Jump to content
AIDA64 Discussion Forum
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Maident
      The sensor report shows the wrong fan headers for the Gigabyte Aorus Z390 master MB.  Here is what I was able to determine on my MB fan headers.  I did not use System 1 fan header and since AIDA64 did not see a Chassis 3 fan sensor I have to assume that System 1 fan header is your Chassis 3.
      CPU = CPU
      CPU OPT = System 6 Pump
      Chassis 1 = System 3
      Chassis 2 = System 2
      Chassis 3 = not reported
      Chassis 4 = System 5 Pump
      Chassis 5 = System 4
      Chassis 7 = CPU_OPT
    • By Rabbithole
      So after the recent update my sensor panel no longer shows a sensor reading for my water pump or radiator temp. Is that a Windows update problem or Aida64 ? The radiator temp now reads N/C and the pump sits at zero. But I know the pump is working cause my cpu is at 36 C and it's clocked at 5000mhz. Has anyone else experienced this problem?
    • By fads
      Hello,
      Can you please help me. I just bought this new motherboard Gigabyte Z270X GAMING 9 but aida64 is reading some sensors incorrectly. I have attached the dumps below and a screenshot of aida64 sensor readings. Thank you, really appreciated.
      isasensordump.txt
      smbusdump_full.txt
    • By Dr4g0n
      Hello, 
      i own this mainboard: gigabyte x399 designare ex
      and i'm missing also 2 Onboard Temp-Sensor, in HWMonitor it is shown but Aida64 (Beta 4577) dosnt show it.
      By the way i own also a ADAPTEC HBA 1100-24I SINGLE Raidcontroller and the Temp also not showen....  
      My Temp Sensor Logs (ISA & SMBus) are attatched. 
      isasensordump.txt
      smbusdump_full.txt
×
×
  • Create New...