Jump to content
AIDA64 Discussion Forum
leghmoh

fixed: Asus Rampage VI Extreme Encore voltages

Recommended Posts

Hello,

Aida64 is reporting wrong VCCIN and DIMM AB and CD voltages, after overclocking.

CPU is Intel 10940X and Memory is Corsair Dominator Platinum RGB 3600 Mhz.

 

Thanks a Lot

 

Best Regards

Share this post


Link to post
Share on other sites
On ‎2‎/‎25‎/‎2020 at 10:49 AM, leghmoh said:

Aida64 is reporting wrong VCCIN and DIMM AB and CD voltages, after overclocking.

CPU is Intel 10940X and Memory is Corsair Dominator Platinum RGB 3600 Mhz.

Please right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> ISA Sensor Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first.

Also right-click on the bottom status bar of AIDA64 main window --> Sensor Debug --> Embedded Controller Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.


Thanks,
Fiery

Share this post


Link to post
Share on other sites

Hello,

here we go,

------[ Versions ]------

Program Version : AIDA64 Extreme v6.20.5300
BenchDLL Version: 4.5.816.8-x64
Windows Version : Microsoft Windows 10 Pro 10.0.18362.657 (64-bit)

------[ Motherboard Info ]------

Motherboard ID      : <DMI>
Motherboard Model   : Asus ROG Rampage VI Extreme Encore
Motherboard Chipset : Intel Kaby Point X299, Intel Cascade Lake-X

DMI MB Manufacturer : ASUSTeK COMPUTER INC.
DMI MB Product      : ROG RAMPAGE VI EXTREME ENCORE
DMI MB Version      : Rev 1.xx
DMI MB Serial       : 190957658100139
DMI SYS Manufacturer: System manufacturer
DMI SYS Product     : System Product Name
DMI SYS Version     : System Version
DMI SYS Serial      : System Serial Number
DMI BIOS Version    : 0505

ITE SuperIO Port           = 00h
ITE SuperIO HWMonitor Port = 0000h     (    0000h /     0000h)
ITE SuperIO HWMonitor MMIO = 00000000h (00000000h / 00000000h)
ITE SuperIO Device ID      = 0000h     (    0000h /     0000h)
ITE SuperIO Version        = 00h       (      00h /       00h)

Winbond SuperIO Port              = 2Eh
Winbond SuperIO HWMonitor Port/60 = 0290h (0290h / 0000h)
Winbond SuperIO HWMonitor Port/64 = 0A00h (0A00h / 0000h)
Winbond SuperIO Device ID         = D42Bh (D42Bh / 0000h)
Winbond Sensor ID A3/5C/reg$58    = FF / FF / FF

Fintek SuperIO Port           = 00h
Fintek SuperIO HWMonitor Port = 0000h (0000h / 0000h)
Fintek SuperIO Device ID      = 0000h (0000h / 0000h)

SMSC SuperIO Port           = 00h
SMSC SuperIO HWMonitor Port = 0000h (0000h / 0000h)
SMSC SuperIO Device ID      = 0000h (0000h / 0000h)

ASpeed SuperIO Port = 00h

------[ NCT6791 ISA Sensor Device at 0A00 ]------

0000  D4 7A D2 CB  D4 1A 99 D2  C3 40 4C 40  7C 1B 3E 78
0010  1C 1C 0E 0E  18 3A 60 25  D0 1B 1B 1B  1B 1B 1B 3F
0020  1C 02 99 99  99 99 99 FF  00 00 00 00  00 00 FF 1F
0030  10 0F FF 1F  FF 1F FF 1F  FF 1F 00 00  0A 01 00 00
0040  00 00 00 00  00 00 00 00  FF FF 1F FF  99 99 99 99
0050  99 FF 1D 80  00 00 00 00  00 00 00 00  00 00 00 00
0060  00 00 00 1B  00 FF FF 00  FF FF FF FF  FF FF FF 00
0070  00 1B 00 FE  00 1C 1C 00  FF FF FF FF  FF FF FF FF
0080  FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
0090  FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
00A0  00 FF 00 00  00 FF 00 00  FF FF FF FF  FF FF FF FF
00B0  FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
00C0  FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
00D0  FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
00E0  FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF
00F0  FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF

     10    11    12    13    1B    20    52    71    73    75
T:   28    28    14    14    28    28    29    28   255    28
T:   28    28    14    14    28    28    29    28   255    28
T:   28    28    14    14    28    28    29    28   255    28
T:   28    28    14    14    28    28    29    28   255    28
T:   28    28    14    14    29    28    30    29   255    28
T:   28    28    14    14    29    28    30    29   255    28
T:   28    28    14    14    28    28    30    28   254    28
T:   28    28    14    14    27    28    29    27   254    28
T:   28    28    14    14    27    28    29    27   254    28
T:   28    28    14    14    28    28    29    28   255    28

   0000 0001 0002 0003 0004 0005 0006 0007 0008 0009 000A 000B 000C 000D 000E 000F
V:  D3   7B   D2   CB   D4   1A   99   D2   C3   40   4C   40   7C   1B   3E   78   [ VID = 1.29102 V ]
V:  D3   7B   D2   CB   D4   1A   99   D1   C3   40   4C   40   7C   1B   3E   78   [ VID = 0.79199 V ]
V:  D3   7B   D2   CB   D4   1A   99   D1   C3   40   4C   40   7C   1B   3E   78   [ VID = 0.79260 V ]
V:  D3   7B   D2   CB   D4   1A   99   D1   C3   40   4C   40   7C   1B   3E   78   [ VID = 0.79260 V ]
V:  D3   7B   D2   CB   D4   1A   99   D1   C3   40   4C   40   7C   1B   3E   78   [ VID = 0.80603 V ]
V:  D4   7B   D2   CB   D4   1A   99   D1   C3   40   4C   40   7C   1B   3E   78   [ VID = 0.80017 V ]
V:  D4   7B   D2   CC   D4   1A   99   D2   C3   40   4C   40   7C   1B   3E   78   [ VID = 0.80652 V ]
V:  D4   7B   D2   CC   D4   1A   99   D2   C3   40   4C   40   7C   1B   3E   78   [ VID = 0.80603 V ]
V:  D4   7B   D2   CC   D4   1A   99   D2   C3   40   4C   40   7C   1B   3E   78   [ VID = 0.79321 V ]
V:  D4   7B   D2   CC   D4   1A   99   D2   C3   40   4C   40   7C   1B   3E   78   [ VID = 0.79382 V ]

------[ ACPI Temperatures & Fans ]------

_TZ_.THM0._TMP             : 
_TZ_.THM1._TMP             : 
_TZ_.THR0._TMP             : 
_TZ_.THR1._TMP             : 
_TZ_.TZ00._TMP             : 
_TZ_.TZ01._TMP             : 
_TZ_.RTMP                  : 
_TZ_.RFAN                  : 
_TZ_.RFAN(0)               : 
_TZ_.RFAN(1)               : 
_SB_.ATKD._HID             : 
_SB_.ATKD.TMPR             : 
_SB_.PCI0.LPC0.EC0_.CCTV   : 
_SB_.PCI0.LPC0.EC0_.LRPM   : 
_SB_.PCI0.LPC0.EC0_.HRPM   : 
_SB_.PCI0.SBRG.EC0_.ECPU   : 
_SB_.PCI0.SBRG.EC0_.TACH(0): 
_SB_.PCI0.SBRG.EC0_.TACH(1): 
_SB_.PCI0.SBRG.EC0_.TAH0   : 
_SB_.PCI0.SBRG.EC0_.TAH1   : 
_SB_.PCI0.SBRG.EC0_.ST00   : 
_SB_.PCI0.SBRG.EC0_.SC01   : 
_SB_.PCI0.SBRG.EC0_.SC02   : 
_SB_.PCI0.SBRG.EC0_.SC03   : 
_SB_.PCI0.SBRG.EC0_.SC04   : 
_SB_.PCI0.SBRG.EC0_.SC05   : 
_SB_.PCI0.SBRG.EC0_.SC06   : 
_SB_.PCI0.SBRG.EC0_.TH0R   : 
_SB_.PCI0.SBRG.EC0_.TH1R   : 
_SB_.PCI0.SBRG.EC0_.F0TS   : 
_SB_.PCI0.SBRG.EC0_.F1TS   : 
_SB_.PCI0.PIB_.EC0_.TCRT   : 
_SB_.PCI0.SBRG.EC0_.CTPM   : 
_SB_.PCI0.SBRG.EC__.CPUT   : 
_SB_.PCI0.SBRG.EC__.SYST   : 
_SB_.PCI0.LPC_.EC0_.CTMP   : 
_SB_.PCI0.LPCB.EC0_.CTMP   : 
_SB_.PCI0.LPC_.EC0_.TMP1   : 
_SB_.PCI0.LPC_.EC0_.TMP2   : 
_SB_.PCI0.LPC_.EC0_.TMPI   : 
_SB_.PCI0.LPC_.EC0_.TMPV   : 
_SB_.PCI0.LPCB.EC0_.A1TP   : 
_SB_.PCI0.LPCB.EC0_.A2TP   : 
_SB_.PCI0.LPCB.EC0_.FAN0   : 
_SB_.PCI0.LPCB.EC__.TS1R   : 
_SB_.PCI0.LPCB.EC__.TS2R   : 
_SB_.PCI0.LPCB.EC__.TS3R   : 
_SB_.PCI0.LPCB.EC__.F1FL   : 
_SB_.PCI0.LPCB.EC__.F1FH   : 
_SB_.PCI0.LPCB.EC__.F2FL   : 
_SB_.PCI0.LPCB.EC__.F2FH   : 
_SB_.PCI0.LPC_.H8EC.RTMP   : 
_SB_.PCI0.LPC_.H8EC.LTMP   : 
_SB_.PCI0.LPC_.H8EC.MTMP   : 
_SB_.PCI0.LPC_.H8EC.GTMP   : 
_SB_.PCI0.LPCB.H8EC.CTMP   : 
_SB_.PCI0.LPCB.H8EC.DTMP   : 
_SB_.PCI0.LPCB.H8EC.GTMP   : 
_SB_.PCI0.LPCB.H8EC.ITMP   : 
_SB_.PCI0.LPCB.H8EC.MTMP   : 
_SB_.PCI0.LPCB.H8EC.STMP   : 
_SB_.PCI0.LPCB.H8EC.PFAN   : 
_SB_.PCI0.LPCB.EC0_.OTPC   : 
_SB_.PCI0.LPCB.EC0_.VGAT   : 
_SB_.PCI0.LPCB.EC0_.CHPT   : 
_SB_.PCI0.LPCB.EC0_.CPUT   : 
_SB_.PCI0.LPCB.EC0_.SYST   : 
_SB_.PCI0.LPCB.EC0_.DTS1   : 
_SB_.PCI0.LPCB.EC0_.DTS2   : 
_SB_.PCI0.LPCB.EC0_.DIMM   : 
_SB_.PCI0.LPCB.EC0_.FANH   : 
_SB_.PCI0.LPCB.EC0_.FANL   : 
_SB_.PCI0.LPCB.EC0_.CUTP   : 
_SB_.PCI0.LPCB.EC0_.PHTP   : 
_SB_.PCI0.LPCB.EC0_.DIMT   : 
_SB_.PCI0.LPCB.EC0_.INLE   : 
_SB_.PCI0.LPCB.EC0_.PANT   : 
_SB_.PCI0.LPCB.EC0_.F0RM   : 
_SB_.PCI0.LPCB.EC0_.F0DT   : 
_SB_.PCI0.LPCB.EC0_.F1RM   : 
_SB_.PCI0.LPCB.EC0_.F1DT   : 
_SB_.PCI0.SBRG.EC0_.CUTP   : 
_SB_.PCI0.SBRG.EC0_.PHTP   : 
_SB_.PCI0.SBRG.EC0_.DIMT   : 
_SB_.PCI0.SBRG.EC0_.INLE   : 
_SB_.PCI0.SBRG.EC0_.PANT   : 
_SB_.PCI0.SBRG.EC0_.F0RM   : 
_SB_.PCI0.SBRG.EC0_.F0DT   : 
_SB_.PCI0.SBRG.EC0_.F1RM   : 
_SB_.PCI0.SBRG.EC0_.F1DT   : 
_SB_.SAMB.TMPC             : 
_SB_.SAMB.TMPH             : 
_SB_.STR0._TMP             : 
_SB_.STR1._TMP             : 
_SB_.STR2._TMP             : 
_SB_.STR3._TMP             : 
_SB_.STR4._TMP             : 
_SB_.STR5._TMP             : 
_SB_.STR6._TMP             : 
_SB_.STR7._TMP             : 
CPUT                       : 
GPUT                       : 
SYST                       : 
FANT                       : 
BATT                       : 

 

 

 

ecdump.txt

Share this post


Link to post
Share on other sites
On ‎3‎/‎10‎/‎2020 at 1:11 PM, leghmoh said:

hello,

Any solution for my issue???


Thanks.

Please upgrade to the latest beta version of AIDA64 Extreme available at:

https://www.aida64.com/downloads/latesta64xebeta

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works ;) 

Share this post


Link to post
Share on other sites

Hello,

VCCIN still seems to be wrong, I set it to 1.9 v in BIOS and it is showing 3.376 v in Aida64, VCCIO is set to 1.050 v in bios and it is showing 0.528 v in Aida64, the rest seems to be fixed.

Thanks

Share this post


Link to post
Share on other sites
On ‎3‎/‎18‎/‎2020 at 11:55 AM, leghmoh said:

Hello,

VCCIN still seems to be wrong, I set it to 1.9 v in BIOS and it is showing 3.376 v in Aida64, VCCIO is set to 1.050 v in bios and it is showing 0.528 v in Aida64, the rest seems to be fixed.

Thanks

Thank you!  Please upgrade to the latest beta version of AIDA64 available at:

https://www.aida64.com/downloads/latesta64xebeta

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know how it works.

Share this post


Link to post
Share on other sites
5 hours ago, leghmoh said:

Hello,

Working perfect, thanks a Lot.

Thank you for the feedback!

Share this post


Link to post
Share on other sites

Hello,

With new version of Aida64 6.25 the 12 volts is showing 20.352 volts and it has disappeared from sensor panel. 

Motherboard : Rampage VI Extreme Encore

Power Supply : Corsair AX1500i

Thanks

Share this post


Link to post
Share on other sites
On ‎4‎/‎9‎/‎2020 at 12:37 PM, leghmoh said:

Hello,

With new version of Aida64 6.25 the 12 volts is showing 20.352 volts and it has disappeared from sensor panel. 

Motherboard : Rampage VI Extreme Encore

Power Supply : Corsair AX1500i

Thanks

Make sure to upgrade to the latest beta version of AIDA64 Extreme available at:

https://www.aida64.com/downloads/latesta64xebeta

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By platonas
      Hi,
      I have the asus strix x470-f with 5601 bios and an outdated version of aida64(from the start of 2020).
      Chipset and Tsensor(watercooling loop temp for me) temps have stopped showing for a while now and I assumed it was from getting bios updates and not updating aida.
      Installed latest beta (6.25.5462) and the problem persists. Asus Wmi and EC support are enabled (as i always had). Later i found out the following topic with the same problem(with olded bios than mine) that you are claiming to be an Asus issue , but sensors are showing in aisuite,hardwareinfo and other programs and only aida64 doesn`t seem to find them .
       
       
    • By tistou77
      Hello

      I have a problem with rams, they are indicated as on the screen in Aida64, while it will have to be A1, B1, C1, D1


      and I have the temperature of the water plugged into the "Water In" port on the motherboard, but it indicates Temperature N°1 in Aida64

      It is possible to rename in "Water" (the "In" and "Out" to put in Extended Labels) and it's "duplicate" with T-Sensor 1
      Asus having made the effort to add these ports, as long as they are named correctly in Aida64
      And for Water Flow, in bios it is indicated in l/m, in Aida64 it is indicated in RPM
      Possible to have in l/m (see in l/h) in Aida64
      Thanks
      And merry christmas
    • By btmouse
      ASUS ROG all-in-one liquid CPU cooler ,
      https://www.asus.com/Cooling/ROG-RYUO-240/

      https://www.asus.com/Cooling/ROG-RYUJIN-360/
       

×
×
  • Create New...