By Klimentiy Kulapov
I was testing my system memory and got a warning 20 seconds after the test started, I also recently got a blue screen twice with an error of memory management. And all of above started when i bought the second ram module Kingston ValueRAM [KVR16N11/8] , btw the first one is exactly same. Idk what to do, I`ve already tried to reinstall them and it gives same result.
My motherboard is GA-H81M-S1 rev 2.0
First time posting to the forum, indeed it is my first time viewing the forum. Ive been using the Engineer version of Aida64 (registered) for about 3 months now, and overall Im impressed with the software. Its nice to just throw together a few different benchmarks and have them run how and when I want in the order I want. I was doing all this with macros before
Ive recently gotten back into building PCs, took a long hiatus back in the late 90s my last system having been assembled was a 440BX based chipset on an Abit motherboard, both of which no longer exist at least in a meaningful way lol. I was an OC neophyte back then, as I am now, although I do enjoy the hobby/sport(?)
I decided to wade into the dark and murky waters of RAM OCing, and went down that rabbit hole for a few weeks. Long story short, I bought 2 x 16GB sticks of G.Skill 3600mhz XMP mem. Stock timings sucked at 19-20-20-40-500 but I didnt know or care much about timings at the point I bought and assembled the system and so didnt realize their huge impact (relatively speaking) on ram performance.
I was able to get them to post at 4000mhz 17-22-22-36-485 and ran that for a few months, then last night got the idea to try and tweak them some more, thinking maybe all these on off cycles might have trained them to do better (i dont know if that logic is incorrect or not in regards to training, but its how I justified another sweaty night of swearing out loud and smashing keys to my wife)
Im now resting at 4000mhz 16-22-22-40-500 but I can feel they have more to give in the timings department. Frankly, im already amazed at how well these Hynix CJR chips are doing on the OC. My question is basically, Aida shows me as being first place in Latency, and near top tier in every memory bench, with only quad channel or server boards (mostly) beating me. Are these results typical for these chips and my rig? What can I do to push it further if anybody has any recommendations? And am I correct in feeling a sense of accomplishment at being in the top spot for latency, or is my joy tragically misplaced?
Thanks a lot guys, and to the Devs, great product and I will continue to use and support you!
Relevant Screens attached.
Hey guys, there is something strange happened.
ryzen1700, asus b350 plus, bios version 0805(latest), windows 10 version 1703(latest)
Bios default settings, everything is fine.
Bios optimized settings, which is only overclocking CPU to 3.65ghz( memory clock is default 2133) . And I can't complete the Cache and Memory Benchmark, my computer black out during the copy phase every time. The system stability test works fine, the CPU temperature maintained about 61°.
How can I fix it?
I recently built my new rig and I am running some stress tests on my system to ensure stability. Everything works fine when using Asus' ROG RealBench software but when I use AIDA64 I start running into issues. The first time I ran AIDA64 I ran the stress test with stock preferences and settings for the trial version and the CPU, FPU, Cache, Memory, and GPU boxes checked. The test ran for 4 1/2 hours before a hardware failure was detected. I then tried running the test again and this time it only lasted 20 minutes. I then unchecked the 'Stress GPU' box and tried again, and it only lasted about 20 minutes again. I am now running the test without the 'Stress Memory' box checked as well now (leaving only CPU, FPU, and Cache left checked) and it's been 2 hours with no faults yet.
My guess is that it has something to do with my RAM, but I have no idea as to why or how. And if it is my RAM causing issues, is it a fatal error or will I be ok and I should just move on? Is there anything I can do to fix this? I am including some screen shots of my system specs and numbers.
On the picture with the red circle around my RAM speed, just ignore that, my memory is actually running at 3000 (I am using G. Skill Ripjaws V DDR4-3000 RAM) as you can see in the CPU-Z pics. On the screenshot of my BIOS settings, on the line for my DRAM Frequency, that has also been changed to Auto instead of [DDR4-3000 30x10...]
Let me know if I need to provide any more info. I do not really know how to use AIDA64 so this is new to me.
UPDATE: The stress test on the CPU, FPU, and Cache has been running for 11 hours now. I am now fairly certain that my hardware failure had to do with my memory during it's stress test. Will this cause a problem later on or should I just leave it alone?
UPDATE 2: Sadly the stress test failed at 11 hours 28 minutes. I'm not really sure what I should try next. Screenshots of failed test is now also attached. Any tips on what I can do to make this more stable would be much appreciated.
Hi there. If this isn't the right place to be posting something like this I completely understand. Apologies! My memory is posting terrible speeds from the Aida64 Cache & Memory benchmark which has sent me on a wild goose hunt! I then checked CPU Queen and that test seemed correct.
I then checked CPU Photoworxx and that gave me results near the bottom of the list at 1200 MPixel/s when I should be getting around 26000+ MPixel/s. I'm using Corsair Vengeance LPX 32GB (4 x 8GB) DDR4 DRAM 2400MHz (PC4-19200) C14 (CMK32GX4M4A2400C14)) Quad channel configured in A1 B1 C1 D1. I have done a BIOS flash to the latest version (2101). I was using 1901 before. On both BIOS versions I have tried default factory RAM setup (2133) in BIOS as well as the auto & manually configuring XMP 2400 profile @ 14, 16, 16, 31 2T @ 1.200v that it was sold and packaged as. I've tried removing all overclocks and reverting to the original "Optimised defaults" in BIOS. My FPS in games has been about 50% of what it should be. Initially I thought it was GPU but I noticed in Firestrike my CPU Physics test was very poor and so then I thought it was CPU. But now that I've seen this stuff going on with the RAM it looks like it could be the culprit? Any help would be greatly appreciated!!! I've attached CPUID MSR dump to this post too. AIDA64 Memory benchmark result >> . CPU-Z screenshots of Memory & SPD tabs can be seen here >> I then wondered if memtest86+ would see anything but it ran for 10hrs. 11/11 tests completed with 0 errors. You can see the memory is top left is going at 1924 mb/s without overclocks. Memtest86+ results: PC Specs: **CPU** Intel Core i7 5820k (OC 4.4ghz @ 1.22v) Latest BIOS 2101 **CPU COOLER** Corsair H110i GTX **MOTHERBOARD** Asus X99-A/USB 3.1 ATX LGA2011-3 **MEMORY** Corsair Vengeance LPX 32GB DDR4-2400 **VIDEO CARD** EVGA GeForce GTX 980 Ti 6GB HYBRID **STORAGE** Samsung 850 EVO-Series 500GB SSD **PSU** EVGA SuperNOVA 1000G2 1000W ------------------ System Information ------------------ Time of this report: 4/12/2016, 02:01:09 Machine name: XXXXXXX Operating System: Windows 10 Pro 64-bit (10.0, Build 10586) (10586.th2_release_sec.160223-1728) Language: English (Regional Setting: English) System Manufacturer: ASUS System Model: All Series BIOS: 2101 Processor: Intel® Core i7-5820K CPU @ 3.30GHz (12 CPUs), ~3.3GHz Memory: 32768MB RAM Available OS Memory: 32668MB RAM Page File: 2739MB used, 34793MB available Windows Dir: C:\WINDOWS DirectX Version: 12 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled Miracast: Available, with HDCP Microsoft Graphics Hybrid: Not Supported DxDiag Version: 10.00.10586.0000 64bit Unicode ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. cpuidmsrdump.txt