Jump to content
AIDA64 Discussion Forum
PierrotIV

Nuvoton NCT6791D not showing (Asus Sabertooth Z87)

Recommended Posts

10 hours ago, PierrotIV said:

Hi,

In last beta 4944, the Nuvoton NCT6791D is not showing any sensor.

In the previous 4936 it was working.

Hope this helps ;)

Regards,

PierrotIV

We've updated the kernel drivers.  Make sure to restart Windows to apply the changes.

Share this post


Link to post
Share on other sites
15 hours ago, PierrotIV said:

Hi,

Restarting windows does not change the situation. The sensors are not reported any more.

Regards,

PierrotIV

Thank you for your reply.  Something must have been mixed up after the upgrade.  Please try to close AIDA64, download the latest beta ZIP package, extract the whole contents into the existing installation folder of AIDA64, and let it overwrite any existing files.  Restart Windows one more time, and check if it works.  If not, then please check if your motherboard is properly identified (on the Computer / Summary page of AIDA64 for example).

Share this post


Link to post
Share on other sites
On 2/8/2019 at 4:16 PM, Fiery said:

Thank you for your reply.  Something must have been mixed up after the upgrade.  Please try to close AIDA64, download the latest beta ZIP package, extract the whole contents into the existing installation folder of AIDA64, and let it overwrite any existing files.  Restart Windows one more time, and check if it works.  If not, then please check if your motherboard is properly identified (on the Computer / Summary page of AIDA64 for example).

Hi,

Thanks for your reply and help ;)

After uninstalling the previous aida64 and restarting the computer, I extracted the latest beta zip in a new folder (without keeping the ini from the previous install).

Symptoms are exactly the same as in my initial post and the motherboard is correctly identified in computer / summary page.

PierrotIV

Share this post


Link to post
Share on other sites
12 hours ago, PierrotIV said:

Hi,

Thanks for your reply and help ;)

After uninstalling the previous aida64 and restarting the computer, I extracted the latest beta zip in a new folder (without keeping the ini from the previous install).

Symptoms are exactly the same as in my initial post and the motherboard is correctly identified in computer / summary page.

PierrotIV

It's very odd :(  Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first.


Thanks,
Fiery

Share this post


Link to post
Share on other sites
2 hours ago, Fiery said:

It's very odd :(  Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first.


Thanks,
Fiery

Hi,

Here they are:

------[ Versions ]------

Program Version : AIDA64 Extreme v5.99.4944 Beta
BenchDLL Version: 4.3.793-x64
Windows Version : Microsoft Windows 10 Pro 10.0.17763.292 (64-bit)

------[ Motherboard Info ]------

Motherboard ID      : <DMI>
Motherboard Model   : Asus Sabertooth Z87
Motherboard Chipset : Intel Lynx Point Z87, Intel Haswell

DMI MB Manufacturer : ASUSTeK COMPUTER INC.
DMI MB Product      : SABERTOOTH Z87
DMI MB Version      : Rev 1.xx
DMI MB Serial       : 130612993601778
DMI SYS Manufacturer: ASUS
DMI SYS Product     : All Series
DMI SYS Version     : System Version
DMI SYS Serial      : System Serial Number
DMI BIOS Version    : 2302

ITE SuperIO Port           = 00h
ITE SuperIO HWMonitor Port = 0000h     (    0000h /     0000h)
ITE SuperIO HWMonitor MMIO = 00000000h (00000000h / 00000000h)
ITE SuperIO Device ID      = 0000h     (    0000h /     0000h)
ITE SuperIO Version        = 00h       (      00h /       00h)

Winbond SuperIO Port              = 00h
Winbond SuperIO HWMonitor Port/60 = 0000h (0000h / 0000h)
Winbond SuperIO HWMonitor Port/64 = 0000h (0000h / 0000h)
Winbond SuperIO Device ID         = 0000h (0000h / 0000h)

Fintek SuperIO Port           = 00h
Fintek SuperIO HWMonitor Port = 0000h (0000h / 0000h)
Fintek SuperIO Device ID      = 0000h (0000h / 0000h)

SMSC SuperIO Port           = 00h
SMSC SuperIO HWMonitor Port = 0000h (0000h / 0000h)
SMSC SuperIO Device ID      = 0000h (0000h / 0000h)

ASpeed SuperIO Port = 00h

------[ ACPI Temperatures & Fans ]------

_TZ_.THM0._TMP             :
_TZ_.THM1._TMP             :
_TZ_.THR0._TMP             :
_TZ_.THR1._TMP             :
_TZ_.TZ00._TMP             :
_TZ_.TZ01._TMP             :
_TZ_.RTMP                  :
_TZ_.RFAN                  :
_TZ_.RFAN(0)               :
_TZ_.RFAN(1)               :
_SB_.ATKD._HID             :
_SB_.ATKD.TMPR             :
_SB_.PCI0.LPC0.EC0_.CCTV   :
_SB_.PCI0.LPC0.EC0_.LRPM   :
_SB_.PCI0.LPC0.EC0_.HRPM   :
_SB_.PCI0.SBRG.EC0_.ECPU   :
_SB_.PCI0.SBRG.EC0_.TACH(0):
_SB_.PCI0.SBRG.EC0_.TACH(1):
_SB_.PCI0.SBRG.EC0_.TAH0   :
_SB_.PCI0.SBRG.EC0_.TAH1   :
_SB_.PCI0.SBRG.EC0_.ST00   :
_SB_.PCI0.SBRG.EC0_.SC01   :
_SB_.PCI0.SBRG.EC0_.SC02   :
_SB_.PCI0.SBRG.EC0_.SC03   :
_SB_.PCI0.SBRG.EC0_.SC04   :
_SB_.PCI0.SBRG.EC0_.SC05   :
_SB_.PCI0.SBRG.EC0_.SC06   :
_SB_.PCI0.SBRG.EC0_.TH0R   :
_SB_.PCI0.SBRG.EC0_.TH1R   :
_SB_.PCI0.SBRG.EC0_.F0TS   :
_SB_.PCI0.SBRG.EC0_.F1TS   :
_SB_.PCI0.PIB_.EC0_.TCRT   :
_SB_.PCI0.SBRG.EC0_.CTPM   :
_SB_.PCI0.SBRG.EC__.CPUT   :
_SB_.PCI0.SBRG.EC__.SYST   :
_SB_.PCI0.LPC_.EC0_.CTMP   :
_SB_.PCI0.LPCB.EC0_.CTMP   :
_SB_.PCI0.LPC_.EC0_.TMP1   :
_SB_.PCI0.LPC_.EC0_.TMP2   :
_SB_.PCI0.LPC_.EC0_.TMPI   :
_SB_.PCI0.LPC_.EC0_.TMPV   :
_SB_.PCI0.LPCB.EC0_.A1TP   :
_SB_.PCI0.LPCB.EC0_.A2TP   :
_SB_.PCI0.LPCB.EC0_.FAN0   :
_SB_.PCI0.LPCB.EC__.TS1R   :
_SB_.PCI0.LPCB.EC__.TS2R   :
_SB_.PCI0.LPCB.EC__.TS3R   :
_SB_.PCI0.LPCB.EC__.F1FL   :
_SB_.PCI0.LPCB.EC__.F1FH   :
_SB_.PCI0.LPCB.EC__.F2FL   :
_SB_.PCI0.LPCB.EC__.F2FH   :
_SB_.PCI0.LPC_.H8EC.RTMP   :
_SB_.PCI0.LPC_.H8EC.LTMP   :
_SB_.PCI0.LPC_.H8EC.MTMP   :
_SB_.PCI0.LPC_.H8EC.GTMP   :
_SB_.PCI0.LPCB.H8EC.CTMP   :
_SB_.PCI0.LPCB.H8EC.DTMP   :
_SB_.PCI0.LPCB.H8EC.GTMP   :
_SB_.PCI0.LPCB.H8EC.ITMP   :
_SB_.PCI0.LPCB.H8EC.MTMP   :
_SB_.PCI0.LPCB.H8EC.STMP   :
_SB_.PCI0.LPCB.H8EC.PFAN   :
_SB_.PCI0.LPCB.EC0_.OTPC   :
_SB_.PCI0.LPCB.EC0_.VGAT   :
_SB_.PCI0.LPCB.EC0_.CHPT   :
_SB_.PCI0.LPCB.EC0_.CPUT   :
_SB_.PCI0.LPCB.EC0_.SYST   :
_SB_.PCI0.LPCB.EC0_.DTS1   :
_SB_.PCI0.LPCB.EC0_.DTS2   :
_SB_.PCI0.LPCB.EC0_.DIMM   :
_SB_.PCI0.LPCB.EC0_.FANH   :
_SB_.PCI0.LPCB.EC0_.FANL   :
_SB_.PCI0.LPCB.EC0_.CUTP   :
_SB_.PCI0.LPCB.EC0_.PHTP   :
_SB_.PCI0.LPCB.EC0_.DIMT   :
_SB_.PCI0.LPCB.EC0_.INLE   :
_SB_.PCI0.LPCB.EC0_.PANT   :
_SB_.PCI0.LPCB.EC0_.F0RM   :
_SB_.PCI0.LPCB.EC0_.F0DT   :
_SB_.PCI0.LPCB.EC0_.F1RM   :
_SB_.PCI0.LPCB.EC0_.F1DT   :
_SB_.PCI0.SBRG.EC0_.CUTP   :
_SB_.PCI0.SBRG.EC0_.PHTP   :
_SB_.PCI0.SBRG.EC0_.DIMT   :
_SB_.PCI0.SBRG.EC0_.INLE   :
_SB_.PCI0.SBRG.EC0_.PANT   :
_SB_.PCI0.SBRG.EC0_.F0RM   :
_SB_.PCI0.SBRG.EC0_.F0DT   :
_SB_.PCI0.SBRG.EC0_.F1RM   :
_SB_.PCI0.SBRG.EC0_.F1DT   :
_SB_.SAMB.TMPC             :
_SB_.SAMB.TMPH             :
_SB_.STR0._TMP             :
_SB_.STR1._TMP             :
_SB_.STR2._TMP             :
_SB_.STR3._TMP             :
_SB_.STR4._TMP             :
_SB_.STR5._TMP             :
_SB_.STR6._TMP             :
_SB_.STR7._TMP             :
CPUT                       :
GPUT                       :
SYST                       :
FANT                       :
BATT                       :


Thank you.

Share this post


Link to post
Share on other sites
20 minutes ago, PierrotIV said:

Hi,

Here they are:

------[ Versions ]------

Program Version : AIDA64 Extreme v5.99.4944 Beta
BenchDLL Version: 4.3.793-x64
Windows Version : Microsoft Windows 10 Pro 10.0.17763.292 (64-bit)

------[ Motherboard Info ]------

Motherboard ID      : <DMI>
Motherboard Model   : Asus Sabertooth Z87
Motherboard Chipset : Intel Lynx Point Z87, Intel Haswell

DMI MB Manufacturer : ASUSTeK COMPUTER INC.
DMI MB Product      : SABERTOOTH Z87
DMI MB Version      : Rev 1.xx
DMI MB Serial       : 130612993601778
DMI SYS Manufacturer: ASUS
DMI SYS Product     : All Series
DMI SYS Version     : System Version
DMI SYS Serial      : System Serial Number
DMI BIOS Version    : 2302

ITE SuperIO Port           = 00h
ITE SuperIO HWMonitor Port = 0000h     (    0000h /     0000h)
ITE SuperIO HWMonitor MMIO = 00000000h (00000000h / 00000000h)
ITE SuperIO Device ID      = 0000h     (    0000h /     0000h)
ITE SuperIO Version        = 00h       (      00h /       00h)

Winbond SuperIO Port              = 00h
Winbond SuperIO HWMonitor Port/60 = 0000h (0000h / 0000h)
Winbond SuperIO HWMonitor Port/64 = 0000h (0000h / 0000h)
Winbond SuperIO Device ID         = 0000h (0000h / 0000h)

Fintek SuperIO Port           = 00h
Fintek SuperIO HWMonitor Port = 0000h (0000h / 0000h)
Fintek SuperIO Device ID      = 0000h (0000h / 0000h)

SMSC SuperIO Port           = 00h
SMSC SuperIO HWMonitor Port = 0000h (0000h / 0000h)
SMSC SuperIO Device ID      = 0000h (0000h / 0000h)

ASpeed SuperIO Port = 00h

------[ ACPI Temperatures & Fans ]------

_TZ_.THM0._TMP             :
_TZ_.THM1._TMP             :
_TZ_.THR0._TMP             :
_TZ_.THR1._TMP             :
_TZ_.TZ00._TMP             :
_TZ_.TZ01._TMP             :
_TZ_.RTMP                  :
_TZ_.RFAN                  :
_TZ_.RFAN(0)               :
_TZ_.RFAN(1)               :
_SB_.ATKD._HID             :
_SB_.ATKD.TMPR             :
_SB_.PCI0.LPC0.EC0_.CCTV   :
_SB_.PCI0.LPC0.EC0_.LRPM   :
_SB_.PCI0.LPC0.EC0_.HRPM   :
_SB_.PCI0.SBRG.EC0_.ECPU   :
_SB_.PCI0.SBRG.EC0_.TACH(0):
_SB_.PCI0.SBRG.EC0_.TACH(1):
_SB_.PCI0.SBRG.EC0_.TAH0   :
_SB_.PCI0.SBRG.EC0_.TAH1   :
_SB_.PCI0.SBRG.EC0_.ST00   :
_SB_.PCI0.SBRG.EC0_.SC01   :
_SB_.PCI0.SBRG.EC0_.SC02   :
_SB_.PCI0.SBRG.EC0_.SC03   :
_SB_.PCI0.SBRG.EC0_.SC04   :
_SB_.PCI0.SBRG.EC0_.SC05   :
_SB_.PCI0.SBRG.EC0_.SC06   :
_SB_.PCI0.SBRG.EC0_.TH0R   :
_SB_.PCI0.SBRG.EC0_.TH1R   :
_SB_.PCI0.SBRG.EC0_.F0TS   :
_SB_.PCI0.SBRG.EC0_.F1TS   :
_SB_.PCI0.PIB_.EC0_.TCRT   :
_SB_.PCI0.SBRG.EC0_.CTPM   :
_SB_.PCI0.SBRG.EC__.CPUT   :
_SB_.PCI0.SBRG.EC__.SYST   :
_SB_.PCI0.LPC_.EC0_.CTMP   :
_SB_.PCI0.LPCB.EC0_.CTMP   :
_SB_.PCI0.LPC_.EC0_.TMP1   :
_SB_.PCI0.LPC_.EC0_.TMP2   :
_SB_.PCI0.LPC_.EC0_.TMPI   :
_SB_.PCI0.LPC_.EC0_.TMPV   :
_SB_.PCI0.LPCB.EC0_.A1TP   :
_SB_.PCI0.LPCB.EC0_.A2TP   :
_SB_.PCI0.LPCB.EC0_.FAN0   :
_SB_.PCI0.LPCB.EC__.TS1R   :
_SB_.PCI0.LPCB.EC__.TS2R   :
_SB_.PCI0.LPCB.EC__.TS3R   :
_SB_.PCI0.LPCB.EC__.F1FL   :
_SB_.PCI0.LPCB.EC__.F1FH   :
_SB_.PCI0.LPCB.EC__.F2FL   :
_SB_.PCI0.LPCB.EC__.F2FH   :
_SB_.PCI0.LPC_.H8EC.RTMP   :
_SB_.PCI0.LPC_.H8EC.LTMP   :
_SB_.PCI0.LPC_.H8EC.MTMP   :
_SB_.PCI0.LPC_.H8EC.GTMP   :
_SB_.PCI0.LPCB.H8EC.CTMP   :
_SB_.PCI0.LPCB.H8EC.DTMP   :
_SB_.PCI0.LPCB.H8EC.GTMP   :
_SB_.PCI0.LPCB.H8EC.ITMP   :
_SB_.PCI0.LPCB.H8EC.MTMP   :
_SB_.PCI0.LPCB.H8EC.STMP   :
_SB_.PCI0.LPCB.H8EC.PFAN   :
_SB_.PCI0.LPCB.EC0_.OTPC   :
_SB_.PCI0.LPCB.EC0_.VGAT   :
_SB_.PCI0.LPCB.EC0_.CHPT   :
_SB_.PCI0.LPCB.EC0_.CPUT   :
_SB_.PCI0.LPCB.EC0_.SYST   :
_SB_.PCI0.LPCB.EC0_.DTS1   :
_SB_.PCI0.LPCB.EC0_.DTS2   :
_SB_.PCI0.LPCB.EC0_.DIMM   :
_SB_.PCI0.LPCB.EC0_.FANH   :
_SB_.PCI0.LPCB.EC0_.FANL   :
_SB_.PCI0.LPCB.EC0_.CUTP   :
_SB_.PCI0.LPCB.EC0_.PHTP   :
_SB_.PCI0.LPCB.EC0_.DIMT   :
_SB_.PCI0.LPCB.EC0_.INLE   :
_SB_.PCI0.LPCB.EC0_.PANT   :
_SB_.PCI0.LPCB.EC0_.F0RM   :
_SB_.PCI0.LPCB.EC0_.F0DT   :
_SB_.PCI0.LPCB.EC0_.F1RM   :
_SB_.PCI0.LPCB.EC0_.F1DT   :
_SB_.PCI0.SBRG.EC0_.CUTP   :
_SB_.PCI0.SBRG.EC0_.PHTP   :
_SB_.PCI0.SBRG.EC0_.DIMT   :
_SB_.PCI0.SBRG.EC0_.INLE   :
_SB_.PCI0.SBRG.EC0_.PANT   :
_SB_.PCI0.SBRG.EC0_.F0RM   :
_SB_.PCI0.SBRG.EC0_.F0DT   :
_SB_.PCI0.SBRG.EC0_.F1RM   :
_SB_.PCI0.SBRG.EC0_.F1DT   :
_SB_.SAMB.TMPC             :
_SB_.SAMB.TMPH             :
_SB_.STR0._TMP             :
_SB_.STR1._TMP             :
_SB_.STR2._TMP             :
_SB_.STR3._TMP             :
_SB_.STR4._TMP             :
_SB_.STR5._TMP             :
_SB_.STR6._TMP             :
_SB_.STR7._TMP             :
CPUT                       :
GPUT                       :
SYST                       :
FANT                       :
BATT                       :


Thank you.

Thank you.  I'm afraid the AIDA64 kernel driver is still not working on your system.  We've done several test runs, and the updated kernel driver in the latest AIDA64 beta build of 4944 works fine.  So the issue must be that either the old kernel driver got stuck on your system, and the new beta fails to load it for some reason.  Other than reinstalling AIDA64 and restarting Windows, I'm not sure what else can be done :( In other cases that procedure fixes similar issues all the time.

Share this post


Link to post
Share on other sites
8 minutes ago, Fiery said:

Thank you.  I'm afraid the AIDA64 kernel driver is still not working on your system.  We've done several test runs, and the updated kernel driver in the latest AIDA64 beta build of 4944 works fine.  So the issue must be that either the old kernel driver got stuck on your system, and the new beta fails to load it for some reason.  Other than reinstalling AIDA64 and restarting Windows, I'm not sure what else can be done :( In other cases that procedure fixes similar issues all the time.

Well, thank you for your help anyhow.

I will stick on previous beta for now and test with the next one :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Deckard
      Hi,
      All of the system fans are no longer appearing in the sensor page Using AIDA64 extreme 5.99.4944 Beta
      RAD 1 header
      RAD 2 Header
      Chassis fan
      I cannot remember when it happend,  just noticed another post and I checked mine. same problem
       

    • By myarmor
      I was wondering why all the downloads are gone except the "try now" links?
       
      Beta, Downloads, and Downloads Archive is empty.
      I'm using FF 35.0.1.
    • By ded32
      Hello,
      I noticed that on Asus Rampage IV Extreme, AIDA64 sometimes outputs "Thread creation error: Insufficient memory for this operation" and after that readings of OPT1, OPT3, Case 2 and PCH fans become 0.0 RPM (I have OPT2, Case 1 and Case 2 fans unconnected so cannot say anything about them). CPU fan and CPU OPT fan readings are still OK.
      If I relaunch AIDA64 (File - Exit - Run again), readings become OK, and sometimes later the problem repeats.
      I have to confess that I have ASUS Suite II installed (because and only because AIDA64 missed OPTx temp support on Asus R4E!). After installation of AIDA64 Beta, I stopped running it, but process explorer shows its modules loaded and running (FanControlHelper.exe etc). So this may be result of interaction of AIDA64 and ASUS' DLLs (http://forums.aida64...ndpost__p__5532). It's not a problem for me, I plan to uninstall ASUS software. Just leaving it now only to help you in testing
      AIDA64 version: 2.50.2075 Beta.
      P.S. Fiery, thanks a lot for your great work - from another R4E user
      Never remove R4E support from AIDA64! BTW, you already have Option/Stability settings, you may add Asus Suite II compatibility there...
×