Jump to content

New LCD device support: Samsung SPF Digital Photo Frames


Recommended Posts

Thank you for the videos. Quite frankly, we've never seen such issues to happen about external LCD displays, and my first thought was that it must be due to a hardware failure or USB communication issue. Maybe under heavy load the USB interface is not passing the whole JPEG image properly from AIDA64 to the SPF -- but that's just pure speculation.

Link to post
Share on other sites
  • Replies 393
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

To all users of SPFs: I found the way how to control SPF brightness. I found the way how to switch back to storage mode after AIDA exit (however developer already knew it). I send this to developer

Would be great to add it next to the jpg 0-99 field ^^

Try to lower the compression setting even more, and see if it helps. As for the LibUsb drivers: you can only install them when the SPF device is in mini-monitor mode. Try to remove the Samsung drive

Posted Images

I will bring the usb analyzer from work to check if packets get corrupted when this occurs.

Are the packets send at constant rate using iso, or are you using bulk/interrupt ?

We only have control over the actual USB protocol as long as you're using our Samsung SPF drivers based on LibUSB. If you use Samsung's own mini-monitor driver, then USB transactions are controlled and governed by Samsung's driver.

Link to post
Share on other sites

Ok I see that you are using the bulk transfer, with 512 bytes.

The pc sends 512 bytes every micro frame (that's every 125 us in high speed mode).

The samsung photo frame cannot accept more data, it pings the rest till the next uframe.

Sometime it is able to accpet two packets per uframe.

 

 

see below:

 

aida64_samsung_photoframe_a.png

 

I will now try to see what happens when there is lcd corruption.

Link to post
Share on other sites

Ok I found the problem,

the corruption occurs when the data picture exceeds 262KBytes.

 

Can you propose to the user in aida64 to set the jpeg compression level to avoid this situation ?

 

This depends of the picture that has to be drawned (type of graph/colors and so on).

 

The problem is not due to the time to send the picture (188 ms for 327 KBytes, wich is way below 5000 ms)

 

aida64_samsung_photoframe_b.png

Link to post
Share on other sites

Hi, Could add this feature to AIDA64: Pool for the presence of the samsung lcd every minute or so when it was not detected before.

I'm asking that because right now when I start windows, aida64 auo starts, but If I forgot to power the lcd before, it will never display anything,

I have to close aida64 and re start it again.

 

Edit: Thanks for the last beta, I can see a correct cpu package temperature now, on the x99 5930k.

Link to post
Share on other sites

Hi, Could add this feature to AIDA64: Pool for the presence of the samsung lcd every minute or so when it was not detected before.

I'm asking that because right now when I start windows, aida64 auo starts, but If I forgot to power the lcd before, it will never display anything,

I have to close aida64 and re start it again.

I'm afraid AIDA64 LCD module doesn't support that.

 

Edit: Thanks for the last beta, I can see a correct cpu package temperature now, on the x99 5930k.

Thank you for the feedback.

 

the CPU throtling is not working on x99/5930k cpu.

The intel extreme tuning tool is reporting well the throttling's (power/current/thermal).

I'm not sure if you're talking about the classic Intel CPU throttling value there. Throttling is a single percentage value that shows if the CPU is overheating at any given time. If you mean a different throttling value, then please show us (with a screen shot or a link) what you mean.

Link to post
Share on other sites

I'm talking about the thottling that is supported on new cpu/chipset, that controls not only the max temp but also

the max power, the max current. This is all controllable in the bios of x99 platforms.

 

See below a screenshot of the intel extreme tuning utility that shows them being triggered by OCCT heavy test.

 

thottling.png

Link to post
Share on other sites
  • 2 weeks later...

Is this the update ?

 

PowerAdjust 2, PowerAdjust 3 sensor devices support[/size]

That is one of the new improvements of AIDA64 v5.20, but I'm not sure in what way would it be related to your computer.

Link to post
Share on other sites

Hello,

 

I cannot find where the preference file of aida64 is located.

 

I would like to just pick back my lcd settings after re-installing windows.

 

Could you help me ?

Preferences settings are stored in the AIDA64.INI file that you can find in the AIDA64 installation folder. You can also use the Export button on the LCD Items page of the Preferences to backup your LCD settings.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By Rich83
      hi all, newbie here! this is my first post so i hope it has landed in the correct place..  be gentle!

      i have installed the 'simple' version of a64, is it possible to run multiple instances of the sensor panel? i have the sensor panel running in a 5 inch screen located inside my case but have a room change planned which will put the case high on a shelf out of my eye sight so i would like a second display for stats placed under my main monitor. i plan to use a larger screen say a 10.1 'ultrawide (if thats the correct term) as i like the extra real-estate. what are my options?
      on a similar topic, is it possible to create an 'unpublished' senor panel before removing the currently used panel? or would i have to save the current panel to file or something then start a new panel?
      also can anyone point me to gauge resources, ie pre made gauges? or an easy to understand tutorial for how to diy them? total novice here, but can follow an idiots guide!

      i have included the final evolution of my first attempt using the provided gauges etc, it took me ages to get rid of the green dials.. i finally gave up trying to figure it out in a64 so i just changed the hue on the 5inch monitor lol. really hoping to learn the skills to create something like i have seen on here.. some really nice work on the share your panel thread, some of those must have taken ages!!! impressive. 
      any advice greatly received, but remember your talking to an a64 absolute novice!!
      Thanks folks. 




    • By -Vulture-
      Hey guys!
      Im hoping for some input regarding my question. I saw, AIDA64 is supporting a lot of different displays and interfaces. Now which one to choose? Heres some more input from me about what im looking for:
      [Mandatory] 5-8 inch LCD display [Mandatory] only USB powered [Mandatory] black frame design to match my case, if possible [Optional] A flat, not too thick one [Optional] small bezels if possible [Optional] No buttons neccessary, i want to place it inside of my case. [Optional] an internal USB connector to directly connect it to the motherboard At the moment im using some Aquacomputer Vision OLEDs which are working fine. But i can already see some burn in and they are pretty small. Since theres no LCD coming from Aquacomputer anytime soon, im thinking about using AIDA64 to get my data on screen. I have 3 of those OLED on each of the drive bay covers, this is more or less the space i have available
      I have attached a screenshot of the system with the OLEDs and their current placement for you to visualize.
       
      Thank you for your suggestions!


    • By Koithim
      Hey there,
      Installed the new card but i do not see all the sensors, like i did on my 2080 ti.
      Also, when the GPU is idle (low clock) the GPU Clock field on my sensor panel and LCD appear and disappear sometime. Also,
      app takes way longer to load.
      If any logs are needed just let me know.
      Cheers!
      K
       
    • By Renrut23
      Hey, new to Aida64 so be gentle,
      I have 2 Raspberry Pi 7" touchscreen display. One has a pi connected to it and the other is just the panel. The panel has just a usb port and a micro usb port. What's the easiest way to get this up and running as an external monitor? I've been running ModBros but I'm looking for something more customizable. 
       
      Also, other then the one forum post, is there anywhere to get templets to get a start from and build off of that?
    • By Fiery
      The new AIDA64 release introduces monitoring of sensor values on El Gato Stream Deck LCD and SteelSeries OLED displays, and supports the latest AMD and Intel CPU platforms as well as the new graphics and GPGPU computing technologies by both AMD and nVIDIA.
               
      AIDA64 for Huawei devices
      AIDA64 for Android is creeping up on crossing the 10 million download mark at the Play Store. It is also available now in the Huawei AppGallery, a blooming app store that offers automatic updates and various security features.
      New features & improvements
      - Aqua Computer Octo sensor support
      - Preliminary support for Intel “Elkhart Lake”, “Jasper Lake”, “Rocket Lake” CPUs
      - Art.Lebedev Optimus Popularis, El Gato Stream Deck LCD support
      - SteelSeries Apex 7, Apex Pro OLED display support
      - Improvements for Intel Z490 chipset based motherboards
      - SMBIOS 3.4.0 support
      - GPU details for AMD Radeon RX 590 GME, Radeon RX 5600 XT
      - GPU details for nVIDIA GeForce GTX 1650 Ti, GeForce MX330, GeForce MX350
      What's new since AIDA64 v6.00
      - SHA3-512 cryptographic hash benchmark utilizing AVX, AVX2 and AVX-512
      - AVX-512 accelerated benchmarks for Intel “Ice Lake” processors
      - AVX2 and FMA accelerated 64-bit benchmarks for AMD Zen 2 “Matisse” and “Renoir” processors
      - AVX accelerated 64-bit benchmarks for Zhaoxin ZX-C+ and Zhaoxin KaiXian KX-5000 processors
      - Microsoft Windows 10 November 2019 Update support
      - BeadaPanel, EVGA Z10 RGB, Matrix Orbital EVE3 LCD and SteelSeries Rival 710 OLED display support
      - Corsair H100i Platinum and H115i Platinum liquid cooler sensor support
      - Enhanced RGB LED monitoring module
      - Cooler Master MP750 RGB LED mousepad support
      - Corsair Obsidian 1000D, EVGA iCX2, Farbwerk 360, NZXT GRID+ V3 sensor support
      - Full support for Hygon C86 “Mukti/Dhyana” CPU
      - Improved support for 3rd generation AMD Threadripper processors
      - Preliminary support for 4th generation AMD Ryzen desktop CPUs
      - Improved support for Intel “Comet Lake” and “Ice Lake” CPUs
      - Improvements for AMD X570 chipset based motherboards
      - Support for PCI Express 4.0 controllers and devices
      - Preliminary support for Zhaoxin KaiXian KX-6000 CPU
      - Advanced support for LSI RAID controllers
      - NVMe 1.4 support
      - GPU details for AMD Radeon RX 5500, Radeon RX 5700, Radeon VII Series
      - GPU details for nVIDIA GeForce GTX 1600, GeForce RTX 2000 Super, GeForce RTX 2060 Series
      - Fixed lockup at startup on systems with multiple CPU groups
      - Retired SHA1 and VP8 benchmarks
      [ Press Release (English) ]
      [ Press Release (italiano) ]
      [ Press Release (magyar) ]
      [ What's new in AIDA64 v6.25 ]
      [ Download ]
×
×
  • Create New...