Please add the CPU readings of:
Fclk, Uclk, Mclk
and makes us able to add them to the sensor panel.
As well as:
Gpu memory Temperature
Of AMD Radeon RX6000 series.
With HWinfo i can read/log them.
But why not with AIDA?
Aida64 extreme shows VCORE value the same as VID. I have set manual voltage and HWINFO64 reports 1.264V while AIDA64 reports 1.367. I see that this issue is frequent?
By Alvaro BaSa
Hi, I have never had any issues with my pc in the last 2 years. I currently own a i7-9700k, 32 gb of 3200 Ram, Gtx 1080 ti 11GB, Nzxt Kraken X52, Aorus z370 Gaming 3 Motherboard (latest f15b drivers), 4 120mm cpu fnas for intake and 2 for outake. I currently run my cpu at 4.6-4.7 all cores, no extra OC. PSU 850 80 plus Gold
So my usual temps are around 35c on idle and 65-75c under load. The other day I notices after a session of gaming that my cpu max temps had gone up to around 85c. It was weird as it had never happened. So I decided to do a couple stress tests to monitor results. So first I tested Linpack and at about 7 min through the test the cpu frequency dropped to 800mhz for a second and went back up to 4600. Cpu was under 100% load and temps where as high as 90-98c.
So I ran Aida64 and after about 10 min the same thing happened. Only with Aida the temps weren't that high. Gpu temps where stable across the board, no issues whatoever.
So I am no expert, and I need help as to why this may happen.
Thanks in advance for any help and let me know if there is more info I can provide.