Jump to content

Report

  • Similar Content

    • By Glowing1196
      Why the CPU benchmark can't support Xeon 6248R?
       

    • By Bjoern_GMX
      Please add the CPU readings of:
      Fclk, Uclk, Mclk 
      and makes us able to add them to the sensor panel.
      As well as:
      Gpu memory Temperature
      Of AMD Radeon RX6000 series.
       
      With HWinfo i can read/log them.
      But why not with AIDA?
       
      Cheers
      Bjoern
    • By temeza
      Hi,
      Aida64 extreme shows VCORE value the same as VID. I have set manual voltage and HWINFO64 reports 1.264V while AIDA64 reports 1.367. I see that this issue is frequent?
      Best Regards,
      Teemu
    • By Alvaro BaSa
      Hi, I have never had any issues with my pc in the last 2 years. I currently own a i7-9700k, 32 gb of 3200 Ram, Gtx 1080 ti 11GB, Nzxt Kraken X52, Aorus z370 Gaming 3 Motherboard (latest f15b drivers), 4 120mm cpu fnas for intake and 2 for outake. I currently run my cpu at 4.6-4.7 all cores, no extra OC. PSU 850 80 plus Gold
      So my usual temps are around 35c on idle and 65-75c under load. The other day I notices after a session of gaming that my cpu max temps had gone up to around 85c. It was weird as it had never happened. So I decided to do a couple stress tests to monitor results. So first I tested Linpack and at about 7 min through the test the cpu frequency dropped to 800mhz for a second and went back up to 4600. Cpu was under 100% load and temps where as high as 90-98c.
      So I ran Aida64 and after about 10 min the same thing happened. Only with Aida the temps weren't that high. Gpu temps where stable across the board, no issues whatoever.
      So I am no expert, and I need help as to why this may happen.
       
      Thanks in advance for any help and let me know if there is more info I can provide.



    • By Haroon Rehman
      There are so many temperatures are showing in thermal how can I know that what is my CPU temperature?

×
×
  • Create New...