i guess :)

Great program btw.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By NaijaBushBoy
      In the bios and HWinfo64 I can check the Mos temps but I dont see that reading in Aida 64. Help pls?
    • By wONKEyeYEs
      I would like to know how to turn on a second unique Sensor Panel.
      I figure it must be possible as @Fiery said in 2013...
      "We do have plans about multiple SensorPanels,"

    • By nikkymen
      When you click the "Collapse All Windows" button (Win + D) on Windows 10, the SensorPanel is located behind the windows taskbar.
      PS.
      My SensorPanel has the options "always on top" and "prevent from being minimized".
      I`m using version AIDA64 Engineer 5.90.4229 Beta.


    • By avatar
      Hello. 
      I have been using AIDA 64 for a while mainly to keep an eye on temps, fan speeds and power consumption using the sensor panel. I have my computer power supply unit connected to an APC Smart UPS SUA-1500I and my monitors and HDTV, router and other stuff connected to an APC Back-UPS RS1500. Going to the power management section in AIDA64, I can see the wattages, voltages and other parameters of both UPS units, but I cannot add the wattage of the Back-UPS unit to the sensor panel. I can do so only with the smart UPS unit. Is there a way to add them both to the sensor panel and keep an eye on the total power consumption of my whole setup? 
      Thanks.
    • By Hitman_Agent_47
      Hi, 
      since 3 days i got a new graphics card (GTX 1080 ) since then some of the sensors in my Sensor panel just disappeared. The GPU Usage is gone , and the GPU clock is gone aswell .
       
      So i looked in the list with all sensors but there is neither a usage nor a gpu clock sensor, they just missing  
       
      With my old gtx 770 in 2way sli everything worked
       
      Aida64 is updatet and running with 5.70
       
      Pls Help
×
×
  • Create New...