Jump to content
AIDA64 Discussion Forum
AVGVZT0

10900k throttling with all tests enabled. Normal?

Recommended Posts

Hello. My cpu idle temps are around 30 degrees, but when running the stress test (all turned on) my CPU overheats and throttles...


My system specs are:
i9 10900KF (I didn't overclock it)

Noctua D15

RTX 2070

32GB G.Skill 3600Mhz RAM

1000w Platinum PSU

Gigabyte Z490I AORUS ULTRA Mini ITX

Is this normal? I literally rebuilt the PC 5 times by now, reapplied thermal paste to a different one, made sure all cables are properly attached, etc.
With prime95 and OCCT I get lower temps and doesn't throttle, but with AIDA with all turned on it does. And with only FPU if throttles even faster.

 

I don't get a BSOF or ant error message. I didn't tried leaving the test run for longer after seeing the "overheating"/throttling message because of being scared of damaging the cpu.

Please help! I'm scared :(

Capture.PNG

Share this post


Link to post
Share on other sites
On 11/5/2020 at 12:43 PM, AVGVZT0 said:

Hello. My cpu idle temps are around 30 degrees, but when running the stress test (all turned on) my CPU overheats and throttles...


My system specs are:
i9 10900KF (I didn't overclock it)

Noctua D15

RTX 2070

32GB G.Skill 3600Mhz RAM

1000w Platinum PSU

Gigabyte Z490I AORUS ULTRA Mini ITX

Is this normal? I literally rebuilt the PC 5 times by now, reapplied thermal paste to a different one, made sure all cables are properly attached, etc.
With prime95 and OCCT I get lower temps and doesn't throttle, but with AIDA with all turned on it does. And with only FPU if throttles even faster.

I don't get a BSOF or ant error message. I didn't tried leaving the test run for longer after seeing the "overheating"/throttling message because of being scared of damaging the cpu.

Please help! I'm scared :(

It's actually normal.  Our i9-10900K (stock settings) exhibits throttling even with a big-*ss cooler that's rated for 250W TDP.  So you have nothing to worry about.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By KushRajput
      Hey there,
      I recently purchased asus vivobook s15 s510un it comes with i7 8550u, 8gb ddr4 ram, 1tb hdd and mx150.
      It runs so slow because of hdd so i purchased a m.2 ssd and a 8gb ram stick, I know a guy who works in asus i called him and he upgraded my laptop, then I remember that stock thermals are not so impressive, so I said him to change my thermal paste with arctic mx4, so this guy wiped my old thermal paste just once actually he doesn't did a good job in wiping thermal and he applied mx4 in too much quantity from that time if i game(hitman or csgo) it reaches 99 celsius(it's not like it reaches at 99 and then it drops, continuous on 99 celsius during gaming and stress test) so I decided to run aida64 test and the test shows me overheating and cpu throttling(42%).
      So, If I will change my thermal paste again, this time with good wiping and apply mx4 in good quantity, then what you guy think will my laptop's overheating solve after that ?
      Note: When I did stress test in aida64 before changing thermal paste everything was working good no overheating and throttling.
      Here is a screenshots 
       
       

×
×
  • Create New...