Jump to content

AIDA64 compatibility with AMD Ryzen processors


Fiery
 Share

Recommended Posts

Due to the enermous number of requests we've been receiving since the Ryzen market launch, concerning various confusions about AIDA64 and Ryzen, hereby we post a clarification. AIDA64 is currently not 100% compatible with the recently unveiled AMD Ryzen high-performance x86 processors. It's because AIDA64 still has a few issues that we need to fix. However, in order to fix those issues, we first need to run a series of very long benchmark tests on Ryzen, and that -- among with the bug fixes themselves -- will take several days to complete.

As for the bugs and limitations we so far discovered:

UPDATE: We have fixed #3, #4, #5 and #7 in the latest AIDA64 v5.90.4200 stable update, which is now 100% compatible with AMD Ryzen processors:

https://www.aida64.com/downloads/latesta64xe

1) A number of minor hardware detection issues were already fixed in the latest AIDA64 beta update.

2) The list of Turbo and XFR PStates are invisible on Ryzen, so it's not possible to properly enumerate or track them using a software. When a core of the AMD Ryzen processor goes into idle, the core will report the clockspeed of the P2 power state (e.g. 2200MHz on the Ryzen 7 1800X) and enter into the core-c1 (CC1) or core-c6 (CC6) sleep state. While the VID remains detectable in these states, the states are power gated and the true frequency is not known to the OS or monitoring utilities. As indicated from the “fine-grained Pstate” commentary released at Ryzen Tech Day, the AMD Ryzen’s processor true frequencies in these modes are significantly lower than reported via the “last known” P2 reading. AMD engineering tells us that V/f changes can be executed at 1ms intervals, indicating that the act of monitoring the states with the resolution necessary to accurately capture this behavior would also prevent cores from entering into the ultra low-power CC1 or CC6 states.

3) L1 cache bandwidth and latency scores, as well as memory bandwidth and latency scores are already accurately measured.

4) L2 cache and L3 cache scores indicate a lower performance than the peak performance of Ryzen. The scores AIDA64 measure are actually not incorrect, they just show the average performance of the L2 and L3 caches rather than the peak performance. It will of course be fixed soon.

5) Even though AIDA64 warns about a potential lack of optimization, the CPU and FPU benchmarks should be indicative of the full potential of Ryzen. We may be able to tweak e.g. the FPU Julia benchmark to squeeze even more performance out of Ryzen, but we don't expect the improvement to be substantial.

6) The CPU Hash benchmark provides an exceptionally great score on Ryzen due to the hardware accelerated SHA instructions capability of Ryzen. It's absolutely normal that hardware acceleration boosts CPU computing performance by such a margin.

7) AM4 motherboards are not yet supported by the latest AIDA64 stable build of v5.80.4000. Make sure to use the latest AIDA64 beta build to have accurate sensor measurements on ASRock, Asus, Biostar, Gigabyte, and MSI AM4 motherboards.

We will post further updates to this topic as we progress with our bug fixing efforts on our Ryzen test systems.

Link to comment
Share on other sites

On ‎2017‎. ‎03‎. ‎12‎. at 11:38 AM, skline00 said:

Thanks administrator. The beta is working well on my Asus Prime B350 Plus mb with Ryzen 7 1800x at stock. If I OC I lose the temp readings under stability testing.

Which temperature readings go missing when your CPU is overclocked?

Link to comment
Share on other sites

On ‎2017‎. ‎03‎. ‎12‎. at 3:45 PM, Sgt Bilko said:

Hi Fiery,

Is the stress test still fine to use with Ryzen processors?

Yes, it works fine.  Although, we're not quite sure if you can trust the CPU Package power reading.  It seems to provide strange readings, even though we use it the right way.

  • Like 1
Link to comment
Share on other sites

28 minutes ago, Fiery said:

Yes, it works fine.  Although, we're not quite sure if you can trust the CPU Package power reading.  It seems to provide strange readings, even though we use it the right way.

Thank you for the answer, good to know the stress test works as it should :)

Link to comment
Share on other sites

8 hours ago, Evo086 said:

Beta is working good so far with my Asus x370-pro.  Not sure if you saw this? https://community.amd.com/community/gaming/blog/2017/03/13/amd-ryzen-community-update?sf62109582=1.  Was wondering if the temp readings will get adjusted in the next release?

Thanks

We're not 100% sure that AMD is right about that chart. So we're holding off applying a fix, and asked AMD for more information and clarification. You can however apply the -20 Celsius offset if you want: go to AIDA64 / main menu / File / Preferences / Hardware Monitoring / Correction, press the New button below the chart, select CPU Diode from the list of temperature readings, leave Ratio at 1, enter -20 into the Offset field, and press OK. You will need to remove that correction entry once we implement a native fix in AIDA64 for the tCTL offset issue.

Link to comment
Share on other sites

  • 2 weeks later...

so is the cpu socket temp still off that 20 degree offset .....i tested the temp of my crosshair vi hero with a temp gun around the socket their is no way its 54c while cpu is in the low 20's...lol....i still put the -20 offset on the cpu socket or if that is the socket ....just says cpu on this ...but i started with my old 8350 sensor panel ....cpu diode is thee two clusters? and the cpu is the socket or entire package both clusters together?....... that pics just showing off the look

my sensor panel.PNG

Link to comment
Share on other sites

  • 1 month later...
On ‎2017‎. ‎04‎. ‎07‎. at 6:50 PM, Demoniacstar said:

so is the cpu socket temp still off that 20 degree offset .....i tested the temp of my crosshair vi hero with a temp gun around the socket their is no way its 54c while cpu is in the low 20's...lol....i still put the -20 offset on the cpu socket or if that is the socket ....just says cpu on this ...but i started with my old 8350 sensor panel ....cpu diode is thee two clusters? and the cpu is the socket or entire package both clusters together?....... that pics just showing off the look

We follow AMD's requests and recommendations on the -20C temperature offset for the CPU Diode (Tctl) temperature reading on Ryzen 7 1800X, 1700X and 1600X parts. Ryzen processors feature only a single thermal diode, and I assume it's located outside the CCX'es, in the uncore part of the CPU. The temperature reading labelled simply as "CPU" is measured by the motherboard sensor chip.

Link to comment
Share on other sites

15 hours ago, Fiery said:

We follow AMD's requests and recommendations on the -20C temperature offset for the CPU Diode (Tctl) temperature reading on Ryzen 7 1800X, 1700X and 1600X parts. Ryzen processors feature only a single thermal diode, and I assume it's located outside the CCX'es, in the uncore part of the CPU. The temperature reading labelled simply as "CPU" is measured by the motherboard sensor chip.

so one could say it is socket temp then?....and i think sence this is a external mb sensor and using the -20 degree rule and it matches my temp gun even on the back of cpu socket i will stay with that set up then...and keep the cpu temp sensor labeled socket ;)

i would also like to say thanks for the great work you guys are doing with your program ...i love it .....and everyone i turn on to this program loves it as much as i do ;)

awesome work guys ....

Link to comment
Share on other sites

 

On ‎2017‎. ‎05‎. ‎09‎. at 3:28 AM, Demoniacstar said:

so one could say it is socket temp then?....and i think sence this is a external mb sensor and using the -20 degree rule and it matches my temp gun even on the back of cpu socket i will stay with that set up then...and keep the cpu temp sensor labeled socket ;)

i would also like to say thanks for the great work you guys are doing with your program ...i love it .....and everyone i turn on to this program loves it as much as i do ;)

awesome work guys ....

I appreciate your kind words.  We'll keep pushing the development of AIDA64 in order to deliver more quality releases in the future too.

As for socket temp... well... I'm not quite sure how to label these things :) We generally recommend watching all CPU related temperatures, and use the highest one as your reference.  With Ryzen "X" (XFR-capable) processors cooling is crucial, so it's worth experimenting with various system loads, and watch and log all the temperatures during a certain workload to find out whether the current cooling solution can and should be improved.

Link to comment
Share on other sites

  • 2 months later...
On 07/04/2017 at 5:50 PM, Demoniacstar said:

so is the cpu socket temp still off that 20 degree offset .....i tested the temp of my crosshair vi hero with a temp gun around the socket their is no way its 54c while cpu is in the low 20's...lol....i still put the -20 offset on the cpu socket or if that is the socket ....just says cpu on this ...but i started with my old 8350 sensor panel ....cpu diode is thee two clusters? and the cpu is the socket or entire package both clusters together?....... that pics just showing off the look

my sensor panel.PNG

Hi I really love your sensorpanel theme. I have the same motherboard and cpu and was wondering if you could upload your sensorpanel files so that I can import and use them for mine. Thanks x

Link to comment
Share on other sites

  • 3 weeks later...
On 7/25/2017 at 9:59 AM, VRBabe16 said:

Hi I really love your sensorpanel theme. I have the same motherboard and cpu and was wondering if you could upload your sensorpanel files so that I can import and use them for mine. Thanks x

im sorry i no longer have that sensor panel ....if i can find it in my backed up data ill hook you up......i recently formatted all my drives and i'm in the processes of redoing a new sensor panel.....i do not know how it is going to turn out but ill let you see that also ......my sensor panels are created to run on a 24" 1080p monitor in portrait mode, i run 2 of those and a 55" 4k screen... i do still have my old one for my 8350 which is the same as this just things added for the 1800x....its not hard at all to create one of these panels it can be intimidating at first...lol...but things become pretty easy to do after you spend some time on it and learn it :) ..ive seen some awesome sensor panels!...way better then mine...lol...

Link to comment
Share on other sites

On 7/25/2017 at 9:59 AM, VRBabe16 said:

Hi I really love your sensorpanel theme. I have the same motherboard and cpu and was wondering if you could upload your sensorpanel files so that I can import and use them for mine. Thanks x

hey how you doing ...i am working on a new one ...this is what i got so far ...but i don't know if any will like it like they did that old 

k ...its done .....well mostly ....i might add some more system info to the center

HELP!! i can not stop adding stuff

 

 

 

 

 

 

 

a work in progress.PNG

Link to comment
Share on other sites

On ‎2017‎. ‎08‎. ‎15‎. at 7:53 AM, Demoniacstar said:

hey how you doing ...i am working on a new one ...this is what i got so far ...but i don't know if any will like it like they did that old 

k ...its done .....well mostly ....i might add some more system info to the center

HELP!! i can not stop adding stuff

 

 

 

 

 

 

 

a work in progress.PNG

Holy cow :D 

  • Like 1
Link to comment
Share on other sites

17 hours ago, Fiery said:

Holy cow :D 

lmao!....from the looks of that ...yeah id say Ryzen is 100% compatible with AIDA64.....i love this program and this sensor panel ..... why look at boring system data sensors man .....the customization of the sensor panel is unlimited pretty much!....the minds the limit ....truly!..........

thanks man!, for all the hard work you and your team put into this program ;)

Link to comment
Share on other sites

12 hours ago, Demoniacstar said:

lmao!....from the looks of that ...yeah id say Ryzen is 100% compatible with AIDA64.....i love this program and this sensor panel ..... why look at boring system data sensors man .....the customization of the sensor panel is unlimited pretty much!....the minds the limit ....truly!..........

thanks man!, for all the hard work you and your team put into this program ;)

Thank you, we'll try to keep it up ;)

Link to comment
Share on other sites

  • 1 month later...
10 hours ago, Soul--Reaver said:

When will we start seeing Ryzen results in the benchmarks?

I want to compare my current processor to a Ryzen one but i could not find any Ryzen results in Aida64 5.92

Hi

There is a Ryzen 1800X in the results just update your AIDA64 to the latest beta version.

 

Link to comment
Share on other sites

  • 2 weeks later...
  • 4 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Similar Content

    • By TheNope
      Hi everyone,

      Here are the specs,

      Aorus Master x570
      Ryzen 9 5900x @ 4GHZ
      4 sticks of 8gb Trident Z Neo @ XMP 3733MHz
      Aorus Master RX 6800XT (not overclocked but sometimes I enable the rage mod in WARZONE)

      Corsair HX850i

      At idle temps are amazing GPU 29-36, CPU 35-40
      While gaming 45 - 65(rarely) GPU 55 - 70 (70+ rarely depending on the game)

      BUT, PCH diode almost never goes below 70, and when gaming goes around 80-82

      I am trying to figure out why my pc does random restarts, so thinking this could be one of the problems. Initially I thought it's a PSU problem and needed an upgrade so temporarily disconnected few RGB accessories, dropped CPU 4.2 to 4GHZ and 3800MHz to 3733MHz not to stress my PSU until I get a 1000W. Haven't had any restarts for almost 2 months, today had 3 restarts in one day. PSU is 5 almost 5 years old. All other parts in PC are less than a Year old. Any suggestions or ideas are welcome and thank you in advance for the time:)
    • By ruineves1994
      Sometimes when stopping stability tests I got a Window popping up an error like "ACCESS VIOLATION IN MODULE AIDA 64.EXE , access violation at address aida64 1efa0174" and I can only close the aida 64 by task manager after that .
      I think my computer is stable , at least it seems to be ... 
       
      PC specs :
      AOC monitor with 21" and freesync , 75hz
      Gigabyte b450 gaming X
      AMD Ryzen 5 3600
      Kingston HyperX FURY DDR4 (with RGB) at 3200mhz with XMP profile 1 enabled
      XFX RX 580 GTS XXX 4gb
      Bitfenix formula gold 550w
      3 hdd´s from WD , 1 wd green , 1wd black ,1 wd blue
      1 ssd ( kingston a400 120gb)
    • By Fiery
      The new AIDA64 update introduces support for AMD Epyc 7003 Series processors, monitoring of Corsair RGB Pro XT sensor values, and supports the latest AMD and Intel CPU platforms as well as the new graphics and GPGPU computing technologies by both AMD and nVIDIA.
            
      AIDA64 for Huawei devices
      AIDA64 for Android has crossed the 10 million download mark at the Play Store. It is also available now in the Huawei AppGallery, a blooming app store that offers automatic updates and various security features.
      New features & improvements
      - Enhanced support for AMD Epyc 7003 “Milan” CPU
      - SteelSeries Apex 5 OLED display support
      - Aqua Computer High Flow Next sensor support
      - Monitoring of Corsair H60i, H100i, H115i, H150i RGB Pro XT liquid coolers
      - Improvements for Intel B560 and Z590 chipset based motherboards
      - NZXT Smart Device sensor support
      - GPU details for AMD Radeon RX 6700 Series
      - GPU details for nVIDIA CMP 30HX, CMP 40HX, GeForce GT 1010
      What's new since AIDA64 v6.00
      - SHA3-512 cryptographic hash benchmark utilizing AVX, AVX2 and AVX-512
      - AVX-512 accelerated benchmarks for Intel “Ice Lake”, “Rocket Lake”, “Tiger Lake” processors
      - AVX2 and FMA accelerated 64-bit benchmarks for AMD Zen 2 “Matisse” and “Renoir” processors
      - AVX2 and FMA accelerated 64-bit benchmarks for AMD Zen 3 “Vermeer” and “Cezanne” processors
      - AVX accelerated 64-bit benchmarks for Zhaoxin ZX-C+, KaiXian KX-5000, KaiXian KX-6000 processors
      - SSE4 optimized 64-bit benchmarks for Intel "Lakefield" SoC
      - Further optimized SHA3-512 cryptographic hash benchmark
      - Art.Lebedev Optimus Popularis, BeadaPanel, El Gato Stream Deck, EVGA Z10 RGB, Matrix Orbital EVE3 LCD display support
      - SteelSeries Apex 7, Apex 7 TKL, Apex Pro, Apex Pro TKL, Rival 710 OLED OLED display support
      - Corsair H100i Platinum and H115i Platinum liquid cooler sensor support
      - NZXT Kraken X53, X63, X73, Z63, Z73 sensor support
      - Enhanced RGB LED monitoring module
      - Cooler Master MP750 RGB LED mousepad support
      - Aqua Computer Octo, Corsair Obsidian 1000D, EVGA iCX2, EVGA iCX3, Farbwerk 360, NZXT GRID+ V3 sensor support
      - Full support for Hygon C86 “Mukti/Dhyana” CPU
      - Improved support for 3rd generation AMD Threadripper processors
      - Improved support for Intel “Comet Lake” and “Ice Lake” CPUs
      - Improvements for AMD A520, B550, X570 chipset based motherboards
      - Support for PCI Express 4.0 controllers and devices
      - Preliminary support for Intel "Alder Lake", “Elkhart Lake”, “Jasper Lake” CPUs
      - Enhanced support for LGA-1200 motherboards
      - Advanced support for LSI RAID controllers
      - NVMe 1.4 support
      - OpenCL 3.0 support
      - SMBIOS 3.4.0 support
      - GPU details for AMD Radeon Pro W5500, Radeon RX 590 GME, Radeon RX 5500, Radeon RX 5600 XT, Radeon RX 5700, Radeon RX 6800, Radeon RX 6900, Radeon VII Series
      - GPU details for nVIDIA GeForce GTX 1600, GeForce GTX 1650 Ti, GeForce MX330, GeForce MX350, GeForce MX450, GeForce RTX 2000 Super, GeForce RTX 2060 Series, GeForce RTX 3000 Series
      - Preliminary support for AMD “Navi” GPUs
      - Fixed handling of per-core HyperThreading (Intel Comet Lake-S)
      - Fixed lockup at startup on systems with multiple CPU groups
      - Retired SHA1 and VP8 benchmarks
      [ Press Release (English) ]
      [ Press Release (magyar) ]
      [ What's new in AIDA64 v6.33 ]
      [ Download ]
    • By Fiery
      The new AIDA64 update introduces optimized benchmarks for AMD Ryzen 5000 Series processors, monitoring of EVGA iCX3 sensor values, and supports the latest AMD and Intel CPU platforms as well as the new graphics and GPGPU computing technologies by both AMD and nVIDIA.
            
      AIDA64 for Huawei devices
      AIDA64 for Android has crossed the 10 million download mark at the Play Store. It is also available now in the Huawei AppGallery, a blooming app store that offers automatic updates and various security features.
      New features & improvements
      - AVX2 and FMA accelerated 64-bit benchmarks for AMD Zen 3 based Ryzen 5000 Series processors
      - EVGA iCX3 sensor support
      - GPU details for AMD Radeon RX 6000 Series
      - GPU details for nVIDIA GeForce RTX 3050, GeForce RTX 3060, GeForce RTX 3060 Ti, GeForce RTX 3070 Ti, GeForce RTX 3080 Ti
      What's new since AIDA64 v6.00
      - SHA3-512 cryptographic hash benchmark utilizing AVX, AVX2 and AVX-512
      - AVX-512 accelerated benchmarks for Intel “Ice Lake”, “Rocket Lake”, “Tiger Lake” processors
      - AVX2 and FMA accelerated 64-bit benchmarks for AMD Zen 2 “Matisse” and “Renoir” processors
      - AVX accelerated 64-bit benchmarks for Zhaoxin ZX-C+, KaiXian KX-5000, KaiXian KX-6000 processors
      - SSE4 optimized 64-bit benchmarks for Intel "Lakefield" SoC
      - Further optimized SHA3-512 cryptographic hash benchmark
      - Art.Lebedev Optimus Popularis, BeadaPanel, El Gato Stream Deck, EVGA Z10 RGB, Matrix Orbital EVE3 LCD display support
      - SteelSeries Apex 7, Apex 7 TKL, Apex Pro, Apex Pro TKL, Rival 710 OLED OLED display support
      - Corsair H100i Platinum and H115i Platinum liquid cooler sensor support
      - NZXT Kraken X53, X63, X73, Z63, Z73 sensor support
      - Enhanced RGB LED monitoring module
      - Cooler Master MP750 RGB LED mousepad support
      - Aqua Computer Octo, Corsair Obsidian 1000D, EVGA iCX2, Farbwerk 360, NZXT GRID+ V3 sensor support
      - Full support for Hygon C86 “Mukti/Dhyana” CPU
      - Improved support for 3rd generation AMD Threadripper processors
      - Improved support for Intel “Comet Lake” and “Ice Lake” CPUs
      - Improvements for AMD A520, B550, X570 chipset based motherboards
      - Support for PCI Express 4.0 controllers and devices
      - Preliminary support for Intel "Alder Lake", “Elkhart Lake”, “Jasper Lake” CPUs
      - Enhanced support for LGA-1200 motherboards
      - Advanced support for LSI RAID controllers
      - NVMe 1.4 support
      - OpenCL 3.0 support
      - SMBIOS 3.4.0 support
      - GPU details for AMD Radeon Pro W5500, Radeon RX 590 GME, Radeon RX 5500, Radeon RX 5600 XT, Radeon RX 5700, Radeon VII Series
      - GPU details for nVIDIA GeForce GTX 1600, GeForce GTX 1650 Ti, GeForce MX330, GeForce MX350, GeForce MX450, GeForce RTX 2000 Super, GeForce RTX 2060 Series, GeForce RTX 3000 Series
      - Preliminary support for AMD “Navi” GPUs
      - Fixed handling of per-core HyperThreading (Intel Comet Lake-S)
      - Fixed lockup at startup on systems with multiple CPU groups
      - Retired SHA1 and VP8 benchmarks
      [ Press Release (English) ]
      [ Press Release (magyar) ]
      [ What's new in AIDA64 v6.32 ]
      [ Download ]
    • By Anthony Suttorp
      I am new to aida64 extreme, just purchased a new video card... a Nitro RX 6700 XT..
      a picked up a little raspberry pi screen to display temps/utilization/etc.. I was just designing my screen and ran into this problem..
      aida64 was detecting my old GPU (an NVidia 1060), its sensors worked perfectly.  I took it out, then plugged in the new AMD, it is definitely working, runs game, mines etc... I see it in Aida64 extreme "windows video".  but when I try add GPU sensors to the panel, there are no sensors available, I added RTSS FPS but it just displays 0.
      I tried downloading the beta version of aida64, but have the same issue, no sensor appears for AMD GPU.. 
      set preferences to wake GPU on startup, and rebooted to same issues..
      is there anything else I need to do, or do I need to wait for a patch for new video cards?
      Ran a sensor profiling dump:
      ------[ Versions ]------
      Program Version : AIDA64 Extreme v6.32.5650 Beta
      BenchDLL Version: 4.5.841.8-x64
      Windows Version : Microsoft Windows 10 Home 10.0.19041.867 (64-bit)
      GetProductInfo  : 0x00000065
      ------[ Motherboard Info ]------
      Motherboard ID      : 63-0100-000001-00101111-040416-Chipset$0AAAA000_BIOS DATE: 04/07/17 10:36:06 VER: V1.20
      Motherboard Model   : MSI Z270-A Pro (MS-7A71)
      Motherboard Chipset : Intel Kaby Point Z270, Intel Skylake-S
      DMI MB Manufacturer : MSI
      DMI MB Product      : Z270-A PRO (MS-7A71)
      DMI MB Version      : 1.0
      DMI MB Serial       : H416538623
      DMI SYS Manufacturer: MSI
      DMI SYS Product     : MS-7A71
      DMI SYS Version     : 1.0
      DMI SYS Serial      : Default string
      DMI BIOS Version    : 1.20
      ------[ Video Adapters ]------
      AMD Radeon RX 6700 XT [1002-73DF] [NoDB] [1002-73DF / 1DA2-E445 / Rev C1]
      ------[ Video Driver ]------
      atiadlxx: 7.20.50.1418
      nvapi.dll: 27.21.14.6089 - nVIDIA ForceWare 460.89
      aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||amdxc64||8.18.10.0400|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||amdxc32||8.18.10.0400|||amdxn64|||atidxx64|||atidxx64|||amdxn32|||atidxx32|||atidxx32|||atiumdva|||atiumd6a
      aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||amdxc64||8.18.10.0400|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||amdxc32||8.18.10.0400|||amdxn64|||atidxx64|||atidxx64|||amdxn32|||atidxx32|||atidxx32|||atiumdva|||atiumd6a
      aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||amdxc64||8.18.10.0400|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||amdxc32||8.18.10.0400|||amdxn64|||atidxx64|||atidxx64|||amdxn32|||atidxx32|||atidxx32|||atiumdva|||atiumd6a
      aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||amdxc64||8.18.10.0400|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||amdxc32||8.18.10.0400|||amdxn64|||atidxx64|||atidxx64|||amdxn32|||atidxx32|||atidxx32|||atiumdva|||atiumd6a
      aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||amdxc64||8.18.10.0400|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||amdxc32||8.18.10.0400|||amdxn64|||atidxx64|||atidxx64|||amdxn32|||atidxx32|||atidxx32|||atiumdva|||atiumd6a
      aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||amdxc64||8.18.10.0400|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||amdxc32||8.18.10.0400|||amdxn64|||atidxx64|||atidxx64|||amdxn32|||atidxx32|||atidxx32|||atiumdva|||atiumd6a
      aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||amdxc64||8.18.10.0400|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||amdxc32||8.18.10.0400|||amdxn64|||atidxx64|||atidxx64|||amdxn32|||atidxx32|||atidxx32|||atiumdva|||atiumd6a
      aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||aticfx64||8.17.10.1689|||amdxc64||8.18.10.0400|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||aticfx32||8.17.10.1689|||amdxc32||8.18.10.0400|||amdxn64|||atidxx64|||atidxx64|||amdxn32|||atidxx32|||atidxx32|||atiumdva|||atiumd6a
      ------[ Sensor Profiling (Init) ]------
      SensorInfo   :   75.110 ms
      GPUSensorInfo:    0.010 ms
      HDD          :    0.112 ms
      SPD          :    0.564 ms
      AMB          :    0.001 ms
      Asus EPU2    :    0.000 ms
      Asus EPU1    :    0.000 ms
      nVIDIA SPP   :    0.000 ms
      nVIDIA MCP   :    0.000 ms
      Intel GMCH   :    0.000 ms
      Bixby        :    0.000 ms
      Intel PCH    :    0.010 ms
      Intel SNB    :    0.025 ms
      Zambezi      :    0.000 ms
      Kaveri       :    0.000 ms
      Zen          :    0.000 ms
      AMD SVI2     :    0.000 ms
      MTC0303      :    0.000 ms
      Smart Battery:    0.000 ms
      HID UPS      :    0.000 ms
      TVALZ        :    0.000 ms
      Asetek LC    :    0.000 ms
      Kraken X-2   :    0.000 ms
      Riing+       :    0.000 ms
      Hydro Pt     :    0.000 ms
      LM78         :    0.408 ms
      TT DPS       :    0.000 ms
      Digifanless  :    0.000 ms
      Corsair RMi  :    0.000 ms
      Corsair AXi  :    0.000 ms
      Odin         :    0.000 ms
      Aquaero      :    0.000 ms
      ------[ Sensor Profiling (Last) ]------
      SensorInfo   :   78.283 ms
      GPUSensorInfo:    0.005 ms
      HDD          :    0.091 ms
      SPD          :    0.539 ms
      AMB          :    0.001 ms
      Asus EPU2    :    0.000 ms
      Asus EPU1    :    0.000 ms
      nVIDIA SPP   :    0.000 ms
      nVIDIA MCP   :    0.001 ms
      Intel GMCH   :    0.000 ms
      Bixby        :    0.000 ms
      Intel PCH    :    0.025 ms
      Intel SNB    :    0.034 ms
      Zambezi      :    0.000 ms
      Kaveri       :    0.000 ms
      Zen          :    0.000 ms
      AMD SVI2     :    0.000 ms
      MTC0303      :    0.000 ms
      Smart Battery:    0.000 ms
      HID UPS      :    0.000 ms
      TVALZ        :    0.000 ms
      Asetek LC    :    0.000 ms
      Kraken X-2   :    0.000 ms
      Riing+       :    0.000 ms
      Hydro Pt     :    0.001 ms
      LM78         :    0.416 ms
      TT DPS       :    0.000 ms
      Digifanless  :    0.000 ms
      Corsair RMi  :    0.000 ms
      Corsair AXi  :    0.000 ms
      Odin         :    0.000 ms
      Aquaero      :    0.000 ms
       
       
×
×
  • Create New...