Jump to content

[Sold] ER-OLEDM032 (SSD1322) 3.2" OLED USB interface


Recommended Posts

  • 2 months later...
  • 2 weeks later...
On 12/3/2019 at 7:42 PM, SnarlingFox said:

Just replying back with some feedback.

Although I wasn't using this with AIDA64 (rather, I was using Python and Ubuntu to monitor my ESXi Home Lab), the kit worked perfectly so kudos added to you Romain :) 

I will now be getting Aida64 to use it with my desktop :) 

Here's a couple of photos...

2019-08-24_15_03_12.jpg

 

That looks awesome!

Link to post
Share on other sites
  • 1 month later...
  • 6 months later...

I'm from China.First of all, please forgive my poor English.....

I have a very small itx chassis, and I want to be able to fit a larger OLED display in a limited volume to monitor hardware status.

So I found an OLED display on Taobao,The parameters of the display are as follows

  • Size: 3.83inch
  • Resolving power: 320x132
  • Control chip: Two  SSD1320
  • Interface type:  SPI
  • Pin count:  10

Pin assignment

PIN 1      GND       Power grounding

PIN 2      VCC       Positive pole of power supply,Range:2.9-3.3V

PIN 3      SCL       Clock pin

PIN 4      SDA       Data pin

PIN 5      RES       Reset pin,Low potential effective

PIN 6      DC       Control

PIN 7     CS1       The first one Chip selection

PIN 8      CS2       The second one Chip selection

PIN 9      FR1       The first one  Signal synchronization

PIN 10      FR2       The second one Power grounding

Product pictures

1763610684_.JPG.ee57b2a99a216778c763e824d362e711.JPG

 

To connect this OLED display to the computer,I bought a FT232H module.

Product pictures

2.thumb.JPG.e1a915ba60f8fee3e07b2dfca78a12cd.JPG

 

So......I found your way to connect the hardware,But they can't work...........

My question

  1. FT232H Can  connect two ssd1320?If  can connect,How to connect.
  2. How to choose Ft232h driver ,VCP?D2XX?Libusb?
  3. How to set Ft232h pattern in the FT_Prog,like mode?IO pin?
  4. How to set AIDA64,choose api?
Link to post
Share on other sites
On 8/27/2020 at 4:29 PM, zhiyongsuoni said:

I'm from China.First of all, please forgive my poor English.....

I have a very small itx chassis, and I want to be able to fit a larger OLED display in a limited volume to monitor hardware status.

So I found an OLED display on Taobao,The parameters of the display are as follows

  • Size: 3.83inch
  • Resolving power: 320x132
  • Control chip: Two  SSD1320
  • Interface type:  SPI
  • Pin count:  10

Pin assignment

PIN 1      GND       Power grounding

PIN 2      VCC       Positive pole of power supply,Range:2.9-3.3V

PIN 3      SCL       Clock pin

PIN 4      SDA       Data pin

PIN 5      RES       Reset pin,Low potential effective

PIN 6      DC       Control

PIN 7     CS1       The first one Chip selection

PIN 8      CS2       The second one Chip selection

PIN 9      FR1       The first one  Signal synchronization

PIN 10      FR2       The second one Power grounding

Product pictures

 

 

To connect this OLED display to the computer,I bought a FT232H module.

Product pictures

 

 

So......I found your way to connect the hardware,But they can't work...........

My question

  1. FT232H Can  connect two ssd1320?If  can connect,How to connect.
  2. How to choose Ft232h driver ,VCP?D2XX?Libusb?
  3. How to set Ft232h pattern in the FT_Prog,like mode?IO pin?
  4. How to set AIDA64,choose api?

I'm afraid we're not skilled in hardware development issues.  Maybe the topic opener romP44 can chime in.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...