Jump to content
AIDA64 Discussion Forum
  • Similar Content

    • By Soul--Reaver
      System:
      Asus Sabertooth Z77
      Intel 3770K
      Nvidia Geforce 1070
      Logitech Keyboard G510S
       
      Aida64 version: 6.25.5400
       
      I'm using the LCD in my keyboard and Aida64 to monitor certain system values.
      I've noticed that the CPU util percentages are not correct on the LCD display.
      The most obvious is that when the system is completely idle (CPU util.png), The LCD will never show a lower number then 28% for CPU7 Utilization (LCD CPU util.png) on the LCD.
      The other numbers are also weird or incorrect but that is more of a feeling i have. The other CPU utils feel weird because i never see 1% or 2%. It's always 10%, 11%, 12%, 14%, 22%, 28% etc. but never below 10% except 0%
      As shown in "CPU util.png" Aida64 is capable of getting the correct percentages, it just does not show them on the LCD display in my keyboard
      Kind regards
      Swen Kruiper


    • By neg12roni
      Didn't see a Beta forum so I'm posting here.
       
      The newest Beta 5357 doesn't load the LCD Items interface. All get in the upper left corner is the LCD icon and that's all. No Import/Export, nothing. This did not happen on any other beta version. It also happens if  I run it as a portable and not as an update to the install 5300 version.
    • By neg12roni
      Issue: Latest beta 5364 (and same as previous beta5357) does not load LCD items from Preferences menu.
      Expected Behavior: Running standard release of Aida64 Extreme (6.20 5300) and installing to latest beta all menu items that previously worked should continue to work
      Actual behavior: As upgrade from clean 6.20 (5300) install OR using as a portable version, the app fails to truly initialize the Beada LCD panel. LCD Items  under the Preferences menu do not populate.
       
       
    • By viperdsl
      Hello Guys, i hope you can help me. I have installed the Arx Software on phone and connected to the pc. I have acitvated Arx Control in AIDA64 and tried with a first element. My Problem is, that in the Logitech Gaming Software Arx, that the Aida64 applet is not shown. Can anyone help me with that?
    • By Grestorn
      Aquacomputer updated their Aquasuite the other day. With that update, they also updated the firmware of many of their hardware components, including the D5 Next to version 1014.
      Since that update, AIDA64 doesn't see the D5 Next's values anymore. 
      HWInfo still sees them, though, so the export must work technically, there seems to be some misalignment between AIDA64 and the D5 Next. 
      Other values of Aquacomputer's components are still showing up fine, only the D5 Next is affected (on my system). 
       
      In that regard, I'd still very much appreciate if it would be possible, to restrict the polling of all Aquacomputer's components, as this keeps stalling all other values in AIDA64, too. Aquacomputer seems to limit the polling to once a second, and for some reason that has the effect that all other components monitored by AIDA64 are also restricted to once a second, as soon as there are AC components in the system. 
      And I also remember that there was a checkbox on the "Stability" tab where you could disable the AC's components polling, but that's missing now for some reason?
       
      /edit: Added the Sensor Dump File!
      aquacomputerdump.txt
×
×
  • Create New...