Jump to content
AIDA64 Discussion Forum
Fahrenheit

Supported Hardware Model List (External LCD Displays)

Recommended Posts

Hi, I've seen the list of supported external LCD manufacturers at the bottom of the External Displays page.  However is there a device matrix that shows manufacturer, model, dimensions, interface, etc. of supported devices?  I've been searching each of the manufacturers manually, but am having a hard time finding a display that will meet my needs.

I'd like to mod an LCD\OLED display on the front of my Corsair Air 240 case, to display AIDA64 stats.  However it's a Mini-ITX and only has room for a 3.5"x 2" display, or a 3"x3" display:
corsair_air240.jpg
I'd like to stick to a USB display for ease.  Having a matrix of supported external devices would help narrow the list down. 

Also, I see that Adafruit displays are supported; is that a specific device or all?  Curious if this device works: https://www.adafruit.com/product/3315

Thanks!

 

Share this post


Link to post
Share on other sites

The following document should help you:

http://download.aida64.com/resources/lcd/aida64_lcd_guide.pdf

As for the mentioned device, that is not supported by AIDA64 currently.  To me it looks like a SPI connected device, in which case you need to find a way to connect it to your computer at first.  Most likely you would want to connect the device to a USB port, using e.g. a FTDI FT232H bridge chip.

Share this post


Link to post
Share on other sites
On ‎2017‎. ‎11‎. ‎12‎. at 1:40 AM, Fahrenheit said:

Great thanks, ended up going with the Matrix Orbital LK204-25.

 

 

20171110_165220.jpg

It looks great :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By Koithim
      Hey there,
      I replaced my old Z10 with the new Z10 RGB.  When i try to enable the LCD i get:
      Error: HID device 3842-2601 not found.
      I have the latest beta installed (sept. 16).
      Cheers!
      K
    • By beada
      BeadaFrame Display Kit is an ARM Cortex-A7 development platform which bundled with a 7" TFT LCD Display. It can be powered and communicated with PC Host by a single Micro USB cable. Currently we use it as a secondary PC monitor for display of hardware status through Remote Sensor LCD.
      The question is --  is there any way to implement it as a native support of AIDA LCD screen? We are running Debian Stretch on the ARM Cortex-A7 core.


       
      And more details of this display kit:
      CPU
      NXP/Freescale ARM Cortex-A7 i.MX6ULL
      RAM
      512MB DDR3L
      Storage
      16GB/32GB eMMC
      Connectivities
      1 x WIFI 802.11 b/g/n module(AP6212) 1 x USB 2.0 Host(Type A) 1 x USB 2.0 OTG(Micro-USB) Display
      7.0" TFT LCD: 800x480 (AT070TN92) , w/ touch and bezel
      On Board Resources
      Reset Circuit with reset button 1 x Power select jumper 1 x Boot select jumper 1 x USER LED Dimension
      188 x 118 x 35(mm)
      Operating System
      Debian Stretch
      Consumption
      5V/350mA
    • By Shaman
      Dear all,
      I am trying to figure out the best option for a small (max 7'') external screen to use with SensorPanel.
      I find lots of options on eBay that I suppose are all viable (e.g., https://www.ebay.co.uk/itm/7inch-HDMI-LCD-H-with-case-1024x600-IPS-Capacitive-Touch-Screen-Audio-Output/133067577890).
       
      What I am unsure at the moment:
      - Is the quality/resolution of the screen important?
      - Is touch input needed/used?
      - Is there any difference (limitations) between the three available options (using an HDMI connected screen, a USB connected one and/or an affordable Android tablet)? 
       
      Any input would be appreciated. Thank you in advance!
       
      Best,
      S
    • By Ventilator
      Would be nice if you could rotate output 90 degrees in AIDA 64 LCD config for Logitech ARX.
      This, so you can get tablet mode.
       
    • By Roy
      Hi,
      it would be nice if there was the possibility to send sensor values unformatted as a number or percentage, via a serial port.
      Similar to the LCD displays, only without formatting, or pure numbers with separators.
      Together with a small GUI.
      Background is the simple evaluation of the data with a microcontroller and display in different ways.
      I imagine not only LCD or OLED, but rather seven segment display, nixi tubes or an analog pointer display. That would create a lot of possibilities.
×
×
  • Create New...