Jump to content
AIDA64 Discussion Forum
ded32

Asus Rampage IV Extreme + AIDA64 + Asus AI Suite II: Thread creation error & wrong fan readings

Recommended Posts

Hello,

I noticed that on Asus Rampage IV Extreme, AIDA64 sometimes outputs "Thread creation error: Insufficient memory for this operation" and after that readings of OPT1, OPT3, Case 2 and PCH fans become 0.0 RPM (I have OPT2, Case 1 and Case 2 fans unconnected so cannot say anything about them). CPU fan and CPU OPT fan readings are still OK.

If I relaunch AIDA64 (File - Exit - Run again), readings become OK, and sometimes later the problem repeats.

I have to confess that I have ASUS Suite II installed (because and only because AIDA64 missed OPTx temp support on Asus R4E!). After installation of AIDA64 Beta, I stopped running it, but process explorer shows its modules loaded and running (FanControlHelper.exe etc). So this may be result of interaction of AIDA64 and ASUS' DLLs (http://forums.aida64...ndpost__p__5532). It's not a problem for me, I plan to uninstall ASUS software. Just leaving it now only to help you in testing :)

AIDA64 version: 2.50.2075 Beta.

P.S. Fiery, thanks a lot for your great work - from another R4E user :)

Never remove R4E support from AIDA64! :) BTW, you already have Option/Stability settings, you may add Asus Suite II compatibility there...

Share this post


Link to post
Share on other sites

Thank you for the info. The current solution in AIDA64 v2.60 uses separate code path when AI Suite is installed and when it is not installed. In both cases AIDA64 is now able to read all temperature, fan speed and voltage values. So if you don't need AI Suite, then make sure to uninstall it. AIDA64 will then be able to utilize its low-level functions about Rampage IV, and there should be no thread creation issues. We'll also try to find out why the thread creation problem comes up when AI Suite is installed.

BTW, please note that even if you close AI Suite application, its low-level service still continues to be running. So to avoid any potential conflicts between AIDA64 and AI Suite, you need to completely uninstall AI Suite.

Regards,

Fiery

Share this post


Link to post
Share on other sites

Thank you, Fiery.

I know about AI Suite modules, they can be seen in sysinternals' Process Explorer, for example.

If AIDA64 may produce debug logs (f.e. aida64.exe --secret-debug-mode-switch --debug-module=asusdll --verbose --destination=C:\Logs), and they may be useful for debugging, I can send them to you.

Share this post


Link to post
Share on other sites

If AIDA64 may produce debug logs (f.e. aida64.exe --secret-debug-mode-switch --debug-module=asusdll --verbose --destination=C:\Logs), and they may be useful for debugging, I can send them to you.

There's no such debugging or logging facility in AIDA64 :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Similar Content

    • By leghmoh
      Hello,
      Aida64 is reporting wrong VCCIN and DIMM AB and CD voltages, after overclocking.
      CPU is Intel 10940X and Memory is Corsair Dominator Platinum RGB 3600 Mhz.
       
      Thanks a Lot
       
      Best Regards
    • By btmouse
      ASUS ROG all-in-one liquid CPU cooler ,
      https://www.asus.com/Cooling/ROG-RYUO-240/

      https://www.asus.com/Cooling/ROG-RYUJIN-360/
       

    • By insp1re2600
      Hi,
      Will there be support for the ryujin 360 oled screen for hardware stats on non asus motherboards pulled from wmi?
      This would be hugely appreciated.
      Thanks
    • By Mors
      I don't see the pump speed etc. for the AIO. Is this a bug or does it need to be added ?
       
      Blah again this should be in bugs section. 
    • By Rockstonicko
      So I'm about at my wits end with this, this is such a bizarre issue. I've already submitted a ticket to Asus about this and they are "researching" why this is happening for the last 2 days but I've heard nothing back yet, so I figured I'd do the same for AIDA64 and see if there are any answers/suggestions/solutions or jokes to ease my insanity.

      AIDA64 Extreme ver. 6.10.5200 is the only hardware monitoring application I'm using as I've read multiple monitoring apps can cause the ITE IT8665E Super IO chip to bug out. (Among 1000 other things, is this thing just garbage or what?)
      I'm also using the Logitech LCD configuration in AIDA64 to display temperatures/clockspeeds/VRM current/power/etc. basically all the important information I can fit spread between 4 pages on my Logitech LCD. However, I'm not monitoring fan speeds on my LCD just in case that's causing an issue.
      After anywhere from 15 minutes to 2 hours, the fans I have connected to motherboard headers will stop spinning. After doing some experimentation and attempting to control the fans after they have stopped, I've figured out that the fan logic is randomly inverting. That is, 100% fan speed becomes 0%, and 0% becomes 100%, 66% fan speed becomes 34% fan speed etc. So after it happens, I can set the fans to 0% and they will spin back up to 100%, or to 34% and they will spin back up to 66%. So I have some form of solution, albeit not an ideal one.

      I've also noticed that once the logic reverse happens, the fan sensor values in AIDA64 either freeze at their reported value, or they just show 0 RPM depending on how it's feeling at that particular instance. If I'm not running AIDA64 this will not happen, but it's an inevitability whenever AIDA64 is running. Rebooting the PC or sleep/resume will correct the issue for another 15 minutes to 2 hours.

      Here are the only options I have enabled in the stability section of AIDA64:
      Load Kernel driver Low-Level MSR Low-Level PCI Low-Level SMBus Low-Level sensor Low-Level SMART SMBus access through ACPI GPU Sensor Support I have disabled Asus WMI sensor support because I read that can solve the issue, but it hasn't helped.

      This is also the second fresh install of Windows 10 on this machine, and it has happened during both installs. I'm on the latest 5220 BIOS, and changing all of the parameters of Q-Fan in the BIOS doesn't seem to have any effect.

      Specs:
      MB: Asus Prime X470-Pro CPU: AMD Ryzen 5 3600X RAM: 16GB G.Skill Ripjaws V 3600MHz GPU: AMD Radeon RX 5700 XT SSD's: Samsung 860 EVO 256GB + Samsung 840 Pro 128GB HDD's: Seagate Barracuda 2TB + Western Digital Blue 1TB PSU: Enermax Triathlor Eco 1000W  
×
×
  • Create New...