Jump to content

Report

  • Similar Content

    • By WanaGo
      Hello,
      I hope this hasn't already been covered, not found this exact question though already asked.
      4D Systems makes a bunch of LCD products which mainly have UART interfaces. They are not primary display interfaces, so don't take an HDMI input etc from your PC, they can be programmed to handle serial data and display it in various ways. You design the GUI yourself in their IDE and then you feed it the data you want in the known format, and make it do what you like with that data.
      What I am trying to find out is if there is a way to use AIDA64 to collect the data from the PC, such as CPU temperature etc, and send the data out the UART to the display. I don't want all the graphics from AIDA64, all I want is the data for the sensors.
      I have used AIDA64 for a while, going to a external HDMI monitor and displaying data on that, and it works, but now and then I get issues where windows decides the little monitor is the primary, or the mouse goes in there and gets stuck, and all sorts of other weird things. I also dont want it loading my GPU at all, I just want it off that whole system entirely.
      Is there a way to have AIDA64 export in a stream the selected Sensor data, to the serial UART? These 4D displays can handle BAUD's into the MBaud rates, so not 9600 or 115200 type levels.
      If there is, can you please point me in the right direction.
      If there is a way to get this data, I can create a demo project use a 4D Systems display, and post that up here for other people to use as a base. I have used 4D displays for years in various applications at work and around the house, we build full systems at work using their products, and it just seems the perfect application for PC Chassis builds, rather than using HDMI type solutions off the GPU. Let the display do the GUI 'heavy lifting' itself with its GPU and just feed it the data it is looking for from AIDA64.
      Any tips would be appreciated
      Regards
      W
    • By nounou360
      hi, i have a problem with my temperature sensors. It is detected in the software diode GPU temperature and also Temperature 1 is my NZXT kraken cooling wather. My problem is the following: when I select these two values to place it in my monitor for the spec it falls in (TRIAL). But it is well detected in the software in sections sensor, the temperature and the values are good.

    • By Bjoern_GMX
      Please add the CPU readings of:
      Fclk, Uclk, Mclk 
      and makes us able to add them to the sensor panel.
      As well as:
      Gpu memory Temperature
      Of AMD Radeon RX6000 series.
       
      With HWinfo i can read/log them.
      But why not with AIDA?
       
      Cheers
      Bjoern
×
×
  • Create New...