Jump to content
  • Similar Content

    • By Glowing1196
      Why the CPU benchmark can't support Xeon 6248R?
       

    • By Bjoern_GMX
      Please add the CPU readings of:
      Fclk, Uclk, Mclk 
      and makes us able to add them to the sensor panel.
      As well as:
      Gpu memory Temperature
      Of AMD Radeon RX6000 series.
       
      With HWinfo i can read/log them.
      But why not with AIDA?
       
      Cheers
      Bjoern
    • By ValinHawK
      Hello, AIDA64 Engineer is not seeing my RAM sticks and their temperatures.  Mobo is new ASUS Crosshair VIII Dark Hero.  RAM is 4x8GB of Crucial Ballistix DDR4 with RGB.  CPU is Ryzen 9 5950X.  GPU is MSI RTX3090 SUPRIM X.  The RAM and their temperatures are showing up in HWInfo and other stat software app's.  Any suggestions?
      Kind regards,
      ValinHawK
    • By Alvaro BaSa
      Hi, I have never had any issues with my pc in the last 2 years. I currently own a i7-9700k, 32 gb of 3200 Ram, Gtx 1080 ti 11GB, Nzxt Kraken X52, Aorus z370 Gaming 3 Motherboard (latest f15b drivers), 4 120mm cpu fnas for intake and 2 for outake. I currently run my cpu at 4.6-4.7 all cores, no extra OC. PSU 850 80 plus Gold
      So my usual temps are around 35c on idle and 65-75c under load. The other day I notices after a session of gaming that my cpu max temps had gone up to around 85c. It was weird as it had never happened. So I decided to do a couple stress tests to monitor results. So first I tested Linpack and at about 7 min through the test the cpu frequency dropped to 800mhz for a second and went back up to 4600. Cpu was under 100% load and temps where as high as 90-98c.
      So I ran Aida64 and after about 10 min the same thing happened. Only with Aida the temps weren't that high. Gpu temps where stable across the board, no issues whatoever.
      So I am no expert, and I need help as to why this may happen.
       
      Thanks in advance for any help and let me know if there is more info I can provide.



    • By Joefbi4
      Hi, I am sorry if this topic is already here.
      About memory card..either internal or external, details in Aida64.
      Can we see details for memory e.g maker (manufacturer), speed, serial number etc? As for now i think we can only see capacity.
      Sorry again if i missed look about that function in the apps, but already check, none available.
       
      Thank you dev for the great apps.
×
×
  • Create New...