Trymin 2 Posted August 20, 2020 Report Share Posted August 20, 2020 On 7/20/2020 at 10:08 PM, Сергей Коняхин said: GAMER_V2_1280x800.oslcd 2.45 MB · 149 downloads Hey all, new to the site and I have been trying to modify this so that it will fit on my 1024x600 monitor but I have no idea what I am doing haha. I have tried for hours to get this correct but to no avail. Is there anyone that can maybe help me out a bit, or do people do these on commission or something? Just want to get this to fit on the monitor and preferably change it to a nice forest green like I have in the attached photo. If anyone has tips/tricks to change this efficiently or a program that I can use to help along the way that would be great. Also, if anyone is willing to help that would be great too. This is the first PC that I have built in almost 10 years and want to do something cool with it (i.e. this) and clinical rotations leave me with very little time to mess with this. Any help is greatly appreciated! Quote Link to post Share on other sites
imaxxi 3 Posted August 21, 2020 Report Share Posted August 21, 2020 1 hour ago, Trymin said: Hey all, new to the site and I have been trying to modify this so that it will fit on my 1024x600 monitor but I have no idea what I am doing haha. I have tried for hours to get this correct but to no avail. Is there anyone that can maybe help me out a bit, or do people do these on commission or something? Just want to get this to fit on the monitor and preferably change it to a nice forest green like I have in the attached photo. If anyone has tips/tricks to change this efficiently or a program that I can use to help along the way that would be great. Also, if anyone is willing to help that would be great too. This is the first PC that I have built in almost 10 years and want to do something cool with it (i.e. this) and clinical rotations leave me with very little time to mess with this. Any help is greatly appreciated! Your monitor (1024X600) ratio isn't 1:1 to original 1280x800. Horizontal ratio = 1024/1280 = 0.8 Vertical ratio = 600/800 = 0.75 In your case, vertical fit is better but your horizontal will be left blank on both sides, 32 pixel each side ((1024 - 1280*0.75)/2 ) After import the file, go into each component and edit the X and Y position by multiply 0.75. Don't forget to change background resolution too. Those 6 circle gauges probably need to resize too. Quote Link to post Share on other sites
Сергей Коняхин 28 Posted August 21, 2020 Report Share Posted August 21, 2020 Change the extension to (.sensorpanel) and launch it on the desktop then you can drag and drop elements with the mouse. Duplicate the background image for yours so that it is the second count in order to determine the size. Then change the size of the sensors and fonts according to the advice above and align everything to the grid. In the end, change the resolution to your own in the settings. извиняюсь за ошибки пишу через переводчик Quote Link to post Share on other sites
inelastic 1 Posted August 22, 2020 Report Share Posted August 22, 2020 On 7/12/2020 at 3:24 PM, Gabe Zalewski said: For sure. I'll send you the sensor panel file but also the PSD file. I made the hardware labels as part of the static background so you might have to change or hide those layers in the original PSD file to match your system. It also is already in 800*480 so no resizing needed! Neon HUD v2.sensorpanel 1.7 MB · 66 downloads HUD_Panel_v2.psd 2.77 MB · 61 downloads Thanks for posting this. I was able to make one based off of it to suit my needs. 1 Quote Link to post Share on other sites
Grainger 14 Posted August 22, 2020 Report Share Posted August 22, 2020 On 7/30/2020 at 4:24 PM, levedog said: I use an 8.8-inch screen with a resolution of 1920*480, which is very suitable for this job. May I ask where you got the frame (btw. the backplate) for the display from? Quote Link to post Share on other sites
eDooM 2 Posted August 22, 2020 Report Share Posted August 22, 2020 On 8/18/2020 at 1:35 PM, tatoone said: This is my PC with AIDA display. Can yor share your config? 2 Quote Link to post Share on other sites
Trymin 2 Posted August 23, 2020 Report Share Posted August 23, 2020 Ok, finally took the time out one night to fully mess around with this. Thank you to Tenshi for posting his sensor panel and also Cepren for the several of his that he posted. I used bits and pieces from each and tried to mix the layouts as best I could for what I am looking for most. Made two different versions of this, hope you guys enjoy it. My 7" monitor also adjusts the colors slightly too so I tried to correct for that as best I could. If I can take the time out to figure out how to change the gauges Ill make the ones on the grey screen look better. Also just wondering, but my FPS counter just stopped working randomly today. I have both RTSS and Fraps, normally run it off of Fraps, and it just stopped working. Anyone have this happen to them before and if so how did you fix it? CustomgreenTrymin.sensorpanel CustomgreyTrymin.sensorpanel 2 Quote Link to post Share on other sites
Сергей Коняхин 28 Posted August 24, 2020 Report Share Posted August 24, 2020 https://drive.google.com/file/d/1p9qEVk5aYPJVnsMUiVwr1kiSQTGYTK2z/view?usp=sharing https://drive.google.com/file/d/16THxnyfpaUrqlX2fdOcQfTNSoBvuztY2/view?usp=sharing 3 Quote Link to post Share on other sites
Liao Joey 58 Posted August 27, 2020 Report Share Posted August 27, 2020 On 7/30/2020 at 10:24 PM, levedog said: I use an 8.8-inch screen with a resolution of 1920*480, which is very suitable for this job. I am very interested in how you can mount the device on the display. Can you share the mounting method and package? THANKS ! 2 Quote Link to post Share on other sites
Mani Demos 0 Posted August 27, 2020 Report Share Posted August 27, 2020 It looks like he used two GoPro (Action Camera) 3M mounts to glue them to his monitor and the small LCD display. Quote Link to post Share on other sites
Grainger 14 Posted August 27, 2020 Report Share Posted August 27, 2020 1 hour ago, Mani Demos said: It looks like he used two GoPro (Action Camera) 3M mounts to glue them to his monitor and the small LCD display. May be. But I want to know from where he get the plastic-case for the display. I cut a plastic picture frame (it's more an experiment) and it works, but it looks not 'professional' enough. Quote Link to post Share on other sites
vettahead 2 Posted August 27, 2020 Report Share Posted August 27, 2020 Hi All, new to AIDIA. I was using pikitapp before yesterday so had a play with the features. Loving it so far. time to get some heavy duty photoshop work done. One thing is how the hell do i get FPS? 2 Quote Link to post Share on other sites
Mani Demos 0 Posted August 27, 2020 Report Share Posted August 27, 2020 RTSS sensor is used with conjunction with Riva Tuner software to get your FPS to display. it comes with Unigine Superposition or you can install it separately and has to be running. Quote Link to post Share on other sites
vettahead 2 Posted August 28, 2020 Report Share Posted August 28, 2020 Quote RTSS sensor is used with conjunction with Riva Tuner software to get your FPS to display. it comes with Unigine Superposition or you can install it separately and has to be running. i have rivatuner server allready, ill dig about. Quote Link to post Share on other sites
Liao Joey 58 Posted August 28, 2020 Report Share Posted August 28, 2020 17 hours ago, Grainger said: May be. But I want to know from where he get the plastic-case for the display. I cut a plastic picture frame (it's more an experiment) and it works, but it looks not 'professional' enough. ---- I just order the 8.8 inch lcd from Taobao..after I get the LCD .then I will find a way to mount it on the monitor.. Maybe my friend’s factory can help.... 1 Quote Link to post Share on other sites
Mani Demos 0 Posted August 28, 2020 Report Share Posted August 28, 2020 4 hours ago, vettahead said: i have rivatuner server allready, ill dig about. Also in the Aida64 preferences, you have to tick off the RTSS box in the External Applications Tab. FPS will show 0 until you play a game then it will start logging Quote Link to post Share on other sites
cris71 0 Posted August 28, 2020 Report Share Posted August 28, 2020 hi, can someone tell me why using custom gauge two numerical counters appear. is there a way to hide or delete the external one? thank you Quote Link to post Share on other sites
tatoone 3 Posted August 28, 2020 Report Share Posted August 28, 2020 On 8/23/2020 at 1:02 AM, eDooM said: Can yor share your config? 1280 x 720_AIO_RED.sensorpanel 1 Quote Link to post Share on other sites
Grainger 14 Posted August 29, 2020 Report Share Posted August 29, 2020 Work in progress: the binary clock and the weather widget is from Rainmeter (I changed only the color). 2 Quote Link to post Share on other sites
levedog 25 Posted August 29, 2020 Report Share Posted August 29, 2020 On 8/28/2020 at 1:39 AM, Grainger said: May be. But I want to know from where he get the plastic-case for the display. I cut a plastic picture frame (it's more an experiment) and it works, but it looks not 'professional' enough. Hi! in fact, This screen originally comes with an original metal casing, like this: I bought this screen（Screen + metal shell） from Taobao: https://item.taobao.com/item.htm?spm=a1z09.2.0.0.4f972e8dsnWXmG&id=615817512455&_u=tcvbl94992 1 Quote Link to post Share on other sites
levedog 25 Posted August 29, 2020 Report Share Posted August 29, 2020 On 8/28/2020 at 3:06 AM, vettahead said: Hi All, new to AIDIA. I was using pikitapp before yesterday so had a play with the features. Loving it so far. time to get some heavy duty photoshop work done. One thing is how the hell do i get FPS? Great! I also like it very much. 1 Quote Link to post Share on other sites
Grainger 14 Posted August 29, 2020 Report Share Posted August 29, 2020 3 hours ago, levedog said: Hi! in fact, This screen originally comes with an original metal casing, like this: I bought this screen（Screen + metal shell） from Taobao: https://item.taobao.com/item.htm?spm=a1z09.2.0.0.4f972e8dsnWXmG&id=615817512455&_u=tcvbl94992 Thanks for the reply. I will try to order this from Taobao, but the site is only in chinese and so I must use google translator. I'm not shure if Taobao delivers to germany. Quote Link to post Share on other sites
chmarr 11 Posted September 1, 2020 Report Share Posted September 1, 2020 On 8/29/2020 at 5:52 PM, Grainger said: Thanks for the reply. I will try to order this from Taobao, but the site is only in chinese and so I must use google translator. I'm not shure if Taobao delivers to germany. found this on amazon https://www.amazon.co.uk/Stretched-advertising-screen-Supermarket-support/dp/B089215JWB/ref=sr_1_fkmr0_1?dchild=1&keywords=Hancai+8.8-inch+bar+screen+HSD088IPW1+resolution+480X1920+computer+secondary+screen+driver+HDMI+input&qid=1598962418&sr=8-1-fkmr0 https://www.amazon.co.uk/s?k=Stretched+Bar+LCD&ref=nb_sb_noss_2 Quote Link to post Share on other sites
Jake13942 1 Posted September 3, 2020 Report Share Posted September 3, 2020 Modified one of the SensorPanels from here to portrait. SensorPanel2020-09-03.sensorpanel Quote Link to post Share on other sites
Monkeys86 4 Posted September 3, 2020 Report Share Posted September 3, 2020 On 12/7/2020 at 22:24, Gabe Zalewski said: Di sicuro. Ti mando il file del pannello del sensore ma anche il file PSD. Ho creato le etichette hardware come parte dello sfondo statico, quindi potresti dover modificare o nascondere quei livelli nel file PSD originale per adattarli al tuo sistema. Inoltre è già in 800 * 480 quindi non è necessario ridimensionare! Neon HUD v2.sensorpanel 1,7 MB · 112 download HUD_Panel_v2.psd 2,77 MB · 103 download hello is it possible to have it without the written ryzen 5, shappire, msi, leadex ?? please?? always 800 + 480 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.