Jump to content
AIDA64 Discussion Forum
  • Similar Content

    • By Ventilator
      Would be nice if you could rotate output 90 degrees in AIDA 64 LCD config for Logitech ARX.
      This, so you can get tablet mode.
       
    • By Roy
      Hi,
      it would be nice if there was the possibility to send sensor values unformatted as a number or percentage, via a serial port.
      Similar to the LCD displays, only without formatting, or pure numbers with separators.
      Together with a small GUI.
      Background is the simple evaluation of the data with a microcontroller and display in different ways.
      I imagine not only LCD or OLED, but rather seven segment display, nixi tubes or an analog pointer display. That would create a lot of possibilities.
    • By Wampo
      Hey Aida Team,
      i have some issues with this Adafruit LCD wich is recomended. On the two Pictures you can see what aida should do and what can i see on the Display. The First line is completely erased and the screen is flickering. The Adafruit Backpack is set to 20x4 LCD. When the Display is updating you can see the right setting for a millisecond.
      But if i change the LCD Setting in AIDA to 16x2, and leave the Backpack in 20x4 mode,  the Screen isn flickering and the first line is there. I think you got a little problem with the 20x4 Driver. I have Searched for the code but i cant find it, to edit it if i found the failure. 
       
      Please give me response for this BUG. I have extra ordert this overpriced 50€ LCD for it. 
      Greetings Daniel from Germany


      VID_20181129_160917.mp4
    • By Fiery
      We've added support for RoboPeak RPUSBDisp color graphical USB-connected LCD display.

      You can enable the LCD device from AIDA64 / main menu / File / Preferences / Hardware Monitoring / LCD / RoboPeak. Currently there is no Windows driver made specifically for RoboPeak displays.  But there's a workaround: you can use the AlphaCool LCD driver (Version 2.1).  The driver installation has to be forced due to the USB device ID mismatch (between AlphaCool and RoboPeak displays).
      The driver installation works as:
      Open Device Manager --> Other devices --> double-click on rp-usbdisp --> Update Driver button --> Browse my computer for driver software --> Let me pick from a list of available drivers on my computer --> Show All Devices --> Next button --> Have Disk button --> Browse button --> select acusbdisplay.inf file from the AlphaCool LCD driver folder --> Next button --> press Yes button on the Update Driver Warning message box.

      You can order a RoboPeak display from DFRobot at:
      https://www.dfrobot.com/product-1062.html#.UqfXHfSnoqX
      You can find the new AIDA64 beta update at:
      https://www.aida64.com/downloads/latesta64xebeta
      Please let us know if you find any difficulties enabling or using this new feature. Also let us know if you've got another kind of LCD device that is currently unsupported by AIDA64.
      Regards,
      Fiery
×
×
  • Create New...