Jump to content
AIDA64 Discussion Forum
VTOLfreak

fixed: ECC supported but disabled (Skylake IMC)

Recommended Posts

Hi guys, I put together a system with ECC memory but AIDA64 is showing ECC as supported but disabled.

 

CPU: Xeon E3-1275V5

Motherboard: ASRock E3V5 WS (latest BIOS: 1.40)

Memory: Crucial CT2K16G4WFD824A 2x16GB DDR4-2400 ECC UDIMM

 

I have a CPU that supports ECC, ECC memory and a motherboard with a chipset that claims ECC support but doesn't mention ECC anywhere in the BIOS. So, is AIDA64 wrong and is ECC actually turned on? Or did ASrock screw up in the BIOS somewhere? Any other ways to check if ECC is enabled? I disabled the BIOS startup screen to watch it bootup but that didn't give any info on the memory detected. I attached the hardware report from AIDA64 if you guys want to take a look.

Report.htm

Share this post


Link to post
Share on other sites

Thank you for the report. It seems the Skylake IMC ECC state detection method that AIDA64 currently uses isn't the proper one. We'll try to find a new method and get back to you soon in this topic.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By fads
      Hello,
      Can someone please help me. I've just installed AIDA64 on my Asrock DeskMini 110 (motherboard H110M-STX) and some of the voltages are missing. Is it possible to fix this. Appreciate it..
      isasensordump.txt
      smbusdump_full.txt
    • By Chris77
      Hello! With the Asrock Taichi X299 XE, all fans are showing up in AIDA64 except only the CPU optional fan Speed! I'm already using the latest Beta of AIDA64! In Asrock A-Tuning utility all fans are showing up! It would be great, if you can make the CPU optional fan showing up also in AIDA64! ;-) Many thanks!
       
       

    • By ringo
      In Aida64 +5V standby voltage is reported as +5.261. Tolerance is:
      +5Vsb tolerance
      ±5% - from +4.75V to +5.25V
      Should I be worried?

    • By scomcomputers
      Hi.
      Aida 64(Engineer, v.5.92.4350 Beta),does not show properly cpu core voltage,on ASRock X370 Gaming X motherboard.
      Please fix it,in the next version.
      Thank You!
       
       

    • By pavas
      Hello
      I have skylake c236 motherboard + xeon processor + ECC UDIMM memory
       
      I run "best practices analyzer" scan on hyper-v role on windows server 2012r2
      And got error
       
      Title:Use RAM that provides error correction
      Severity Error
      Problem: The RAM in use on this computer is not error-correcting (ECC) RAM.
      Impact:Microsoft does not support  on computers without error-correcting RAM.
       
      Then I tryed AIDA latest beta (from this topic https://forums.aida64.com/topic/3404-fixed-ecc-supported-but-disabled-skylake-imc/)
       
      DMI
      [ Memory Arrays / System Memory ]  
         Memory Array Properties:  
         Location   Motherboard  
         Memory Array Function   System Memory  
         Error Correction   Single-bit ECC  
         Max. Memory Capacity   64 GB  
         Memory Devices   4  
      [ Memory Devices / DIMM_A1 ]  
         Memory Device Properties:  
         Form Factor   DIMM  
         Type   DDR4  
         Type Detail   Synchronous  
         Size   16 GB  
         Max. Clock Speed   2133 MHz  
         Current Clock Speed   2133 MHz  
         Total Width   64-bit  (my note, this value must be 72-bit for ECC module)
         Data Width   64-bit  
         Ranks   2  
       
         SPD
       [ DIMM1: Samsung M391A2K43BB1-CPB ]  
           Memory Module Properties:  
         Module Name   Samsung M391A2K43BB1-CPB  
         Serial Number   322136A0h (2687902002)  
         Manufacture Date   Week 15 / 2016  
         Module Size   16 GB (2 ranks, 16 banks)  
         Module Type   Unbuffered DIMM  
         Memory Type   DDR4 SDRAM  
         Memory Speed   DDR4-2133 (1066 MHz)  
         Module Width   72 bit  
         Module Voltage   1.2 V  
         Error Detection Method   ECC  
         DRAM Manufacturer   Samsung  
         DRAM Stepping   00h  
         SDRAM Die Count   1  
       
      Chipset
       [ North Bridge: Intel Skylake-S WS IMC ]  
            Error Correction:  
         ECC   Supported, Enabled  
         ChipKill ECC   Not Supported  
         RAID   Not Supported  
         ECC Scrubbing   Not Supported  
       
      Please answer, ECC is full enabled? Why windows server thinks it is not enabled?





       
×
×
  • Create New...