Jump to content

Upgrading To Gigabit Ethernet - Taxing overclock

Recommended Posts

I have a computer in a setting with 6 monitors show video (Sometimes 4k is in the mix) and the video is over network share.


The video was choppy and i realized that my network was getting pegged at 100mb.   I ran all new wires and made sure everything was on gigabit Ethernet.  Now it is much smoother.


The problem now is that my slightly overclocked computer hangs sometimes.  I believe it's because the machine is getting taxed with the flood of new data from the ethernet card and it didn't have to work so hard before.


The question i have is, Do you believe this would be because of the overclocking on the CPU or because one of the video cards is old?


I have an older video (NVS 450) card and a new card (Radeon R9 390).


Trying to narrow this down.  Thanks for any expertise.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By pimp1310
      my native language is german, i hope my english is understandable.
      The Problem is, when i use my "aorus Graphic Engine" to control my 1080TI's leds, doesnt works anymore when i have aida64 in autostart.
      when i delete aida654 in my autostart the "Aorus graphics engine" works well.
      I tried to make a delayed start of aida64 but this didnt work.
       i need both programs, aida for my sensorpanel on the second screen, and aorus graphics engine to control my graphics card.
      any ideas ?
    • By RealCybertron
      I bought  my PC recently, and I noticed that my system temperature is pretty high. I ran multiple tests with AIDA 64, HWInfo and HWMonitor and they all showed some problems which I do not know to solve on my own.
      First of all, my CPU voltage is not stable and can go very very high. For example while playing some games, the voltage hits up to 1.5V and so the temp hits for about 72C. I'm using a stock Spire cooler so this is very dangerous. I tried to change my CPU voltage in my motherboard to 1.2V but to no avail. My PC started, it loaded up my config and the screen turned off while the EZ debug led lighted up.
      I never tried overclocking but I changed the curve of my GPU fan speed, as it was also getting hot during gaming. 
      One last thing, a small red led is always lit up between my CPU socket and RAM. I asked about its purpose to a technician and he said to me that it shows that my motherboard is getting power. I thought it was a little bit ridiculous and I still don't know its purpose. Maybe it's an indicator for over voltage?
      My specs: Ryzen 1500x with Spire cooler
      GTX 1080 graphics card
      8x2 2400 mhz ram
      MSI b350 mortar motherboard
      650w 80+ power supply
      Windows 10 as OS
      I can provide pictures of my system and its benchmarks/monitoring
    • By David Schwarz
      The list of comparison systems in the benchmarks is very interesting. Here it is not known what kind of graphics card is installed in the systems. Is there a list of the installed GPUs?
    • By rebelic
      I built my PC a couple days ago. I have:
      i5 4690k (cm hyper 212 evo cooled)
      GTX 970 (reference card)
      8gb ram
      I have been gaming on it pretty heavily since I've had it. I feel like I can get more out of the CPU because I did buy an
      MSI Z97-G45 Motherboard and a 4690k.
      So I overclocked it to about 4.4ghz with 1.2v
      I've been running the stress test with aida64 trial and my temps are a bit confusing to me.
      So Idle I have around High 30's to Low 40's (degrees Celsius)
      But, with the stress test being running for about 17 minutes now i'm getting Mid to high 60's (66-69) It rarely hits 70
      Oh and I don't think my fans are running too fast
      So are these normal temps? How long should I keep this test going? And should I keep it overclocked? Thanks
  • Create New...