Jump to content

AIDA64 not showing all sensors (Asus ROG Strix TRX40-E Gaming)


Recommended Posts

Hi,

Just built a new system using the an ASUS ROG Strix TRX4-E Gaming MB, while most senors are seen it does not show Chassis #3 fan or the SMART information for 3 of the M.2 drives.

These drives are current in a Storage Spaces Pool and are mounted in a Hyper M.2 X16 v2 card - 2 x 970 and 1 x 960).

These sensors are seen by HWiNFO64 - see screen shots.

I have updated to 6.25.5483 Beta and rebooted, also made sure there are not other monitoring probgrams active.

Thanks

Trevor

 

image.thumb.png.7c83f049d5100e35ec46c0cea8297de4.png

image.thumb.png.ba67f7de8985f3a8aca58ff439bce69e.png

 

CoolingFansDebug.txt

Link to post
Share on other sites
12 hours ago, TrevorN said:

Hi,

Just built a new system using the an ASUS ROG Strix TRX4-E Gaming MB, while most senors are seen it does not show Chassis #3 fan or the SMART information for 3 of the M.2 drives.

These drives are current in a Storage Spaces Pool and are mounted in a Hyper M.2 X16 v2 card - 2 x 970 and 1 x 960).

These sensors are seen by HWiNFO64 - see screen shots.

I have updated to 6.25.5483 Beta and rebooted, also made sure there are not other monitoring probgrams active.

Thanks

Trevor

Thank you, we'll fix the missing fan issue in the next AIDA64 beta update.  As for the missing SMART information, please right-click on the bottom status bar of AIDA64 main window --> Disk Debug --> RAID Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post. You may need to enable status bar in AIDA64 / main menu / View first.

Also right-click on the bottom status bar of AIDA64 main window --> Disk Debug --> SMART Dump. Copy-paste the full results into this topic, or attach the results as a TXT file to your post.


Thanks,
Fiery

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Similar Content

    • By owcraftsman
      I have waited long enough been patient since June monitoring a couple threads here on the same issue. Rather than post in them like some others and be forgotten I issue this reset.
      I have a EVGA GeForce GTX 1080 Ti FTW3 ELITE GAMING BLACK, 11G-P4-6797-K2
      Neither Aida64 ver. 5.92.4300 or  5.92.4391 Beta  show 1/2 of the sensor data available through GPUz, Precision XOC or HWiNFO64 
      I saw it suggested in another thread where it works with Precision running and or newest Nvidia drivers.
      To be clear sensor data is missing whether Precision is running or not and the latest Nvidia Driver is installed which makes no difference.
      This is becoming quite annoying. When we will see this fixed?
      my nvidiasmbusdump.txt is attached.
      The screen shots make it clearer.

       

      Edit: 11/20/2017
      Thought I should add It was also mentioned to try the latest beta but as you can see from the screen above that's exactly what I tried. 
       
      nvidiasmbusdump.txt
×
×
  • Create New...