Asus z590-F incorrect DIMM, VCCIO, VCCSA voltage.
I was tried newest beta version but same incorrect value.
And I'm using corsair RM1000 psu so I enabled corsair link sensor support but can't find sensor.
HWinfo64 show +12V current ampere and fan speed(only show when not 0rpm). What setting do I have to change in Aida64 extreme ?
How can I fix this issue ? Please, help me.
corsairlinkdump.txt ecdump.txt isasensordump.txt
I want to make a window appear with a message that the CPU temperature is exceeded.
can aida64 make a window appear with a message that the processor temperature is exceeded?
Hello. I assume that AIDA64 shows an incorrect CPU and motherboard temperature for my setup.
1) The difference between core temperature and CPU temperature is unrealistic.
2) 100 degrees idle motherboard\CPU temperature right after PC boot doesn't seem realistic as well.
3) I only have CPU temperature measurements in BIOS and it sticks around 20-25 all the time.
4) CoreTemp shows 30 degrees average for each core.
5) Motherboard doesn't seem boiling to the touch, it's actually quite chill and the fans blow out a cool air.
I'm still concerned that I can't see the realistic measurements, since I've built this PC myself and actually could make some flaws.
What may be the case? How can I see the real CPU/motherboard temperature?
PS: I'm using the latest software version
I have the asus strix x470-f with 5601 bios and an outdated version of aida64(from the start of 2020).
Chipset and Tsensor(watercooling loop temp for me) temps have stopped showing for a while now and I assumed it was from getting bios updates and not updating aida.
Installed latest beta (6.25.5462) and the problem persists. Asus Wmi and EC support are enabled (as i always had). Later i found out the following topic with the same problem(with olded bios than mine) that you are claiming to be an Asus issue , but sensors are showing in aisuite,hardwareinfo and other programs and only aida64 doesn`t seem to find them .
I have a problem with rams, they are indicated as on the screen in Aida64, while it will have to be A1, B1, C1, D1
and I have the temperature of the water plugged into the "Water In" port on the motherboard, but it indicates Temperature N°1 in Aida64
It is possible to rename in "Water" (the "In" and "Out" to put in Extended Labels) and it's "duplicate" with T-Sensor 1
Asus having made the effort to add these ports, as long as they are named correctly in Aida64
And for Water Flow, in bios it is indicated in l/m, in Aida64 it is indicated in RPM
Possible to have in l/m (see in l/h) in Aida64
And merry christmas