Jump to content
AIDA64 Discussion Forum
Darkbluesky

Temperatures correction

Recommended Posts

Hello,

I have found that my Asus mobo temp probes are shown in Aida64 with more or less 5C more than my analog thermometer says. So I would like to add a simple offset to the affected temps in order to show them correctly. How can I do that in AIDA64, please? Does someone knows how to do that?

I am not talking about changing the Tjmax, which is for CPU Core temps, I would need to adjust by means of a delta or offset other temps.

Thank you!

Share this post


Link to post
Share on other sites

Sorry, but for measuring ambient temps, the best way is still to use a good analog thermometer. At least, much more reliable than use Pc Probe. And first, I want to measure ambient outside the case, not on mobo. Second, Aida64 and Asus PC Probe give the same reading for the ambient temp (I have the probe outside the case, fan inlet), so it is useless to use PC Probe (and it seems logical as both read the same sensors...).

As my analog thermometer is very good, I trust it.

So, how can I correct Aida64 temps? (Not Vcore temps). Is it not possible at all for Aida64?

Share this post


Link to post
Share on other sites

So I guess that it means that AIDA64 can't add offsets to temps to correct them... For me, this is incredible that a software like AIDA, which aim to pro market too, does not offer this.

I hope it will be added in recent new versions. It is quite easy to do.

Well, thanks anyway.

Share this post


Link to post
Share on other sites

AIDA64 currently does not support temperatures correction, but we're planning to implement that feature soon. We're currently very busy with implementing AMD Llano, AMD Bulldozer and VIA QuadCore support, so I'm not sure if we could add the temperature correction before the next AIDA64 release. I'll let you know in this topic when we can manage to add this feature.

Thanks,

Fiery

Share this post


Link to post
Share on other sites

Thank you Fiery. I'll keep an eye on this thread, as I am really interested!

BTW, maybe it is in your to-do list, but at side of the temp correction discussed, also a Tjmax for each core and a slope value for each core would be a nice improvement, instead of the single Tjmax value for all cores that there is already.

Personally I am more interested in the general temp correction, as discussed, though.

Share this post


Link to post
Share on other sites

For Asus A7V8X-X:

correct temp. = -15.096+1.4893*(temp. shown in Aida64) [C°]

Where did you find that formula? We're not aware of anything like that applying to A7V8X-X motherboard.

Share this post


Link to post
Share on other sites

Where did you find that formula? We're not aware of anything like that applying to A7V8X-X motherboard.

I guess it is a fit that he has done with some readings asumed to be correct or eventually ñeasured. I mean, it has the look of a self built law, nothing official.

Share this post


Link to post
Share on other sites

Under ubuntu using lm-sensor the temp. needs correction according to this:

http://www.linuxquestions.org/questions/linux-hardware-18/a7v8x-x-lm-sensors-138421/

I've tried and it works. The same formula is valid for aida64.

We've implemented that formula for A7V8X-X motherboard in the following new beta release of AIDA64 Extreme Edition:

http://www.aida64.com/downloads/aida64extremebuild1438b5s1qcymprzip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Thanks,

Fiery

Share this post


Link to post
Share on other sites

We've implemented temperature, fan speed and voltage correction in the following new beta version of AIDA64 Extreme Edition:

http://www.aida64.com/downloads/aida64extremebuild1481xz1wg0rpkvzip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

You can configure the sensor correction feature in AIDA64 / main menu / File / Preferences / Hardware Monitoring / Correction. Please note that this feature is not meant to be used to correct such situations when the wrong voltage rail is assigned for e.g. +5V or +12V readings. In such case adjusting the hardware monitoring module of AIDA64 is still necessary. The correction feature is meant to be used for slight corrections only, e.g. when the temperature diode of a HDD or SSD is slightly off, or when e.g. +0.05V offset has to be added to the Vcore voltage reading.

Let me know how it works.

Share this post


Link to post
Share on other sites

We've implemented temperature, fan speed and voltage correction in the following new beta version of AIDA64 Extreme Edition:

http://www.aida64.co...81xz1wg0rpkvzip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

You can configure the sensor correction feature in AIDA64 / main menu / File / Preferences / Hardware Monitoring / Correction. Please note that this feature is not meant to be used to correct such situations when the wrong voltage rail is assigned for e.g. +5V or +12V readings. In such case adjusting the hardware monitoring module of AIDA64 is still necessary. The correction feature is meant to be used for slight corrections only, e.g. when the temperature diode of a HDD or SSD is slightly off, or when e.g. +0.05V offset has to be added to the Vcore voltage reading.

Let me know how it works.

It works fine, thanks!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...