Jump to content
AIDA64 Discussion Forum
oblivioncth

LCD and Program Temperature Readings are frozen (and impossible) after sleep.

Recommended Posts

Hi,

I am running Windows 7 64 bit with the Logitech G15 (second revision) keyboard with the black and white monochrome LCD panel.

After awaking my computer from sleep, the temperature reading on the LCD panel shows CPU: -1 degrees Celsius, GPU: 42 degrees Celsius, and Mem: 255 degrees Celsius. It shows these same temps every time, and upon further examination, the program (meaning opening the AIDA64 window from the task bar) also shows these incorrect readings. The problem resolves itself if I restart it but as you can imagine that gets very annoying.

Share this post


Link to post
Share on other sites

Please let us know more about your system configuration:

1) Motherboard model, CPU type?

2) Video card (or video cards) model?

3) Do you have any external disk drives connected? (e.g. USB, FireWire, eSATA)

4) Which version of Logitech gaming keyboard drivers do you have installed?

Also, make sure to be running the very latest beta release of AIDA64 available at:

http://www.aida64.com/downloads/aida64extremebuild1492kmc8wty1zbzip

Thanks,

Fiery

Share this post


Link to post
Share on other sites

Please let us know more about your system configuration:

1) Motherboard model, CPU type?

2) Video card (or video cards) model?

3) Do you have any external disk drives connected? (e.g. USB, FireWire, eSATA)

4) Which version of Logitech gaming keyboard drivers do you have installed?

Also, make sure to be running the very latest beta release of AIDA64 available at:

http://www.aida64.com/downloads/aida64extremebuild1492kmc8wty1zbzip

Thanks,

Fiery

I just updated to the latest beta but when I did it broke it more by shifting the items way to the right (but still showed the same coordinates in the preferences so it couldn't move it back to the left anymore) so I reverted back to the stable for now.

1. I am running on Intel's Bad Axe 2 D975XBX2 and an Intel Core 2 Extreme QX6700 2.66 GHZ Quad Core

2. I use a ATI/AMD RADEON HD 5770 by Sapphire

3. Yes I have a 1TB external USB Hard Drive (My Book Elite)

4. I am running Logitech Gaming Software 7.00.291

EDIT: I just updated my Logitech drivers to the latest (8.00.127) and will see if it makes a difference

Share this post


Link to post
Share on other sites

FYI, in the latest AIDA64 beta releases we've completely revamped the Logitech LCD support, so you have to recalibrate all items, especially their placement. We've basically applied the same improvements that we introduced as the SensorPanel feature on the Logitech LCD feature. It enables you to display bars and to use a more precise items placement -- but on the other hand it requires a bit more efforts to recalibrate your old settings.

Share this post


Link to post
Share on other sites

FYI, in the latest AIDA64 beta releases we've completely revamped the Logitech LCD support, so you have to recalibrate all items, especially their placement. We've basically applied the same improvements that we introduced as the SensorPanel feature on the Logitech LCD feature. It enables you to display bars and to use a more precise items placement -- but on the other hand it requires a bit more efforts to recalibrate your old settings.

Thanks. I figured out that as you said you changed the way a few things were configured which move some of my items due to the addition of the "Total Width" with set the gap between the label and the value. I am now on the latest beta with my LCD configured properly and will check to see if the behavior still occurs.

Share this post


Link to post
Share on other sites

UPDATE: It actually turns out that my GPU temperature is actually correct and only the cpu and memory are wrong (-1 and 255). So I guess it has to do with Logitech being buggy with my motherboard?

Also as additional info, in the AIDA64 GUI, my temp for the CPU individual cores are correct, but the CPU overall shows -1 Celsius like I said. Then the entry for the memory temp is gone! It doesn't even show up which is why it shows 255 I guess. I reappears though if I restart the program.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...