Jump to content
AIDA64 Discussion Forum
kaTus

MSI MEG Z490 Unify + i7-10700K memory benchmark results are all zero

Recommended Posts

On 8/19/2020 at 7:50 PM, kaTus said:

Hello,

got this after doing benchmark, but run stable at MemTest.

Any ideas? ;)

Make sure to upgrade to the latest beta version of AIDA64 Extreme available at:

https://www.aida64.com/downloads/latesta64xebeta

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

Let me know if it helps.

Share this post


Link to post
Share on other sites

I have the same issue, it will not work with any of the beta or stable version, I tested the stable and like 10 lastes beta versionsn and non of them working correctly

 

I have tested 3 different motherboards, 2 different pack of memory ram 

 

Sometimes very rare it will work, but 90% of the time is show 0 for that memory test.

Also show o at CPU test like sandra and others, ( from the left side )

Share this post


Link to post
Share on other sites
7 hours ago, BenchAndGames said:

I have the same issue, it will not work with any of the beta or stable version, I tested the stable and like 10 lastes beta versionsn and non of them working correctly

I have tested 3 different motherboards, 2 different pack of memory ram 

Sometimes very rare it will work, but 90% of the time is show 0 for that memory test.

Also show o at CPU test like sandra and others, ( from the left side )

Thank you, but please avoid posting a single issue into multiple topics.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By Razvan
      I am encountering this very strange bug. If I use Aida64 Cache&Memory Benchmark in Windows 10 I get a specific Ram benchmark result, let's say 48100 MB/s read / 53600 MB/s write /  47700 MB/s copy and 52 ns latency. However, if I am booting from an USB live Windows 10 CD (WinPE), I am getting drastically better results, such as 55000 MB/s read / 61300 MB/s write / 55000 MB/s copy / 45 ns latency.
      I am not changing any bios / RAM XMP / Ram memory timings settings between reboots, only booting from either main Win 10 installation or WinPE 10 live usb.  I am using the same Aida64 version in both cases.
      I am scratching my head, what can explain the huge difference between the results? In both cases, cpu usage is idle and no other background programs are running when doing the tests.
    • By Tamizharasu
      Aida64 crash on when start benchmark gpu its crashing when it comes to memory copy 
    • By 李玄丹
      HI
      I have 6  Supermicro platforms, and I found the following problems when using AIDA64-620 version test.
      1. On the motherboard of the Supermicro X11 series, the memory SPD information cannot be obtained
      2. On the Supermicro X11 series motherboard, running the system stablity Test will be suspended for 15 minutes, and then resumed.
      3. The memory speed test is not up to standard. The bandwidth obtained through the calculation formula should be 230G / s, but the result obtained through the AIDA64 test is only 160G / s. Our bandwidth calculation formula may be wrong. Can you provide a calculation Formula for bandwidth.
      Bandwidth = memory core frequency × number of memory bus bits × multiplication factor
      OS: windows 10 Professional Workstation Edition
      platforms:8049U-E1CR4T/BIOS 3.2/BMC 1..71/CPLD Version     04.b1.06
      motherboard:X11QPH+
      CPU:4 * 6254
      memory:12 * M393A4K40BB2-CTD6Y
      RAID: 9361-8i
      GPU:Quadro P2000 
      ssd:1* SSDPE2KE016T801

    • By Lustrous
      So, basically, I installed the app on my Sony Xperia Z3(D6603) and when I check the camera info I don't get to see which camera sensor my phone is currently using. I'm currently running Android Marshmallow 6.0.1. Is this normal? 

    • By iCoffeeCat
      Thermal only shows battery
      Left sectional panel blue indicator doesn't move when selecting another panel. Will send screenshots if you'd like.
×
×
  • Create New...