Jump to content
AIDA64 Discussion Forum
Fiery

New LCD device support: Samsung SPF Digital Photo Frames

Recommended Posts

AFAIK none of them are produced anymore, so you cannot get them brand new anymore. The last series consisted of the 800P, 1000P, 800W and 1000W models. I'm not sure if the "W" version was a successor to the "P" version though.

Hi Fiery,

Is there any plan to support newer photo frames ?

The Samsung freezes too often.

Share this post


Link to post
Share on other sites

Hi Fiery,

Is there any plan to support newer photo frames ?

The Samsung freezes too often.

We would love to support any photo frames, but most of them simply do not support passing bitmap data over the USB connection, so we cannot support them.

Share this post


Link to post
Share on other sites

What about wifi or bluetooth screens ?

Please send us a link to a picture frame that supports such interface an can receive bitmaps via the wireless connection.

Share this post


Link to post
Share on other sites

Of couse ineed, any DVI-D lcd screen connected on my third dedicated physx card should make it (If windows does not mess the multi screen in game!

The beauty with that is that I can also add my solar control indications

Share this post


Link to post
Share on other sites

my samsung lcd panel stopped working after many months

The panel showed an error about low disk space, clear space before restart.

Problem is, none of my disks are low

Tried reboot, still doesnt come up, and the lcd panel screen says USB device not found

 

I tried reboot, tried reloading the libusb0 drivers.  Nothing works.

Latest aida64, spf-87h

And as I said, working for months, until the disk low message.

Share this post


Link to post
Share on other sites
4 hours ago, philhu said:

my samsung lcd panel stopped working after many months

The panel showed an error about low disk space, clear space before restart.

Problem is, none of my disks are low

Tried reboot, still doesnt come up, and the lcd panel screen says USB device not found

 

I tried reboot, tried reloading the libusb0 drivers.  Nothing works.

Latest aida64, spf-87h

And as I said, working for months, until the disk low message.

I suppose the internal flash storage of your SPF-87H may have died for some reason :(  It's quite surprising and also annoying that it prevents the whole thing from working though...

Share this post


Link to post
Share on other sites
On ‎2017‎. ‎03‎. ‎16‎. at 3:26 PM, shh200438 said:

When would SPF-83V be supported with aida64? now is 2017, would you update to support SPF-83V, SPF-85M?

As far as we know, SPF-83V uses a separate protocol that we know absolutely nothing about :( So we cannot support that, unless someone can provide us with the necessary programming guidelines for its protocol.

We don't have the USB device ID for SPF-85M.  Try to enable Samsung SPF LCD support on it, and after then try to issue an USB Dump by right-clicking on the bottom status bar of AIDA64 main window --> System Debug --> USB Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first.


Thanks,
Fiery

Share this post


Link to post
Share on other sites
10 hours ago, Fiery said:

As far as we know, SPF-83V uses a separate protocol that we know absolutely nothing about :( So we cannot support that, unless someone can provide us with the necessary programming guidelines for its protocol.

We don't have the USB device ID for SPF-85M.  Try to enable Samsung SPF LCD support on it, and after then try to issue an USB Dump by right-clicking on the bottom status bar of AIDA64 main window --> System Debug --> USB Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first.


Thanks,
Fiery

thanks very much for your reply.Now i can change it from storage to mini monitor, but can't send pic or data to show in spf-85M, How to find it's usb protocol?

Share this post


Link to post
Share on other sites
1 hour ago, shh200438 said:

thanks very much for your reply.Now i can change it from storage to mini monitor, but can't send pic or data to show in spf-85M, How to find it's usb protocol?

Please right-click on the bottom status bar of AIDA64 main window --> System Debug --> USB Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first.

In the USB Dump we will find the USB device ID of your device.  Then we can enable SPF support as a test, in order to check if it shares protocol with the already supported SPF devices or not.

Share this post


Link to post
Share on other sites

This has been working perfectly for me, until two weekends ago.  Did something change?

It runs, scrolling my pages, for about 30 minutes, then hangs on the 3rd page

If I exit aida64 and restart, it works for about 45 again.  Aida64 isn't hung, just the lcd screen udatpes.

 

Version 5.90.4242 beta, 5/19/2017.  I think it has happenned for about 2 weeks though

Share this post


Link to post
Share on other sites
11 hours ago, philhu said:

This has been working perfectly for me, until two weekends ago.  Did something change?

It runs, scrolling my pages, for about 30 minutes, then hangs on the 3rd page

If I exit aida64 and restart, it works for about 45 again.  Aida64 isn't hung, just the lcd screen udatpes.

 

Version 5.90.4242 beta, 5/19/2017.  I think it has happenned for about 2 weeks though

No, we haven't changed anything about it.  But we've already seen overheating issues about Samsung SPF devices.  So in case the ambient temperature got hotter around your device, that may cause the hangs after a period of time.

Share this post


Link to post
Share on other sites

Hello! The project with a photo frame has failed! It still freezes!
Created a new project called Sensor Front Panel Monitor (SFPM) based on a mini monitor that I built.

Works stably, the connection and power is via usb on the motherboard.
There were difficulties with using a multi-monitor system in windows. Loss of focus (when the full-screen 3D application was launched on the main SFPM monitor was turned off), as well as blocking the movement of the cursor between the two monitors.

I solved these problems using the displayfusion program.

 

 

2.jpg

3.1.jpg

5.jpg

4.1.jpg

Share this post


Link to post
Share on other sites
On ‎2017‎. ‎08‎. ‎17‎. at 0:18 PM, petrovv111 said:

Hello! The project with a photo frame has failed! It still freezes!
Created a new project called Sensor Front Panel Monitor (SFPM) based on a mini monitor that I built.

Works stably, the connection and power is via usb on the motherboard.
There were difficulties with using a multi-monitor system in windows. Loss of focus (when the full-screen 3D application was launched on the main SFPM monitor was turned off), as well as blocking the movement of the cursor between the two monitors.

I solved these problems using the displayfusion program.

 

1.jpg

2.jpg

3.1.jpg

5.jpg

4.1.jpg

Looks stunning, great job!

Share this post


Link to post
Share on other sites
On ‎2017‎. ‎12‎. ‎13‎. at 11:17 PM, ahiro said:

Is possible to monitoring PC on android smartphone (connected through USB)?

Yes, it's possible to monitor your PC from any web browser, running on any kind of device that has a web browser.  You can use the RemoteSensor feature for that purpose:

 

Share this post


Link to post
Share on other sites

Hello im here to ask for some help im a windows 10 user and i have a spf-87h i cant install the drivers for it cause i need a windows 7 computer but i only have  a windows 10 i need some help i dont want to use the picture frame for an extra monitor i just want to use it as my very own picture frame and add some pictures of family and stuff if you can provide a way to fix this i will much aprecciate it.

 

Share this post


Link to post
Share on other sites
5 minutes ago, btmouse said:

SPF-87H是在功率和菜单弹出时,必须选择一个。如何自动化?

 

AIDA64 is able to switch the frame to mini-monitor mode automatically.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By beada
      BeadaFrame Display Kit is an ARM Cortex-A7 development platform which bundled with a 7" TFT LCD Display. It can be powered and communicated with PC Host by a single Micro USB cable. Currently we use it as a secondary PC monitor for display of hardware status through Remote Sensor LCD.
      The question is --  is there any way to implement it as a native support of AIDA LCD screen? We are running Debian Stretch on the ARM Cortex-A7 core.


       
      And more details of this display kit:
      CPU
      NXP/Freescale ARM Cortex-A7 i.MX6ULL
      RAM
      512MB DDR3L
      Storage
      16GB/32GB eMMC
      Connectivities
      1 x WIFI 802.11 b/g/n module(AP6212) 1 x USB 2.0 Host(Type A) 1 x USB 2.0 OTG(Micro-USB) Display
      7.0" TFT LCD: 800x480 (AT070TN92) , w/ touch and bezel
      On Board Resources
      Reset Circuit with reset button 1 x Power select jumper 1 x Boot select jumper 1 x USER LED Dimension
      188 x 118 x 35(mm)
      Operating System
      Debian Stretch
      Consumption
      5V/350mA
    • By Shaman
      Dear all,
      I am trying to figure out the best option for a small (max 7'') external screen to use with SensorPanel.
      I find lots of options on eBay that I suppose are all viable (e.g., https://www.ebay.co.uk/itm/7inch-HDMI-LCD-H-with-case-1024x600-IPS-Capacitive-Touch-Screen-Audio-Output/133067577890).
       
      What I am unsure at the moment:
      - Is the quality/resolution of the screen important?
      - Is touch input needed/used?
      - Is there any difference (limitations) between the three available options (using an HDMI connected screen, a USB connected one and/or an affordable Android tablet)? 
       
      Any input would be appreciated. Thank you in advance!
       
      Best,
      S
    • By Ventilator
      Would be nice if you could rotate output 90 degrees in AIDA 64 LCD config for Logitech ARX.
      This, so you can get tablet mode.
       
    • By Roy
      Hi,
      it would be nice if there was the possibility to send sensor values unformatted as a number or percentage, via a serial port.
      Similar to the LCD displays, only without formatting, or pure numbers with separators.
      Together with a small GUI.
      Background is the simple evaluation of the data with a microcontroller and display in different ways.
      I imagine not only LCD or OLED, but rather seven segment display, nixi tubes or an analog pointer display. That would create a lot of possibilities.
    • By Wampo
      Hey Aida Team,
      i have some issues with this Adafruit LCD wich is recomended. On the two Pictures you can see what aida should do and what can i see on the Display. The First line is completely erased and the screen is flickering. The Adafruit Backpack is set to 20x4 LCD. When the Display is updating you can see the right setting for a millisecond.
      But if i change the LCD Setting in AIDA to 16x2, and leave the Backpack in 20x4 mode,  the Screen isn flickering and the first line is there. I think you got a little problem with the 20x4 Driver. I have Searched for the code but i cant find it, to edit it if i found the failure. 
       
      Please give me response for this BUG. I have extra ordert this overpriced 50€ LCD for it. 
      Greetings Daniel from Germany


      VID_20181129_160917.mp4
×
×
  • Create New...